Specifications
Downloads
Compatible products
Lighting specifications | ||
Beam diameter | (mm) | 16 |
Working distance range | (mm) | 45 - 90 |
Light color, peak wavelength (1) | green, 525 nm | |
Spectral FWHM | (nm) | 40 |
Electrical specifications | ||
Supply voltage (2) | (V) | 12-24 |
Max power consumption | (W) | 2.5 |
LED forward voltage typical (max) (3) | (V) | 3.3 (4.0) |
Max LED forward current (4) | (mA) | 350 |
Max pulse current (5) | (mA) | 2000 |
Connector | M8 | |
Cables | CB244P1500 included |
Mechanical specifications | ||
Length (6) | (mm) | 96.8 |
Front diameter | (mm) | 28.0 |
Mass | (g) | 152 |
Environmental specifications | ||
Operating temperature | (°C) | 0-40 |
Storage temperature | (°C) | 0-50 |
Operating relative humidity | (%) | 20-85, non condensing |
Installation | Indoor use only |
Eye safety | ||
Risk group according to CEI EN 62471:2010 | Risk group 1 |
Last update 25 Jul 2024
Notes
- Opto Engineering® recommends green light for high precision measurement applications
- Tolerance ± 10%
- At max forward current. Tolerance is ± 0.06V on forward voltage measurements
- In continuous mode (non-pulsed)
- At pulse width <= 10 ms and duty cycle <= 10%. Built-in electronics board must be bypassed (see tech info)
- Nominal value, with no spacers in place
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
CMHO023
Clamping mechanics for TCxx004, 007, 009, 012 and LTCLHP023-X
LTSCHP1W-G
Replacement LED module, green
LTDV1CH-17V
Strobe controller 1 channel variable current 5 mA - 17A
LTDVE1CH-40F
LED Strobe controller 1 channel, 40A pulsed - 4A continuous, fast version
LTIC1CH-A1-4
Analogue lighting controller unit, 4A, 24V
LTIC1CH-D1-4
Digital lighting controller unit, 4A, 24V
LED1W-G
Replacement LED source, green, 525 nm
CB244P1500
Power cable, side 1 M8 connector straight, side 2 cable end - 2 m - type 1 labels
CB244P1500L
Power cable, side 1 M8 connector angled, side 2 cable end - 2 m - type 1 labels