TCZEL23056

Specifications

Downloads

Compatible products

Main optical specifications
Magnification range	(x)	0.180 0.550
Magnification ratio	(x)	3
Image circle diameter	(mm)	11.0
Max sensor size		2/3″

Object field of view
1/3”	(mm × mm)	26.67 x 20.00 8.73 x 6.55
1/2.5”	(mm × mm)	31.67 x 23.78 10.36 x 7.78
1/2”	(mm × mm)	35.56 x 26.67 11.64 x 8.73
1/1.8”	(mm × mm)	39.61 x 29.61 12.96 x 9.69
2/3”	(mm × mm)	47.22 x 39.39 15.45 x 12.89

Advanced optical specifications
Working distance range (1)	(mm)	115 - 155
Working ƒ/N (2)		9 16
Telecentricity max (3)	(deg)	< 0.3 < 0.3
Distortion max (4)	(%)	< 0.3 < 0.3
Depth of field (5)	(mm)	14.40 2.70
Resolution (6)	(μm)	32 18

Liquid lens specifications
Number of lenses		2
Liquid lens model		Optotune EL-16-40-20D
Temperature sensor		Yes
Focal power mode		Yes
Response time (7)	(ms)	5
Setting time (7)	(ms)	25
Current range	(mA)	-500 to +500
Repeatability using focal power mode	(dpt)	±0.05 (small steps); ±0.1 (large steps)
Lifecycles (10%-90% sinusoidal)		>1,000,000,000
Connector		HR10A-7R-6PB

Mechanical specifications
Mount		C
Phase adjustment (8)		Yes
Length (9)	(mm)	249.3
Front diameter	(mm)	80.0
Mass	(g)	967

Environmental specifications
Operating temperature	(°C)	0-40
Storage temperature	(°C)	0-50
Operating relative humidity	(%)	20-85, non condensing
Installation		Indoor use only

Last update 26 Mar 2024

Notes

Working distance: distance between the front end of the mechanics and the object, reported at nominal range of the liquid lenses; maximum excursion may be larger.
Working f-number (wf/N): the real f-number of a lens in operating conditions.
Maximum angle between chief rays and optical axis on the object side.
Percent deviation of the real image compared to an ideal, undistorted image.
At the borders of the field depth the image can be still used for measurement but, to get a perfectly sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm.
Object side, calculated with the Rayleigh criterion with λ= 520 nm
Typical at 30°C, 0 to ±250 mA step.
Indicates the availability of an integrated camera phase adjustment feature.
Measured from the front end of the mechanics to the camera flange.

Additional notes

Performances guaranteed when used with vertical optical axis; when used with horizontal optical axis performances drop due to gravity induced aberrations of the liquid lens.

Ordering information

Hirose cables and liquid lens controller sold separately.

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.