LTPRHP3W-B

LED pattern projector 3W, HP, blue

Specifications

Optical specifications
Light color, peak wavelength		blue, 460 nm
Spectral FWHM	(nm)	20
Illuminance	(klux)	3
Device power ratings
Minimum DC Voltage	(V)	12
Maximum DC voltage	(V)	24
Power consumption	(W)	< 4.5
Max Forward current (1)	(mA)	720
Cable		CB244P1500 included
LED power ratings
Forward voltage (typical) (2, 3)	(V)	3.3
Forward voltage (max) (2, 3)	(V)	4.00
Max pulse current (4)	(mA)	2000
Mechanical specifications
Mass	(g)	119
Eye safety
Risk group according to CEI EN 62471:2010		Risk group 2

Notes

Tolerance ±10%
Used in continuous (not pulsed) mode.
At max forward current.
Tolerance is ±0.06V on forward voltage measurements.
At pulse width <= 10 ms, duty cycle <= 10% condition. Built-in electronics board must be bypassed (see tech info online).

Connection

Device side - male pins
Front view

Pinout reference

Pin: Function

1: Earth
2: GND
3: LED Anode
4: Power supply (+12÷24 V)

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

PDF DXF IGS STEP

Compatible products

TCLWD series telecentric lens featuring longer working distance

TCLWD050	Long working distance telecentric lens for 2/3″ detectors, WD 132.3 mm, magnification 0.50x, C-mount
TCLWD066	Long working distance telecentric lens for 2/3″ detectors, WD 132.3 mm, magnification 0.66x, C-mount
TCLWD075	Long working distance telecentric lens for 2/3″ detectors, WD 132.3 mm, magnification 0.75x, C-mount
TCLWD100	Long working distance telecentric lens for 2/3″ detectors, WD 132.3 mm, magnification 1.00x, C-mount
TCLWD150	Long working distance telecentric lens for 2/3″ detectors, WD 132.3 mm, magnification 1.50x, C-mount
TCLWD250	Long working distance telecentric lens for 2/3″ detectors, WD 132.3 mm, magnification 2.50x, C-mount
TCLWD350	Long working distance telecentric lens for 2/3″ detectors, WD 132.3 mm, magnification 3.50x, C-mount

LTDV1CH‑17V

Strobe controller 1 channel variable current 5 mA - 17A

PT00000100P	Line pattern, photolitography
PT00000100L	Line pattern, laser engraved
PT00000200P	Cross pattern
PT00000200L	Cross pattern
PT00000300P	Stripe pattern
PT00000300L	Stripe pattern
PT00000400P	Grid pattern
PT00000400L	Grid pattern
PT00000500P	Edge pattern
PT00000500L	Edge pattern
PTST050450P	Stripe pattern
PTST050200P	Stripe pattern
PTST050100P	Stripe pattern
PTST050050P	Stripe pattern
PTST010010P	Stripe pattern
PTST020020P	Stripe pattern
PTGR050450P	Grid pattern
PTGR050200P	Grid pattern
PTGR050100P	Grid pattern
PTGR050050P	Grid pattern
PTCD010P	Cloud of dots pattern, density 10.5%
PTCD020P	Cloud of dots pattern, density 20%
PTCD035P	Cloud of dots pattern, density 35%

CB244P1500	Power cable, side 1 M8 connector straight, side 2 cable end - 2 m - type 1 labels
CB244P1500L	Power cable, side 1 M8 connector angled, side 2 cable end - 2 m - type 1 labels

Design & development by Opto Engineering → SEO and consulting by Dipiemme Studio