Opto Engineering® - 20 years
Home Lighting LED illuminators LTCLHP series
LTCLHP016-R
Specifications
Downloads
Compatible products
Lighting specifications
Beam diameter (mm) 20
Working distance range (mm) 35 - 70
Light color, peak wavelength (1) red, 625 nm
Spectral FWHM (nm) 20
Electrical specifications
Supply voltage (2) (V) 12-24
Max power consumption (W) 2.5
LED forward voltage typical (max) (3) (V) 2.4 (3)
Max LED forward current (4) (mA) 350
Max pulse current (5) (mA) 2000
Connector M8
Cables CB244P1500 included
Mechanical specifications
Length (6) (mm) 99.9
Front diameter (mm) 37.7
Mass (g) 191
Environmental specifications
Operating temperature (°C) 0-40
Storage temperature (°C) 0-50
Operating relative humidity (%) 20-85, non condensing
Installation Indoor use only
Eye safety
Risk group according to CEI EN 62471:2010 Exempt

Last update 03 Aug 2023

CE
ROHS
REACH
WEEE
UKCA

Notes

  1. Opto Engineering® recommends green light for high precision measurement applications
  2. Tolerance ± 10%
  3. At max forward current. Tolerance is ± 0.06V on forward voltage measurements
  4. In continuous mode (not pulsed)
  5. At pulse width <= 10 ms and duty cycle <= 10%. Built-in electronics board must be bypassed (see tech info)
  6. Nominal value, with no spacers in place
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

Product user guide
LTCLHP manual

Datasheet

Download datasheet

Layout files

PDF
DXF
IGS
STEP
SLDPRT
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
CMBS series
CMBS series
45° beam splitters
CMBS016
45° beam splitter with mount for 37.7 mm clamping diameter optics
CPDPH01
Diffuser cap for telecentric illuminators, diffusive diameter 2.8 mm
CPDPH02
Diffuser cap for telecentric illuminators, diffusive diameter 0.8 mm
CPDPH03
Diffuser cap for telecentric illuminators, diffusive diameter 5.0 mm
CPDPH04
Diffuser cap for telecentric illuminators, diffusive diameter 12.0 mm
CMHO series
CMHO series
Clamping mechanics for lenses
CMHO016
Clamping mechanics for TCxx016 lenses and LTCLHP016-X illuminators
LTSCHP1W-R
Replacement LED module, red
LTDV series
LTDV series
LED lighting strobe controllers
LTDV1CH-17V
Strobe controller 1 channel variable current 5 mA - 17A
LTDVE1CH-40F
LED Strobe controller 1 channel, 40A pulsed - 4A continuous, fast version
LTIC series
LTIC series
LED lighting controllers
LTIC1CH-A1-4
Analogue lighting controller unit, 4A, 24V
LTIC1CH-D1-4
Digital lighting controller unit, 4A, 24V
LED1W-R
Replacement LED source, red, 625 nm
CBLT series
CBLT series
Cables for LED illuminators
CB244P1500
Power cable, side 1 M8 connector straight, side 2 cable end - 2 m - type 1 labels
CB244P1500L
Power cable, side 1 M8 connector angled, side 2 cable end - 2 m - type 1 labels
Request a quote
Add this product to the quote request list.