Opto Engineering® - 20 years Opto Engineering® - 20 years Opto Engineering. Our first 20 years →
Opto Engineering® - 20 years
Home Optics Telecentric lenses TCEL series
TCEL066

Specifications

Main optical specifications
Magnification (x) 0.670
Magnification ranges at -2 dpt to +3 dpt (x) 0.663 - 0.680
Image circle diameter (mm) 11.0
Max sensor size 2/3″
Object field of view
1/3” (1) (mm × mm) 7.16 x 5.37
1/2.5” (1) (mm × mm) 8.51 x 6.39
1/2” (1) (mm × mm) 9.55 x 7.16
1/1.8” (1) (mm × mm) 10.64 x 7.96
2/3” (1) (mm × mm) 12.69 x 10.58
Advanced optical specifications
Working distance (2) (mm) 132.3
Working distance range (3) (mm) 146.1 - 112.3
Working ƒ/N (4) 12
Telecentricity typical (max) (5) (deg) < 0.04 (0.08)
Telecentricity max (6) (deg) < 0.15
Distortion typical (max) (7) (%) < 0.1 (0.2)
Distortion max (6) (%) < 0.2
Field depth (8) (mm) 1.40
Resolution (9) (μm) 11
liquidlens_specifications
Liquid lens model EL-16-40
Temperature sensor Yes
Focal power mode Yes
Response time (10) (ms) 5
Setting time (10) (ms) 25
Current range (mA) -500 to +500
Repeatability using focal power mode (dpt) ±0.05 (small steps); ±0.1 (large steps)
Lifecycles (10%-90% sinusoidal) >1,000,000,000
Connector HR10A-7R-6PB
Mechanical specifications
Mount C
Phase adjustment (11) Yes
Length (12) (mm) 149.3
Front diameter (mm) 37.7
Mass (g) 408
Environmental specifications
Operating temperature (°C) 0-40
Storage temperature (°C) 0-50
Operating relative humidity (%) 20-85, non condensing
Installation Indoor use only

Last update 28 Sep 2022

CE
ROHS
REACH
WEEE

Notes

  1. Field of views are calculated at 0 dpt power of the liquid lens.
  2. Working distance (nominal): distance between the front end of the mechanics and the object at 0 pdt power of the liquid lens.
  3. Minimum and maximum working distance are reported at nominal range of the liquid lens; maximum excursion may be larger.
  4. Working f-number (wf/N): the real f-number of a lens in operating conditions.
  5. Maximum angle between chief rays and optical axis on the object side, evaluated at 0 dpt power of the liquid lens. Typical (average production) values and maximum (guaranteed) values are listed.
  6. Maximum values calculated in the range -2 to +3 dpt of the liquid lens.
  7. Percent deviation of the real image compared to an ideal, undistorted image, , evaluated at 0 dpt power of the liquid lens. Typical (average production) values and maximum (guaranteed) values are listed.
  8. At the borders of the field depth the image can be still used for measurement but, to get a perfectly sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm.
  9. Object side, calculated with the Rayleigh criterion with λ= 520 nm
  10. Typical at 30°C, 0 to ±250 mA step.
  11. Indicates the availability of an integrated camera phase adjustment feature.
  12. Measured from the front end of the mechanics to the camera flange.

Ordering information

Hirose cables and liquid lens controller sold separately.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Required field
Required field
Required field
Required field
Required field
Required field
Required field
Minimun length: 6 characters
Required field
captcha
Required field

Compatible products

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
LTPRHP3W series
LTPRHP3W series
LTPRHP3W-R
LED pattern projector 3W, red, 625 nm
LTPRHP3W-G
LED pattern projector 3W, green, 525 nm
LTPRHP3W-B
LED pattern projector 3W, blue, 460 nm
LTPRHP3W-W
LED pattern projector 3W, white, 6000 K
LTPRSMHP3W-R
Scheimpflug LED pattern projector 3W, red, 625 nm
LTPRSMHP3W-G
Scheimpflug LED pattern projector 3W, green, 525 nm
LTPRSMHP3W-B
Scheimpflug LED pattern projector 3W, blue, 460 nm
LTPRSMHP3W-W
Scheimpflug LED pattern projector 3W, white, 6000 K
LTCXC series
LTCXC series
Continuous LED coaxial lights
LT2QOG025-00-X-W-24V
LED coaxial light, 27x27 light emitting area, white, 6300 K, 24V
LT2QOG025-00-X-R-24V
LED coaxial light, 27x27 light emitting area, red, 630 nm, 24V
LT2QOG025-00-X-G-24V
LED coaxial light, 27x27 light emitting area, green, 525 nm, 24V
LT2QOG025-00-X-B-24V
LED coaxial light, 27x27 light emitting area, blue, 470 nm, 24V
LTBRDC series
LTBRDC series
Continuous LED bar lights
LTZPFL040-00-6-R-24V
LED bar light, 6 LED rows, 40x26.3 illumination area, red, 630 nm, 24V
LTZPFL040-00-6-G-24V
LED bar light, 6 LED rows, 40x26.3 illumination area, green, 525 nm, 24V
LTZPFL040-00-6-B-24V
LED bar light, 6 LED rows, 40x26.3 illumination area, blue, 470 nm, 24V
LTZPFL040-00-6-W-24V
LED bar light, 6 LED rows, 40x26.3 illumination area, white, 6300 K, 24V
LTZZO130-75-3-W-24V
LED low angle ring light, 3 LED rows, outer diameter 131 mm, 75°, white, 6300 K, 24V
LTZZO130-75-3-R-24V
LED low angle ring light, 3 LED rows, outer diameter 131 mm, 75°, red, 630 nm, 24V
LTZZO130-75-3-G-24V
LED low angle ring light, 3 LED rows, outer diameter 131 mm, 75°, green, 525 nm, 24V
LTZZO130-75-3-B-24V
LED low angle ring light, 3 LED rows, outer diameter 131 mm, 75°, blue, 470 nm, 24V
LT3RZF080-60-1-W-24V
LED ring light, 1 LED rows, 81.0 mm outer diameter, 60°, white, 6300 K, 24V
LT3RZF080-60-1-R-24V
LED ring light, 1 LED rows, 81.0 mm outer diameter, 60°, red, 630 nm, 24V
LT3RZF080-60-1-G-24V
LED ring light, 1 LED rows, 81.0 mm outer diameter, 60°, green, 525 nm, 24V
LT3RZF080-60-1-B-24V
LED ring light, 1 LED rows, 81.0 mm outer diameter, 60°, blue, 470 nm, 24V
LTRNDC series
LTRNDC series
Continuous LED direct ring lights
LTZGK050-15-2-R-24V
LED ring light, 2 LED rows, 50.0 mm outer diameter, 15°, red, 630 nm, 24V
LTZGK050-15-2-G-24V
LED ring light, 2 LED rows, 50.0 mm outer diameter, 15°, green, 525 nm, 24V
LTZGK050-15-2-B-24V
LED ring light, 2 LED rows, 50.0 mm outer diameter, 15°, blue, 470 nm, 24V
LTZGK050-15-2-W-24V
LED ring light, 2 LED rows, 50.0 mm outer diameter, 15°, white, 6300 K, 24V
LTZGK070-45-3-R-24V
LED ring light, 3 LED rows, 70.0 mm outer diameter, 45°, red, 630 nm, 24V
LTZGK070-45-3-G-24V
LED ring light, 3 LED rows, 70.0 mm outer diameter, 45°, green, 525 nm, 24V
LTZGK070-45-3-B-24V
LED ring light, 3 LED rows, 70.0 mm outer diameter, 45°, blue, 470 nm, 24V
LTZGK070-45-3-W-24V
LED ring light, 3 LED rows, 70.0 mm outer diameter, 45°, white, 6300 K, 24V
LTRN016NW
Ring LED illuminator, inner diameter 37.7 mm, straight type, white, 6300 K
LTCLHP016-G
Telecentric HP illuminator, beam diameter 20 mm, green, 525 nm
LTPVRG25X36-00-1-W-24V
Flat side-emitting LED backlight, thin borders, 36x25 mm illumination area, white, 6300 K, 24V
LTPVRG25X36-00-1-R-24V
Flat side-emitting LED backlight, thin borders, 36x25 mm illumination area, red, 630 nm, 24V
LTPVRG25X36-00-1-G-24V
Flat side-emitting LED backlight, thin borders, 36x25 mm illumination area, green, 525 nm, 24V
LTPVRG25X36-00-1-B-24V
Flat side-emitting LED backlight, thin borders, 36x25 mm illumination area, blue, 470 nm, 24V
CB series
CB series
Cables
CBGPIO6PMF-3M
6 Pin Hirose Male - Female moulded connector cable, 3 m
ELDV series
ELDV series
Controllers for liquid lens modules
RT-EL-E-4i
Controllers for liquid lens modules industrial version
CMHO series
CMHO series
Clamping mechanics for lenses
CMHO016
Clamping mechanics for TCxx016 lenses and LTCLHP016-X illuminators
CMBS series
CMBS series
45° beam splitters
CMBS016
45° beam splitter with mount for 37.7 mm clamping diameter optics