Opto Engineering® - 20 years
Home Optics Telecentric lenses TCEL series
TCEL23036
Specifications
Downloads
Compatible products
Main optical specifications
Magnification (x) 0.243
Magnification ranges at -2 dpt to +3 dpt (x) 0.239 - 0.250
Image circle diameter (mm) 11.0
Max sensor size 2/3″
Object field of view
1/3” (1) (mm × mm) 19.75 x 14.81
1/2.5” (1) (mm × mm) 23.46 x 17.61
1/2” (1) (mm × mm) 26.34 x 19.75
1/1.8” (1) (mm × mm) 29.34 x 21.93
2/3” (1) (mm × mm) 34.98 x 29.18
Advanced optical specifications
Working distance (2) (mm) 102.5
Working distance range (3) (mm) 122.9 - 73.2
Working ƒ/N (4) 8
Telecentricity typical (max) (5) (deg) < 0.08 (0.1)
Telecentricity max (6) (deg) < 0.15
Distortion typical (max) (7) (%) < 0.04 (0.1)
Distortion max (6) (%) < 0.15
Depth of field (8) (mm) 7.00
Resolution (9) (μm) 21
Liquid lens specifications
Liquid lens model Optotune EL-16-40
Temperature sensor Yes
Focal power mode Yes
Response time (10) (ms) 5
Setting time (10) (ms) 25
Current range (mA) -500 to +500
Repeatability using focal power mode (dpt) ±0.05 (small steps); ±0.1 (large steps)
Lifecycles (10%-90% sinusoidal) >1,000,000,000
Connector HR10A-7R-6PB
Mechanical specifications
Mount C
Phase adjustment (11) Yes
Length (12) (mm) 166.4
Front diameter (mm) 61.0
Mass (g) 539
Environmental specifications
Operating temperature (°C) 0-40
Storage temperature (°C) 0-50
Operating relative humidity (%) 20-85, non condensing
Installation Indoor use only

Last update 20 Oct 2023

ROHS
REACH
WEEE

Notes

  1. Field of views are calculated at 0 dpt power of the liquid lens.
  2. Working distance (nominal): distance between the front end of the mechanics and the object at 0 pdt power of the liquid lens.
  3. Minimum and maximum working distance are reported at nominal range of the liquid lens; maximum excursion may be larger.
  4. Working f-number (wf/N): the real f-number of a lens in operating conditions.
  5. Maximum angle between chief rays and optical axis on the object side, evaluated at 0 dpt power of the liquid lens. Typical (average production) values and maximum (guaranteed) values are listed.
  6. Maximum values calculated in the range -2 to +3 dpt of the liquid lens.
  7. Percent deviation of the real image compared to an ideal, undistorted image, , evaluated at 0 dpt power of the liquid lens. Typical (average production) values and maximum (guaranteed) values are listed.
  8. At the limits of the depth of field, the image can still be used for measurements. For a very sharp image, however, only half of the depth of field should be considered. Pixel size used for calculation is 3.45 μm.
  9. Object side, calculated with the Rayleigh criterion with λ= 520 nm
  10. Typical at 30°C, 0 to ±250 mA step.
  11. Indicates the availability of an integrated camera phase adjustment feature.
  12. Measured from the front end of the mechanics to the camera flange.

Additional notes

Performances calculated with monochromatic light (LED emission); performance range in white light is smaller.

Ordering information

Hirose cables and liquid lens controller sold separately.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

Product user guide
Back focal adjustment

Datasheet

Download datasheet

Layout files

DXF
IGS
PDF
STEP
SLDPRT
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
ITA50-GM-10C-EL
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
ITA50-GC-10C-EL
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
COE-G series
COE-G series
GenICam® PoE C-mount cameras
COE-050-M-POE-060-IR-C
Area scan camera IMX264, CMOS, Global shutter, 2448 x 2048, 5.0 MP, 3.45 μm, 2/3", Mono, 24.2 fps, 1 GigE, POE, C-mount, AR filter
COE-050-C-POE-060-IR-C
Area scan camera IMX264, CMOS, Global shutter, 2448 x 2048, 5.0 MP, 3.45 μm, 2/3", Color, 8.1 fps, 1 GigE, POE, C-mount, IR cut filter
LTBC series
LTBC series
Continuous LED backlight
LTBC054054-W
Continuos LED backlight, 54.5x54.5 mm illumination area, white, 6300 K
LTBC054054-G
Continuos LED backlight, 54.5x54.5 mm illumination area, green, 525 nm
LTPVR070-00-1-W-24V
Flat side-emitting LED backlight, 70x70 mm illumination area, white, 6300 K, 24V
LTPVR070-00-1-R-24V
Flat side-emitting LED backlight, 70x70 mm illumination area, red, 630 nm, 24V
LTPVR070-00-1-G-24V
Flat side-emitting LED backlight, 70x70 mm illumination area, green, 525 nm, 24V
LTPVR070-00-1-B-24V
Flat side-emitting LED backlight, 70x70 mm illumination area, blue, 470 nm, 24V
LTPVRG070-00-1-W-24V
Flat side-emitting LED backlight, thin borders, 70x70 mm illumination area, white, 6300 K, 24V
LTPVRG070-00-1-R-24V
Flat side-emitting LED backlight, thin borders, 70x70 mm illumination area, red, 630 nm, 24V
LTPVRG070-00-1-G-24V
Flat side-emitting LED backlight, thin borders, 70x70 mm illumination area, green, 525 nm, 24V
LTPVRG070-00-1-B-24V
Flat side-emitting LED backlight, thin borders, 70x70 mm illumination area, blue, 470 nm, 24V
LTCLHP036-R
Telecentric HP illuminator, beam diameter 45 mm, red, 625 nm
LTCLHP036-G
Telecentric HP illuminator, beam diameter 45 mm, green, 525 nm
LTCLHP036-B
Telecentric HP illuminator, beam diameter 45 mm, blue, 460 nm
LTCLHP036-W
Telecentric HP illuminator, beam diameter 45 mm, white, 6000 K
LTRN036RD
Ring LED illuminator, inner diameter 61.0 mm, straight type, red, 630 nm
LTRN036GR
Ring LED illuminator, inner diameter 61.0 mm, straight type, green, 525 nm
LTRN036BL
Ring LED illuminator, inner diameter 61.0 mm, straight type, blue, 470 nm
LTRN036NW
Ring LED illuminator, inner diameter 61.0 mm, straight type, white, 6300 K
LTLAB2-W
Diffusive strobed low angle ring light illuminator - medium size high power white
LTLAB2-G
Diffusive strobed low angle ring light illuminator - medium size high power green
LTLAB2-R
Diffusive strobed low angle ring light illuminator - medium size high power red
LTLAC1-W
Diffusive strobed low angle ring light illuminator - large size medium power white
LTLAC2-W
Diffusive strobed low angle ring light illuminator - large size high power white
LTLAC2-G
Diffusive strobed low angle ring light illuminator - large size high power green
LTLAC2-R
Diffusive strobed low angle ring light illuminator - large size high power red
LT3RZF100-60-1-W-24V
LED ring light, 1 LED rows, 105.2 mm outer diameter, 60°, white, 6300 K, 24V
LT3RZF100-60-1-R-24V
LED ring light, 1 LED rows, 105.2 mm outer diameter, 60°, red, 630 nm, 24V
LT3RZF100-60-1-G-24V
LED ring light, 1 LED rows, 105.2 mm outer diameter, 60°, green, 525 nm, 24V
LT3RZF100-60-1-B-24V
LED ring light, 1 LED rows, 105.2 mm outer diameter, 60°, blue, 470 nm, 24V
LTZZO130-75-3-W-24V
LED low angle ring light, 3 LED rows, outer diameter 131 mm, 75°, white, 6300 K, 1 channel, 24V
LTZZO130-75-3-R-24V
LED low angle ring light, 3 LED rows, outer diameter 131 mm, 75°, red, 630 nm, 1 channel, 24V
LTZZO130-75-3-G-24V
LED low angle ring light, 3 LED rows, outer diameter 131 mm, 75°, green, 525 nm, 1 channel, 24V
LTZZO130-75-3-B-24V
LED low angle ring light, 3 LED rows, outer diameter 131 mm, 75°, blue, 470 nm, 1 channel, 24V
LTBRDC series
LTBRDC series
Continuous LED bar lights
LTZPFL080-00-6-R-24V
LED bar light, 6 LED rows, 80x26.3 illumination area, red, 630 nm, 24V
LTZPFL080-00-6-G-24V
LED bar light, 6 LED rows, 80x26.3 illumination area, green, 525 nm, 24V
LTZPFL080-00-6-B-24V
LED bar light, 6 LED rows, 80x26.3 illumination area, blue, 470 nm, 24V
LTZPFL080-00-6-W-24V
LED bar light, 6 LED rows, 80x26.3 illumination area, white, 6300 K, 24V
LTCXC series
LTCXC series
Continuous LED coaxial lights
LT2QOG040-00-X-W-24V
LED coaxial light, 48x48 light emitting area, white, 6300 K, 24V
LT2QOG040-00-X-R-24V
LED coaxial light, 48x48 light emitting area, red, 630 nm, 24V
LT2QOG040-00-X-G-24V
LED coaxial light, 48x48 light emitting area, green, 525 nm, 24V
LT2QOG040-00-X-B-24V
LED coaxial light, 48x48 light emitting area, blue, 470 nm, 24V
CMBS series
CMBS series
45° beam splitters
CMBS036
45° beam splitter with mount for 61.0 mm clamping diameter optics
CMMR series
CMMR series
45° first surface mirrors
CMMR036
45° first surface mirror for 61.0 mm clamping diameter optics
WI series
WI series
Protective windows for lenses
WI036
Protective window for 61 mm clamping diameter optics
CMHO series
CMHO series
Clamping mechanics for lenses
CMHO036
Clamping mechanics for TCxx036 lenses and LTCLHP036-X illuminators
PT036-056
Calibration pattern
PT036-056-C
Checkerboard calibration pattern for telecentric lens with certificate
ELDV series
ELDV series
Controllers for liquid lens modules
RT-EL-E-4i
Controllers for liquid lens modules industrial version
CB series
CB series
Cables
CBGPIO6PMF-3M
6 Pin Hirose Male - Female moulded connector cable, 3 m
CBGPEL12P6P-03M
I/O cable, side 1 HIROSE 12 pin, side 2 HIROSE 6 pin, 0.3 m
CBGPIO12PY6P-3M
I/O cable, side 1 HIROSE 12 pin, side 2 HIROSE 6 pin, side 3 cable end, 3m+0.3m
Request a quote
Add this product to the quote request list.