TCCX066-W

Home Optics Telecentric lenses TCCX series

TCCX066-W

Specifications

Downloads

Compatible products

Main optical specifications
Magnification	(x)	0.660
Image circle diameter	(mm)	11.0
Max sensor size		2/3″

Object field of view
1/3”	(mm × mm)	7.27 x 5.45
1/2.5”	(mm × mm)	8.64 x 6.48
1/2”	(mm × mm)	9.70 x 7.27
1/1.8”	(mm × mm)	10.80 x 8.08
2/3”	(mm × mm)	12.88 x 10.74

Advanced optical specifications
Working distance (1)	(mm)	132.3
Working ƒ/N (2)		12
Telecentricity typical (max) (3)	(deg)	< 0.04 (0.06)
Distortion typical (max) (4)	(%)	< 0.1 (0.2)
Depth of field (5)	(mm)	1.40
Resolution (6)	(μm)	12

Lighting specifications
Light color, peak wavelength		white, 6000 K
Spectral FWHM	(nm)	-

Electrical specifications
Supply voltage	(V)	12-24
Max power consumption	(W)	2.5
LED voltage (7)	(V)	2.8 (-)
LED current (8)	(mA)	350
Max pulse current (9)	(mA)	2000
Connector		M8
Cables		CB244P1500 included

Mechanical specifications
Mount		C
Phase adjustment		Yes
Length (10)	(mm)	149.8
Front diameter	(mm)	37.7
Mass	(g)	503

Environmental specifications
Operating temperature	(°C)	0-40
Storage temperature	(°C)	0-50
Operating relative humidity	(%)	20-85, non condensing
Installation		Indoor use only

Eye safety
Risk group according to CEI EN 62471:2010		Risk group 2

Last update 23 Jul 2024

Notes

Working distance: distance between the front end of the mechanics and the object. Set this distance within ± 3% of the nominal value for maximum resolution and minimum distortion.
Working f-number (wf/N): the real f-number of a lens in operating conditions.
Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
At the limits of the depth of field, the image can still be used for measurements. For a very sharp image, however, only half of the depth of field should be applied. Pixel size used for calculation is 3.45 μm.
Object side, calculated with the Rayleigh criterion with λ= 520 nm
At max forward current. Tolerance is ± 0.06V on forward voltage measurements.
Used in continuous (non-pulsed) mode.
At pulse width <= 10 ms, duty cycle <= 10% condition. Built-in electronics board must be bypassed (see tech info).
Measured from the front end of the mechanics to the camera flange.

Ordering information

It’s easy to select the right lens for your application: our part numbers are coded as TCCXxxx-y, where xxx defines the magnification (050 = 0.50, 066 = 0.66, 075 = 0.75, … ) and y defines the source color (“-G” stands for “green light”, “W” stands for “white light”). For instance, a TCCX050-G features a 0.50 magnification with a green light source.

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

Product user guide

pdf

Back focal adjustment

pdf

LTCLHP manual

pdf

Datasheet

Download datasheet

PDF

Layout files

DXF

IGS

PDF

STEP

SLDPRT

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.