Image gallery | Resources | Opto Engineering

Image gallery

TC series

Bi-telecentric lenses for sensors up to 2/3”

Automotive

Telecentric image of an engine shaft

Rotor part acquired with a telecentric lens

Image of a pipe sampled by a TC lens

Image of a coil spring acquired with a telecentric setup

Electronics

BGAs

Pins

PCB printed circuit board

Hard disk head arm

Mechanical

Hair springs

Watch gears

Screws

Nuts

Glass & pharma

Glass

Blister packs

Vials

Needles

TC16M series

Telecentric lenses for sensors up to 43.3 mm and 8k line scan cameras

Electronics

Electronic board imaged with a TC16M telecentric lens

TC16M sample with collimated backlight

TC16M sample with collimated backlight

TC16M sample with collimated backlight

TC16M sample with collimated backlight

TCDP PLUS series

TCDP PLUS series

Dual magnification telecentric lenses

Electronic board imaging

Full FOV image with lens lower magnification

2x magnified image of the object central area

Mechanical component imaging

Full FOV image with lens' lower magnification

4X magnified image of the object central part

TCZRS series

Bi-telecentric zoom lenses with motorized control

Electronic board images at four different magnifications

Electronic board imaged by a TCZR, low magnification

Electronic board imaged by a TCZR, second-step magnification

Electronic board imaged by a TCZR, 3rd step magnification

Electronic board imaged by a TCZR, full magnification

Hard disk arm images at four different magnifications

Hard disk arm imaged by a TCZR, low magnification

TCZR acquiring image of hard disk arm

TCZR acquiring image of hard disk arm

Maximum magnification with TCZR

PC series

Pericentric lenses for 360° top and lateral view with just one camera

Examples of pericentric images

Reading a label on the side of a jar, with a PC lens positioned on top.

Full inspection of a battery with a PC-series optics.

Inspecting the threads of a bottle neck.

PCCD series

Catadioptric lenses for 360° top and lateral view with just one camera

Sample images taken with PCCD lenses

Bottle cap inspection to check the integrity of the plastic retaining ring

Inspection of the threads of a bottleneck

A small cap imaged with a catadioptric lens: both the top and side surfaces are perfectly focused.

PCHI series

Hole inspection lenses for 360° inside view in perfect focus

Examples of images taken with PCHI

Mechanical part inspection with PCHI

Conical cavity inspection is possible from both sides

The entire depth of a hole, writings inside a cavity, as well as scratches and tiny defects are easily imaged

Square, polygonal or irregular cross section objects can be inspected

PCPW series

Polyview optics for multiple side views in one image

Sample images taken with PCPW optics

Nut sample acquired with PCPW

PCPW imaging of an O-ring

Cap sample inspection with PCPW Polyview

PCMP series

Multi-view optics for measuring and imaging small parts

Sample application of PCMP optics

Mechanical components inspection: thread integrity, pitch and diameter can be verified and measured

SMD component inspection: integrated circuit position, rotation, pin integrity and bonding can be checked.

Electronic connector checking: presence/absence, alignment and length of pins can be precisely measured.

LED quality control: lens scratches, die centering and correct wiring can be inspected and measured.

Other samples of PCMP imaging

Electronic connector imaged by a PCMP micro-polyview

Sample coiling imaged by PCMP

Integrated circuit

TCCAGE series

Bi-telecentric system for multiple side imaging and measurement at 90°

Sample applications of TCCAGE imaging

360° gasket attachments viewed with TCCAGE

Vials inspected with TCCAGE

Checking needles with TCCAGE

A screw imaged from four sides simultaneously

MCSM1-01X

Variable macro lens with Scheimpflug adjustment

MCSM1-01X image a sample from an angled point of view

MCSM1-01X image a sample from an angled point of view

MCSM1-01X image a sample from an angled point of view

Without tilt adjustment, the object is not homogeneously focused

At the Scheimpflug angle, the image becomes sharp.

MC series

Nearly zero distortion macro lenses for sensors up to 2/3”

MC application samples

Sample 06

MC3-03X macro

Nearly zero distortion multi-configuration macro lens for sensors up to 2/3”

MC3-03X output samples

MC3-03X output

MC3-03X output

MC3-03X output

MC3-03X output

Example of SWIR imaging

Interior of a car: SWIR image taken with Opto E SW05020 lens and ABS GmbH SWIR camera IK1523. Image courtesy of ABS GmbH

Enhanced Imaging: SWIR image taken with Opto E SW05020 lens and ABS GmbH SWIR camera IK1523. Image courtesy of ABS GmbH

Inspection of liquid levels: SWIR image taken with Opto E SW05020 lens and ABS GmbH SWIR camera IK1523. Image courtesy of ABS GmbH

Inspection of liquid levels: SWIR image taken with Opto E SW05020 lens and ABS GmbH SWIR camera IK1523. Image courtesy of ABS GmbH

Detection of bruises on fruit. SWIR image taken with Opto E SW05020 lens and ABS GmbH SWIR camera IK1523. Image courtesy of ABS GmbH

Silicon is transparent in the SWIR waveband. SWIR image taken with Opto E SW05020 lens and ABS GmbH SWIR camera IK1523. Image courtesy of ABS GmbH

Solar cell inspection. SWIR image taken with Opto E SW05020 lens and ABS GmbH SWIR camera IK1523. Image courtesy of ABS GmbH

Inspection of liquid levels: SWIR image taken with Opto E SW05020 lens and ABS GmbH SWIR camera IK1523. Image courtesy of ABS GmbH