Specifications
Downloads
Compatible products
| Lighting specifications | ||
| Beam diameter | (mm) | 300 |
| Working distance range | (mm) | 350 - 700 |
| Light color, peak wavelength (1) | red, 625 nm | |
| Spectral FWHM | (nm) | 20 |
| Electrical specifications | ||
| Supply voltage (2) | (V) | 12-24 |
| Max power consumption | (W) | 2.5 |
| LED forward voltage typical (max) (3) | (V) | 2.4 (3) |
| Max LED forward current (4) | (mA) | 350 |
| Max pulse current (5) | (mA) | 2000 |
| Connector | M8 | |
| Cables | CB244P1500 included | |
| Mechanical specifications | ||
| Length (6) | (mm) | 770.0 |
| Front diameter | (mm) | 322.0 |
| Mass | (g) | 18149 |
| Environmental specifications | ||
| Operating temperature | (°C) | 0-40 |
| Storage temperature | (°C) | 0-50 |
| Operating relative humidity | (%) | 20-85, non condensing |
| Installation | Indoor use only | |
| Eye safety | ||
| Risk group according to CEI EN 62471:2010 | Exempt | |
Last update 03 Aug 2023
Notes
- Opto Engineering® recommends green light for high precision measurement applications
- Tolerance ± 10%
- At max forward current. Tolerance is ± 0.06V on forward voltage measurements
- In continuous mode (not pulsed)
- At pulse width <= 10 ms and duty cycle <= 10%. Built-in electronics board must be bypassed (see tech info)
- Nominal value, with no spacers in place
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
TC12M240-F
High resolution telecentric lens, magnification 0.115x, WD 542.8 mm, F mount
TC12M240-J
High resolution telecentric lens, magnification 0.115x, WD 542.8 mm, M42x1 FD 12 mount
TC1MHR240-C
High resolution telecentric lens for 1/1.2" sensors, magnification 0.045x, C mount
TC3MHR240-C
High resolution telecentric lens for 1.1" sensors, magnification 0.059x, C mount
CPDPH01
Diffuser cap for telecentric illuminators, diffusive diameter 2.8 mm
CMHO240R
Clamping mechanics for TCxx240 lenses and LTCLHP240-X illuminators
LTSCHP1W-R
Replacement LED module, red
LTIC1CH-A1-4
Analogue lighting controller unit, 4A, 24V
LTIC1CH-D1-4
Digital lighting controller unit, 4A, 24V
LED1W-R
Replacement LED source, red, 625 nm
CB244P1500
Power cable, side 1 M8 connector straight, side 2 cable end - 2 m - type 1 labels
CB244P1500L
Power cable, side 1 M8 connector angled, side 2 cable end - 2 m - type 1 labels
Request a quote
Add this product to the quote request list.
Product images
