Company

Service

Resources

Basics

F.A.Q.

Support

Careers

Press Review

Optics

Lighting

Cameras

Software

Accessories

AI Vision Units

LTPRSMHP3W-R

3D LED pattern projector 3W, HP, red

Optical specifications
Light color, peak wavelength		red, 630 nm
Device power ratings
Minimum DC Voltage	(V)	12
Maximum DC voltage	(V)	24
Power consumption	(W)	< 4.5
Max Forward current (1)	(mA)	720
Cable		CB244P1500 included
LED power ratings
Forward voltage (typical) (2, 3)	(V)	2.4
Forward voltage (max) (2, 3)	(V)	3.00
Max pulse current (4)	(mA)	2000
Mechanical specifications
Mass	(g)	316
Eye safety
Risk group according to CEI EN 62471:2010		Exempt

Notes

Tolerance ±10%
Used in continuous (not pulsed) mode.
At max forward current.
Tolerance is ±0.06V on forward voltage measurements.
At pulse width <= 10 ms, duty cycle <= 10% condition. Built-in electronics board must be bypassed (see tech info online).

Connection

Device side - male pins
Front view

Pinout reference

Pin: Function

1: Earth
2: GND
3: LED Anode
4: Power supply (+12÷24 V)

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

Compatible products

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.

TCLWD series

Long working distance telecentric lenses for 2/3″ detectors

+ click to view all

TCLWD050	Long working distance telecentric lens for 2/3″ detectors, WD 132.3 mm, magnification 0.50x, C-mount
TCLWD066	Long working distance telecentric lens for 2/3″ detectors, WD 132.3 mm, magnification 0.66x, C-mount
TCLWD075	Long working distance telecentric lens for 2/3″ detectors, WD 132.3 mm, magnification 0.75x, C-mount
TCLWD150	Long working distance telecentric lens for 2/3″ detectors, WD 132.3 mm, magnification 1.50x, C-mount
TCLWD250	Long working distance telecentric lens for 2/3″ detectors, WD 132.3 mm, magnification 2.50x, C-mount
TCLWD350	Long working distance telecentric lens for 2/3″ detectors, WD 132.3 mm, magnification 3.50x, C-mount

LTDV series

Strobe controllers

+ click to view all

LTDV1CH‑17V

Strobe controller 1 channel variable current 5 mA - 17A

PTPR series

Projection patterns for machine vision

+ click to view all

PT00000100P	Line pattern, photolitography
PT00000100L	Line pattern, laser engraved
PT00000200P	Cross pattern
PT00000200L	Cross pattern
PT00000300P	Stripe pattern
PT00000300L	Stripe pattern
PT00000400P	Grid pattern
PT00000400L	Grid pattern
PT00000500P	Edge pattern
PT00000500L	Edge pattern
PTST050450P	Stripe pattern
PTST050200P	Stripe pattern
PTST050100P	Stripe pattern
PTST050050P	Stripe pattern
PTST010010P	Stripe pattern
PTST020020P	Stripe pattern
PTGR050450P	Grid pattern
PTGR050200P	Grid pattern
PTGR050100P	Grid pattern
PTGR050050P	Grid pattern
PTCD010P	Cloud of dots pattern, density 10.5%
PTCD020P	Cloud of dots pattern, density 20%
PTCD035P	Cloud of dots pattern, density 35%

LTSCHP series

High-performance replacement LED modules

+ click to view all

LTSCHP3W‑R

Replacement LED module 3W HP, red

CB series

Cables

+ click to view all

CB244P1500	Power cable, side 1 M8 connector straight, side 2 cable end - 2 m - type 1 labels
CB244P1500L	Power cable, side 1 M8 connector angled, side 2 cable end - 2 m - type 1 labels

LTIC series

Light intensity controllers

+ click to view all

LTIC1CH‑A1‑4	Analogue lighting controller unit, 4A, 24V
LTIC1CH‑D1‑4	Digital lighting controller unit, 4A, 24V

Design & development by Opto Engineering → SEO and consulting by Dipiemme Studio