Specifications
Downloads
Compatible products
| Lighting specifications | ||
| Illumination area diameter | (mm) | 100 |
| Optimal working distance | (mm) | 5-50 |
| Number of LEDs | 80 | |
| Light color, peak wavelength | green, 528 nm | |
| Spectral FWHM | (nm) | 35 |
| Illuminance (1) | (klux) | 125 |
| Electrical specifications | ||
| Power supply mode | Strobe only, constant current driving | |
| Peak power consumption | (W) | n.a. |
| Min pulse current | (A) | 3.5 |
| Max pulse current | (A) | 17.0 |
| Max pulse duration (2) | (ms) | 1 |
| Max duty-cycle | (%) | 1.5 |
| Estimated MTBF (3) | (hours) | > 50000 |
| Connector | M12 | |
| Cables | CBLT001 included | |
| Mechanical specifications | ||
| Aperture diameter | (mm) | 10-60 |
| Length | (mm) | 206.0 |
| Width | (mm) | 206.0 |
| Height | (mm) | 128.0 |
| Mass | (g) | 2200 |
| Clamping system | 4x M6 threaded holes | |
| Environmental specifications | ||
| Operating temperature | (°C) | 0-40 |
| Storage temperature | (°C) | 0-50 |
| Operating relative humidity | (%) | 20-85, non condensing |
| Installation | Indoor use only | |
| Eye safety | ||
| Risk group according to CEI EN 62471:2010 | Exempt | |
Last update 04 Sep 2023
Notes
- Measured at maximum current and maximum working distance.
- At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz.
- At 25°C.
Ordering information
Our part numbers are coded as LTDMxy-z, where x defines the illuminator size (A = small, B = medium, C = large), y refers to the power intensity (1 = medium, 2 = high) and z refers to color (W = white, R = red, G = green).
For instance LTDMB2-R is a diffusive strobed dome illuminator - medium size high power red.
For instance LTDMB2-R is a diffusive strobed dome illuminator - medium size high power red.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
LTDV1CH-17V
Strobe controller 1 channel variable current 5 mA - 17A
LTDVE1CH-40F
LED Strobe controller 1 channel, 40A pulsed - 4A continuous, fast version
LTDVE2CH-20F
LED Strobe controller 2 channels, 20A/40A pulsed - 3A/6A continuous, fast version
LTDVE4CH-20
LED Strobe controller 4 channels, 20A pulsed - 2A continuous
LTDV6CH
Strobe controller 6 channels
LTDVE8CH-20
LED Strobe controller 8 channels, 20A pulsed - 2A continuous
Request a quote
Add this product to the quote request list.
Product images
