Specifications
Downloads
Compatible products
| Main optical specifications | ||
| Magnification | (x) | 0.561 |
| Image circle diameter | (mm) | 43.3 |
| Max sensor size | 35 mm Full Frame | |
| Object field of view | ||
| APS-C IMX342 | (mm × mm) | 39.86 x 29.89 |
| CHR70M | (mm × mm) | 55.26 x 39.20 |
| Line 8k-5µm | mm | 72.73 |
| Full Frame | (mm × mm) | 64.17 x 42.78 |
| CMV50000 | (mm × mm) | 64.94 x 49.23 |
| Advanced optical specifications | ||
| Working distance (1) | (mm) | 170.6 |
| Working ƒ/N (2) | 16 | |
| Telecentricity typical (max) (3) | (deg) | < 0.04 (0.08) |
| Distortion typical (max) (4) | (%) | < 0.06 (0.15) |
| Depth of field (5) | (mm) | 4.20 |
| Resolution (6) | (μm) | 18 |
| Mechanical specifications | ||
| Mount (7) | F | |
| Phase adjustment (8) | No | |
| Length (9) | (mm) | 359.6 |
| Front diameter | (mm) | 100 |
| Mass | (g) | 1294 |
Last update 21 May 2024
Notes
- Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion.
- Working f-number (wf/N): the real f-number of a lens in operating conditions.
- Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
- Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
- At the limits of the depth of field, the image can still be used for measurements. For a very sharp image, however, only half of the depth of field should be considered. Pixel size used for calculation is 5.5 μm.
- Object side, calculated with the Rayleigh criterion with λ= 520 nm
- FD stands for Flange Distance (in mm), defined as the distance from the mounting flange (the “metal ring” in rear part of the lens) to the camera detector plane.
- Indicates the availability of an integrated camera phase adjustment feature.
- Measured from the front end of the mechanics to the camera flange.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
LTCLHP064-R
Telecentric HP illuminator, beam diameter 80 mm, red, 625 nm
LTCLHP064-G
Telecentric HP illuminator, beam diameter 80 mm, green, 525 nm
LTCLHP064-B
Telecentric HP illuminator, beam diameter 80 mm, blue, 460 nm
LTCLHP064-W
Telecentric HP illuminator, beam diameter 80 mm, white, 6000 K
LTRN064RD
Ring LED illuminator, inner diameter 100.0 mm, straight type, red, 630 nm
LTRN064GR
Ring LED illuminator, inner diameter 100.0 mm, straight type, green, 525 nm
LTRN064BL
Ring LED illuminator, inner diameter 100.0 mm, straight type, blue, 470 nm
LTRN064NW
Ring LED illuminator, inner diameter 100.0 mm, straight type, white, 6300 K
LTRN064IR
Ring LED illuminator, inner diameter 100.0 mm, straight type, IR, 850 nm
LTRN064UV
Ring LED illuminator, inner diameter 100.0 mm, straight type, UV, 365 nm
CMBS064
45° beam splitter with mount for 100.0 mm clamping diameter optics
CMMR064
45° first surface mirror for 100.0 mm clamping diameter optics
WI064
Protective window for 100 mm clamping diameter optics
CMHO064
Clamping mechanics for TCxx064 lenses and LTCLHP064-X illuminators
PT064-096
Calibration pattern
PT064-096-C
Checkerboard calibration pattern for telecentric lens with certificate
PT064-096-P
Calibration pattern
CMTH064
Precision alignment mechanics for telecentric setup
CMWF064
Holder for WI series, clamping diameter 100 mm
Request a quote
Add this product to the quote request list.
Product images
