Opto Engineering® - 20 years Opto Engineering® - 20 years Opto Engineering. Our first 20 years →
Opto Engineering® - 20 years
Home Optics Telecentric lenses TC12M series
TC12M240-F

Specifications

Main optical specifications
Magnification (x) 0.115
Image circle diameter (mm) 33.5
Max sensor size APS-H
Object field of view
PYTHON 16K (mm × mm) 160.28 x 160.28
APS-C IMX342 (mm × mm) 194.43 x 145.83
Line 4k-7µm (mm) 249.30
APS-H PYTHON 25K (mm × mm) 200.35 x 200.35
Advanced optical specifications
Working distance (1) (mm) 542.8
Working ƒ/N (2) 8
Telecentricity typical (max) (3) (deg) <0.08 (0.10)
Distortion typical (max) (4) (%) <0.08 (0.10)
Field depth (5) (mm) 49.90
Resolution (6) (μm) 44
Mechanical specifications
Mount (7) F
Phase adjustment (8) Yes
Length (9) (mm) 849.8
Front diameter (mm) 322
Mass (g) 18564

Last update 11 Apr 2022

REACH

Notes

  1. Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion.
  2. Working f-number (wf/N): the real f-number of a lens in operating conditions.
  3. Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
  4. Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
  5. At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 5.5 μm.
  6. Object side, calculated with the Rayleigh criterion with λ= 520 nm
  7. FD stands for Flange Distance (in mm), defined as the distance from the mounting flange (the “metal ring” in rear part of the lens) to the camera detector plane.
  8. Indicates the availability of an integrated camera phase adjustment feature.
  9. Measured from the front end of the mechanics to the camera flange.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Required field
Required field
Required field
Required field
Required field
Required field
Required field
Required field
Minimun length: 6 characters
Required field
Required field

Compatible products

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
LTCLHP240-R
Telecentric HP illuminator, beam diameter 300 mm, red, 625 nm
LTCLHP240-G
Telecentric HP illuminator, beam diameter 300 mm, green, 525 nm
CMHO series
CMHO series
Clamping mechanics for lenses
CMHO240R
Clamping mechanics for TCxx240 lenses and LTCLHP240-X illuminators