Opto Engineering® - 20 years
Home Optics Telecentric lenses TCCX series
TCCX250-G
Specifications
Downloads
Compatible products
Main optical specifications
Magnification (x) 2.500
Image circle diameter (mm) 11.0
Max sensor size 2/3″
Object field of view
1/3” (mm × mm) 1.92 x 1.44
1/2.5” (mm × mm) 2.28 x 1.71
1/2” (mm × mm) 2.56 x 1.92
1/1.8” (mm × mm) 2.85 x 2.13
2/3” (mm × mm) 3.40 x 2.84
Advanced optical specifications
Working distance (1) (mm) 132.3
Working ƒ/N (2) 20
Telecentricity typical (max) (3) (deg) < 0.04 (0.06)
Distortion typical (max) (4) (%) < 0.05 (0.10)
Depth of field (5) (mm) 0.20
Resolution (6) (μm) 5
Lighting specifications
Light color, peak wavelength green, 525 nm
Spectral FWHM (nm) 40
Electrical specifications
Supply voltage (V) 12-24
Max power consumption (W) 2.5
LED voltage (7) (V) 3.3 (4.0)
LED current (8) (mA) 350
Max pulse current (9) (mA) 2000
Connector M8
Cables CB244P1500 included
Mechanical specifications
Mount C
Phase adjustment Yes
Length (10) (mm) 163.9
Front diameter (mm) 37.7
Mass (g) 556
Environmental specifications
Operating temperature (°C) 0-40
Storage temperature (°C) 0-50
Operating relative humidity (%) 20-85, non condensing
Installation Indoor use only
Eye safety
Risk group according to CEI EN 62471:2010 Exempt

Last update 05 Sep 2023

CE
ROHS
REACH
WEEE
UKCA

Notes

  1. Working distance: distance between the front end of the mechanics and the object. Set this distance within ± 3% of the nominal value for maximum resolution and minimum distortion.
  2. Working f-number (wf/N): the real f-number of a lens in operating conditions.
  3. Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
  4. Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
  5. At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm.
  6. Object side, calculated with the Rayleigh criterion with λ= 520 nm
  7. At max forward current. Tolerance is ± 0.06V on forward voltage measurements.
  8. Used in continuous (not pulsed) mode.
  9. At pulse width <= 10 ms, duty cycle <= 10% condition. Built-in electronics board must be bypassed (see tech info).
  10. Measured from the front end of the mechanics to the camera flange.

Ordering information

It’s easy to select the right lens for your application: our part numbers are coded as TCCXxxx-y, where xxx defines the magnification (050 = 0.50, 066 = 0.66, 075 = 0.75, … ) and y defines the source color (“-G” stands for “green light”, “W” stands for “white light”). For instance, a TCCX050-G features a 0.50 magnification with a green light source.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

Product user guide
Back focal adjustment
LTCLHP manual

Datasheet

Download datasheet

Layout files

PDF
DXF
IGS
STEP
SLDPRT
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
ITA50-GM-10C
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Mono, 1 GigE, POE, C mount
ITA50-GC-10C
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Color, 1 GigE, POE, C mount
ITA50-GM-10C-PL
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Polar Mono, 1 GigE, POE, C mount
ITA50-GC-10C-PL
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Polar Color, 1 GigE, POE, C mount
ITA81-GM-20C
Area scan camera 2856 x 2848 MP, Sony IMX546, CMOS Global shutter, 2/3", Mono, 1 GigE, POE, C mount
ITA81-GC-20C
Area scan camera 2856 x 2848 MP, Sony IMX546, CMOS Global shutter, 2/3", Color, 1 GigE, POE, C mount
CMHO series
CMHO series
Clamping mechanics for lenses
CMHO016
Clamping mechanics for TCxx016 lenses and LTCLHP016-X illuminators
LTSCHP1W-R
Replacement LED module, red
LTSCHP1W-G
Replacement LED module, green
LED1W-G
Replacement LED source, green, 525 nm
CBLT series
CBLT series
Cables for LED illuminators
CB244P1500
Power cable, side 1 M8 connector straight, side 2 cable end - 2 m - type 1 labels
CB244P1500L
Power cable, side 1 M8 connector angled, side 2 cable end - 2 m - type 1 labels
Request a quote
Add this product to the quote request list.