Opto Engineering® - 20 years Opto Engineering® - 20 years Opto Engineering. Our first 20 years →
Opto Engineering® - 20 years
Home Optics Telecentric lenses TC4MHR series
TC4MHRP024-J

Specifications

Main optical specifications
Magnification (x) 0.699
Image circle diameter (mm) 22.0
Max sensor size 4/3″
Object field of view
1" (mm × mm) 20.30 x 10.74
1.1″ (mm × mm) 20.26 x 14.84
4/3″ (1) (mm × mm) 27.08 x 15.18
Advanced optical specifications
Working distance (2) (mm) 67.2
Working ƒ/N (3) 11
Telecentricity typical (max) (4) (deg) <0.07 (0.10)
Distortion typical (max) (5) (%) <0.05 (0.10)
Field depth (6) (mm) 1.20
Resolution (7) (μm) 10
Mechanical specifications
Mount M42x1 FD 12
Phase adjustment (8) Yes
Length (9) (mm) 199.9
Front diameter (mm) 44
Mass (g) 541

Last update 29 Sep 2022

REACH

Notes

  1. With IMX387 (21.7 mm diagonal) sensors, the FOV may show some vignetting at the image corners.
  2. Working distance: distance between the front end of the mechanics and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion.
  3. Working f-number (wf/N): the real f-number of a lens in operating conditions.
  4. Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
  5. Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
  6. At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm.
  7. Object side, calculated with the Rayleigh criterion with λ= 520 nm
  8. Indicates the availability of an integrated camera phase adjustment feature.
  9. Measured from the front end of the mechanics to the camera flange.

Ordering information

It's easy to select the right lens for your application: our models are coded as TC4MHRyyy-x where yyy refers to the width of the object FOV in mm and -x refers to the mount option:
-C for C-mount
-F for F-mount
-E for M42X1 mount (flange distance FD 16 mm).
For example, TC4MHR064-F for a F-mount TC4MHR064 lens.
Customized mounts are also available upon request.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Required field
Required field
Required field
Required field
Required field
Required field
Required field
Required field
Minimun length: 6 characters
Required field
Required field