Optics finder Lighting finder Camera finder Imaging lens selector

Get the right product, right from the start

LTPRSMHP3W-W

Scheimpflug LED pattern projector 3W, white, 6000 K

Download datasheet

← Prev

Specifications

Lighting specifications
Active area	(mm x mm)	8 x 8
Max pattern tilt	(deg)	45
Light color, peak wavelength		white, 6000 K
Spectral FWHM	(nm)	-
Illuminance (1)	(klux)	30
Electrical specifications
Operating mode (2)		Continuous and strobe
Supply voltage (3)	(V)	12-24
Power consumption	(W)	4.5
LED forward voltage typical (max) (4)	(V)	2.8 (-)
Max LED forward current (5)	(mA)	720
Max pulse current (6)	(mA)	2000
Estimated MTBF (7)	(hours)	> 100000
Connector		M8
Cables		CB244P1500 included
Mechanical specifications
Mount		C
Phase adjustment		Yes
Diameter	(mm)	38.5
Length	(mm)	90.8
Mass	(g)	153
Environmental specifications
Operating temperature	(°C)	0-40
Storage temperature	(°C)	0-50
Operating relative humidity	(%)	20-85, non condensing
Installation		Indoor use only
Eye safety
Risk group according to CEI EN 62471:2010		Risk group 1

Last update: 15 Apr 2022

Notes

With a 35 mm lens, F/N 1.4 at 100 mm working distance without projection pattern at maximum driving current. Estimated value.
To pulse LTRPSMHP3W, models built-in electronics must be bypassed in order to drive the LED directly.
Tolerance ± 10%
Max continuous LED driving current is supplied through the built-in electronics. No external controller is required.
At max forward current. Tolerance is ± 0.06V on forward voltage measurements
At pulse width <= 10 ms and duty cycle <= 10%. Built-in electronics board must be bypassed (see tech info)
At 55 °C, 720mA.

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

pdf dxf igs step sldprt

Compatible products

TCEL series

Telecentric optics with liquid lens technology

+ View all products

TCEL050	Telecentric lens for 2/3" sensors with integrated liquid lens, mag. 0.500x
TCEL066	Telecentric lens for 2/3" sensors with integrated liquid lens, mag. 0.670x
TCEL075	Telecentric lens for 2/3" sensors with integrated liquid lens, mag. 0.750x
TCEL150	Telecentric lens for 2/3" sensors with integrated liquid lens, mag. 1.500x
TCEL250	Telecentric lens for 2/3" sensors with integrated liquid lens, mag. 2.500x
TCEL350	Telecentric lens for 2/3" sensors with integrated liquid lens, mag. 3.500x

TCLWD series

132 mm working distance telecentric lenses for sensors up to 2/3”

+ View all products

TCLWD050	Long working distance telecentric lens for 2/3" sensors, WD 132.3 mm, magnification 0.500x, C-mount
TCLWD066	Long working distance telecentric lens for 2/3" sensors, WD 132.3 mm, magnification 0.660x, C-mount
TCLWD075	Long working distance telecentric lens for 2/3" sensors, WD 132.3 mm, magnification 0.750x, C-mount
TCLWD150	Long working distance telecentric lens for 2/3" sensors, WD 132.3 mm, magnification 1.500x, C-mount
TCLWD250	Long working distance telecentric lens for 2/3" sensors, WD 132.3 mm, magnification 2.500x, C-mount
TCLWD350	Long working distance telecentric lens for 2/3" sensors, WD 132.3 mm, magnification 3.500x, C-mount

PTPR series

Projection patterns for LED projectors

+ View all products

PT00000100P	Single line projection pattern, Photolitography
PT00000100L	Single line projection pattern, Laser engraving
PT00000200P	Cross projection pattern, Photolitography
PT00000200L	Cross projection pattern, Laser engraving
PT00000300P	Stripes projection pattern, Photolitography
PT00000300L	Stripes projection pattern, Laser engraving
PT00000400P	Grid projection pattern, Photolitography
PT00000400L	Grid projection pattern, Laser engraving
PT00000500P	Edge projection pattern, Photolitography
PT00000500L	Edge projection pattern, Laser engraving
PTST050450P	Stripes projection pattern, Photolitography
PTST050200P	Stripes projection pattern, Photolitography
PTST050100P	Stripes projection pattern, Photolitography
PTST050050P	Stripes projection pattern, Photolitography
PTST010010P	Stripes projection pattern, Photolitography
PTST020020P	Stripes projection pattern, Photolitography
PTGR050450P	Grid projection pattern, Photolitography
PTGR050200P	Grid projection pattern, Photolitography
PTGR050100P	Grid projection pattern, Photolitography
PTGR050050P	Grid projection pattern, Photolitography
PTCD010P	Cloud of dots, density 10.5% projection pattern, Photolitography
PTCD020P	Cloud of dots, density 20% projection pattern, Photolitography
PTCD035P	Cloud of dots, density 35% projection pattern, Photolitography

LTSCHP series

High-performance replacement LED modules

+ View all products

LTSCHP3W‑W

Replacement LED module 3W, white

LTDV series

LED Strobe controllers

+ View all products

LTDV1CH‑17V

Strobe controller 1 channel variable current 5 mA - 17A

CB series

Cables

+ View all products

CB244P1500	Power cable, side 1 M8 connector straight, side 2 cable end - 2 m - type 1 labels
CB244P1500L	Power cable, side 1 M8 connector angled, side 2 cable end - 2 m - type 1 labels

LTIC series

LED lighting controllers

+ View all products

LTIC1CH‑A1‑4	Analogue lighting controller unit, 4A, 24V
LTIC1CH‑D1‑4	Digital lighting controller unit, 4A, 24V

Company & Resources

Optical imaging technologies Opto Engineering® for the environment Who we are A history of innovation Committed to quality Joint ventures Where we are Legal Awards Corporate videos 2D and 3D models Image gallery Video gallery Search OE products by applications Application notes Basics Frequently asked questions Press Review Jobs at Opto Engineering^®

Fiscal code and registration number at Mantova Business Register 02011230204, Nr. REA: MN-216669, Share Capital: 200.000,00 €
Design & development by Opto Engineering® → SEO and consulting by Dipiemme Studio

Company & Resources

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT

Company & Resources

Follow us

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT