Specifications
Downloads
Compatible products
Main optical specifications | ||
Magnification | (x) | 0.061 |
Image circle diameter | (mm) | 11.0 |
Max sensor size | 2/3″ |
Object field of view | ||
1/3” (1) | (mm × mm) | 78.69 x 59.02 |
1/2.5” (1) | (mm × mm) | 93.44 x 70.16 |
1/2” (1) | (mm × mm) | 104.92 x 78.69 |
1/1.8” (1) | (mm × mm) | 116.89 x 87.38 |
2/3” (1) | (mm × mm) | 139.34 x 116.23 |
Advanced optical specifications | ||
Working distance (2) | (mm) | 396.0 |
Working ƒ/N (3) | 8 | |
Telecentricity typical (max) (4) | (deg) | < 0.05 (0.08) |
Distortion typical (max) (5) | (%) | < 0.04 (0.08) |
Depth of field (6) | (mm) | 111.30 |
Resolution (7) | (μm) | 83 |
Mechanical specifications | ||
Mount | C | |
Phase adjustment (8) | Yes | |
Length (9) | (mm) | 481.9 |
Front diameter | (mm) | 200 |
Mass | (g) | 5853 |
Last update 02 May 2024
Notes
- Object field of view (mm x mm). For the fields with the indication "Ø =", the image of a circular object of such diameter is fully inscribed into the detector.
- Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion.
- Working f-number (wf/N): the real f-number of a lens in operating conditions.
- Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
- Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
- At the limits of the depth of field, the image can still be used for measurements. For a very sharp image, however, only half of the depth of field should be considered. Pixel size used for calculation is 3.45 μm.
- Object side, calculated with the Rayleigh criterion with λ= 520 nm
- If not available, phase adjustment can be supplied upon request (except for TC23004, TC23007,TC23009, TC23012).
- Measured from the front end of the mechanics to the camera flange.
Ordering information
It's easy to select the right lens for your application: our part numbers are coded as TC xx yyy, where xx defines the camera sensor size (13 = 1/3″, 12 = 1/2″, 23 = 2/3″) and yyy refers to the horizontal field of view (FOV), in millimeters. For instance, a TC12064 features a field of view of 64 (x 48) mm with a 1/2″ camera sensor.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
ITA50-GM-10C
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Mono, 1 GigE, POE, C mount
ITA50-GC-10C
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Color, 1 GigE, POE, C mount
ITA50-GM-10C-PL
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Polar Mono, 1 GigE, POE, C mount
ITA50-GC-10C-PL
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Polar Color, 1 GigE, POE, C mount
ITA81-GM-20C
Area scan camera 2856 x 2848 MP, Sony IMX546, CMOS Global shutter, 2/3", Mono, 1 GigE, POE, C mount
ITA81-GC-20C
Area scan camera 2856 x 2848 MP, Sony IMX546, CMOS Global shutter, 2/3", Color, 1 GigE, POE, C mount
LTCLHP144-R
Telecentric HP illuminator, beam diameter 180 mm, red, 625 nm
LTCLHP144-G
Telecentric HP illuminator, beam diameter 180 mm, green, 525 nm
LTRN144RD
Ring LED illuminator, inner diameter 200.0 mm, straight type, red, 630 nm
LTRN144GR
Ring LED illuminator, inner diameter 200.0 mm, straight type, green, 525 nm
LTRN144BL
Ring LED illuminator, inner diameter 200.0 mm, straight type, blue, 470 nm
LTRN144NW
Ring LED illuminator, inner diameter 200.0 mm, straight type, white, 6300 K
CMHO144
Clamping mechanics for TCxx130, TCxx144 lenses and LTCLHP144-X illuminators
PT120-144
Calibration pattern
PT120-144-C
Checkerboard calibration pattern for telecentric lens with certificate
PT120-144-P
Calibration pattern
FTBP470TC
Optical filter, band pass, blue
FTBP525TC
Optical filter, band pass, green
FTBP635TC
Optical filter, band pass, red
FTBP660TC
Optical filter, band pass, dark red
FTBP850TC
Optical filter, band pass, IR
FTBP880TC
Optical filter, band pass, IR
FTSP450TC
Optical filter, short pass, dark blue
FTSP500TC
Optical filter, short pass, blue
FTSP570TC
Optical filter, short pass, cyan
FTSP700TC
Optical filter, UV+NIR cut off, VIS
FTLP510TC
Optical filter, long pass, yellow
FTLP550TC
Optical filter, long pass, orange
FTLP590TC
Optical filter, long pass, red
FTLP640TC
Optical filter, long pass, dark red
FTLP920TC
Optical filter, long pass, NIR
FTPR032TC
Optical filter, linear polarizing, VIS