TCEL050

Home Optics Telecentric lenses TCEL series

TCEL050

Specifications

Downloads

Compatible products

Main optical specifications
Magnification	(x)	0.500
Magnification ranges at -2 dpt to +3 dpt	(x)	0.497 - 0.511
Image circle diameter	(mm)	11.0
Max sensor size		2/3″

Object field of view
1/3” (1)	(mm × mm)	9.60 x 7.20
1/2.5” (1)	(mm × mm)	11.40 x 8.56
1/2” (1)	(mm × mm)	12.80 x 9.60
1/1.8” (1)	(mm × mm)	14.26 x 10.66
2/3” (1)	(mm × mm)	17.00 x 14.18

Advanced optical specifications
Working distance (2)	(mm)	132.3
Working distance range (3)	(mm)	146.3 - 112.2
Working ƒ/N (4)		12
Telecentricity typical (max) (5)	(deg)	< 0.04 (0.08)
Telecentricity max (6)	(deg)	< 0.15
Distortion typical (max) (7)	(%)	< 0.1 (0.2)
Distortion max (6)	(%)	< 0.2
Depth of field (8)	(mm)	2.50
Resolution (9)	(μm)	15

Liquid lens specifications
Liquid lens model		Optotune EL-16-40
Temperature sensor		Yes
Focal power mode		Yes
Response time (10)	(ms)	5
Setting time (10)	(ms)	25
Current range	(mA)	-500 to +500
Repeatability using focal power mode	(dpt)	±0.05 (small steps); ±0.1 (large steps)
Lifecycles (10%-90% sinusoidal)		>1,000,000,000
Connector		HR10A-7R-6PB

Mechanical specifications
Mount		C
Phase adjustment (11)		Yes
Length (12)	(mm)	130.8
Front diameter	(mm)	37.7
Mass	(g)	354

Environmental specifications
Operating temperature	(°C)	0-40
Storage temperature	(°C)	0-50
Operating relative humidity	(%)	20-85, non condensing
Installation		Indoor use only

Last update 20 Oct 2023

Notes

Field of views are calculated at 0 dpt power of the liquid lens.
Working distance (nominal): distance between the front end of the mechanics and the object at 0 pdt power of the liquid lens.
Minimum and maximum working distance are reported at nominal range of the liquid lens; maximum excursion may be larger.
Working f-number (wf/N): the real f-number of a lens in operating conditions.
Maximum angle between chief rays and optical axis on the object side, evaluated at 0 dpt power of the liquid lens. Typical (average production) values and maximum (guaranteed) values are listed.
Maximum values calculated in the range -2 to +3 dpt of the liquid lens.
Percent deviation of the real image compared to an ideal, undistorted image, , evaluated at 0 dpt power of the liquid lens. Typical (average production) values and maximum (guaranteed) values are listed.
At the limits of the depth of field, the image can still be used for measurements. For a very sharp image, however, only half of the depth of field should be considered. Pixel size used for calculation is 3.45 μm.
Object side, calculated with the Rayleigh criterion with λ= 520 nm
Typical at 30°C, 0 to ±250 mA step.
Indicates the availability of an integrated camera phase adjustment feature.
Measured from the front end of the mechanics to the camera flange.

Ordering information

Hirose cables and liquid lens controller sold separately.

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.