Opto Engineering® - 20 years
Home Optics Telecentric lenses TC16M series
TC16M012-K
Specifications
Downloads
Compatible products
Main optical specifications
Magnification (x) 3.000
Image circle diameter (mm) 43.3
Max sensor size 35 mm Full Frame
Object field of view
APS-C IMX342 (mm × mm) 7.45 x 5.59
CHR70M (mm × mm) 10.33 x 7.33
Line 8k-5µm mm 13.60
Full Frame (mm × mm) 12.00 x 8.00
CMV50000 (mm × mm) 12.14 x 9.21
Advanced optical specifications
Working distance (1) (mm) 57.8
Working ƒ/N (2) 18
Telecentricity typical (max) (3) (deg) < 0.03 (0.05)
Distortion typical (max) (4) (%) < 0.03 (0.05)
Depth of field (5) (mm) 0.20
Resolution (6) (μm) 4
Mechanical specifications
Mount (7) M58x0.75 FD 12.96
Phase adjustment (8) No
Length (9) (mm) 412.3
Front diameter (mm) 37.7
Mass (g) 1188

Last update 05 Sep 2023

REACH

Notes

  1. Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion.
  2. Working f-number (wf/N): the real f-number of a lens in operating conditions.
  3. Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
  4. Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
  5. At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 5.5 μm.
  6. Object side, calculated with the Rayleigh criterion with λ= 520 nm
  7. FD stands for Flange Distance (in mm), defined as the distance from the mounting flange (the “metal ring” in rear part of the lens) to the camera detector plane.
  8. Indicates the availability of an integrated camera phase adjustment feature.
  9. Measured from the front end of the mechanics to the camera flange.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

Product user guide
Back focal adjustment

Datasheet

Download datasheet

Layout files

PDF
DXF
IGS
STEP
SLDPRT
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
LTCLHP023-R
Telecentric HP illuminator, beam diameter 16 mm, red, 625 nm
LTCLHP023-G
Telecentric HP illuminator, beam diameter 16 mm, green, 525 nm
LTCLHP023-B
Telecentric HP illuminator, beam diameter 16 mm, blue, 460 nm
LTCLHP023-W
Telecentric HP illuminator, beam diameter 16 mm, white, 6000 K
LTRN023RD
Ring LED illuminator, inner diameter 28.0 mm, straight type, red, 630 nm
LTRN023GR
Ring LED illuminator, inner diameter 28.0 mm, straight type, green, 525 nm
LTRN023BL
Ring LED illuminator, inner diameter 28.0 mm, straight type, blue, 470 nm
LTRN023NW
Ring LED illuminator, inner diameter 28.0 mm, straight type, white, 6300 K
CMHO series
CMHO series
Clamping mechanics for lenses
CMHOTC16M012
Clamping mechanics for TC16M012
PT004-009
Calibration pattern
PT004-009-C
Checkerboard calibration pattern for telecentric lens with certificate
Request a quote
Add this product to the quote request list.