Opto Engineering® - 20 years Opto Engineering® - 20 years Opto Engineering. Our first 20 years →
Opto Engineering® - 20 years
Home Optics Telecentric lenses TCHR CORE PLUS series
TCCP5MHR192-F

Specifications

Main optical specifications
Magnification (x) 0.088
Image shape dimension (1) (mm x mm) 19.82 x 14.88
Max sensor size 4/3″
Object field of view
1/1.2″ (mm × mm) 129.71 x 81.49
1″ (mm × mm) 162.17 x 85.83
1.1″ (mm × mm) 161.83 x 118.51
1.3" (mm × mm) 164.57 x 164.57
4/3″ (mm × mm) 200.00 x 121.26
Advanced optical specifications
Working distance (2) (mm) 288.0
Working ƒ/N (3) 12
Telecentricity typical (max) (4) (deg) < 0.12 (0.18)
Distortion typical (max) (5) (%) < 0.8
Residual distortion (6) (%) < 0.01
Field depth (7) (mm) 81.10
Resolution (8) (μm) 87
Mechanical specifications
Mount C
Phase adjustment (9) Yes
Dimension A (10) (mm) 410
Dimension B (mm) 344
Dimension C (11) (mm) 373
Mass (g) 9195

Last update 23 Jun 2022

REACH
PATENTED

Notes

  1. Given the squared shape of the front window, the lens forms a rectangular image (Tech Info for related drawing).
  2. Working distance: distance between the front end of the mechanics and the object. Set this distance within ± 5% of the nominal value for maximum resolution and minimum distortion.
  3. Working f-number (wf/N): the real f-number of a lens in operating conditions.
  4. Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
  5. Percent deviation of the real image compared to an ideal, undistorted image: maximum (guaranteed) values of the uncorrected image are listed.
  6. Residual distortion after calibration with TCLIB Suite software library, using a PTCP calibrations pattern and a fully GenICam compliant camera. For setup information see related table.
  7. Object side, calculated with the Rayleigh criterion with λ= 520 nm
  8. At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm.
  9. Indicates the availability of an integrated camera phase adjustment feature.
  10. Maximum dimension of the clamping flange.
  11. Measured from the front end of the mechanics to the camera flange.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Required field
Required field
Required field
Required field
Required field
Required field
Required field
Required field
Minimun length: 6 characters
Required field
Required field

Compatible products

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
LTCLHP144-R
Telecentric HP illuminator, beam diameter 180 mm, red, 625 nm
LTCLHP144-G
Telecentric HP illuminator, beam diameter 180 mm, green, 525 nm
LTCLHP192-R
Telecentric HP illuminator, beam diameter 250 mm, red, 625 nm
LTCLHP192-G
Telecentric HP illuminator, beam diameter 250 mm, green, 525 nm
LTCLHP192-W
Telecentric HP illuminator, beam diameter 250 mm, white, 6000 K
LTBC series
LTBC series
Continuous LED backlight
LTBC234234-W
Continuos LED backlight, 234.5x235.5 mm illumination area, white, 6300 K
LTBC234234-G
Continuos LED backlight, 234.5x234.5 mm illumination area, green, 525 nm
LTBP series
LTBP series
High power strobed LED backlights
LTBP240180-R
High power strobed LED backlight, 240x180 illumination area, red, 625 nm
LTBP240180-G
High power strobed LED backlight, 240x180 illumination area, green, 525 nm
LTBP240180-B
High power strobed LED backlight, 240x180 illumination area, blue, 470 nm
LTBP240180-W
High power strobed LED backlight, 240x180 illumination area, white, > 4500 K
LT2BC240180-R
High uniformity continuous LED backlights, 240x180 mm illumination area, red, 620 nm
LT2BC240180-G
High uniformity continuous LED backlights, 240x180 mm illumination area, green, 525 nm
LT2BC240180-B
High uniformity continuous LED backlights, 240x180 mm illumination area, blue, 470 nm
LT2BC240180-W
High uniformity continuous LED backlights, 240x180 mm illumination area, white, > 4500 K
PTCP-M1-LR1-C
Checkerboard calibration pattern for telecentric lens with certificate
PTCP-M1-HR1-C
Checkerboard calibration pattern for telecentric lens with certificate