Opto Engineering® - 20 years
Home Lighting LTBP series
LTBP288180-G
Specifications
Downloads
Compatible products
Lighting specifications
Modules 6x5
Illumination area width (mm) 288
Illumination area height (mm) 180
Number of LEDs 1440
Light color, peak wavelength green, 525 nm
Spectral FWHM (nm) 33
Illuminance (1) (klux) n.a.
Diffuser yes
Collimation film no
Electrical specifications
Power supply mode Strobe only, constant current driving
Peak power consumption (W) 504.0
Max pulse current (2) (A) 12.6 + 12.6
Typical pulse voltage (V) 28.8
Max pulse duration (ms) 1
Max duty-cycle (%) 1.5
Max continuous current (mA) 150
Estimated MTBF (3) (hours) > 50000
Connector M12
Cables CBLT005 included
Mechanical specifications
Length (mm) 300
Width (mm) 200
Height (mm) 26
Mass (g) 1905
Clamping system 8x M6 threaded holes
Environmental specifications
Operating temperature (°C) 0-40
Storage temperature (°C) 0-50
Operating relative humidity (%) 20-85, non condensing
IP rating IP40
Installation Indoor use only
Eye safety
Risk group according to CEI EN 62471:2010 Exempt

Last update 16 Sep 2024

CE
ROHS
REACH
WEEE
UKCA

Notes

  1. Minimum value, at max driving current, on emitting surface. Where n.a. is reported data is available upon request.
  2. Models where two currents are listed (such as LTBP240180-R) feature two separate channels.
  3. At 25°C.

Ordering information

Our part numbers are coded as LTBP xxx yyy - z - a, where:
- xxx defines the illumination area length (in mm),
- yyy defines the illumination area width (in mm),
- z defines the color. R = red, G = green, B = blue, W = white, IR860 = Infrared 860 nm,
- a defines the presence of an optional optical sheet. CO = with collimation films in both horizontal and vertical directions. Leave empty if no optional optical sheet is required. For additional options such as horizontal/vertical linear or circular polarizers, contact us.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

Product user guide
Wiring for Opto Engineering high power LED lights

Datasheet

Download datasheet

Layout files

DXF
IGS
PDF
STEP
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
LTDV series
LTDV series
LED lighting strobe controllers
LTDVE2CH-20F
LED Strobe controller 2 channels, 20A/40A pulsed - 3A/6A continuous, fast version
LTDVE4CH-20
LED Strobe controller 4 channels, 20A pulsed - 2A continuous
LTDV6CH
Strobe controller 6 channels
LTDVE8CH-20
LED Strobe controller 8 channels, 20A pulsed - 2A continuous
CBLT series
CBLT series
Cables for LED illuminators
CBLT003
Illumination cable PVC black, side 1 M8 connector straight, side 2 cable end - 5 m - for single stage systems
CBLT004
Illumination cable PVC black, side 1 M8 connector right angled, side 2 cable end - 5 m - for single stage systems
CBLT005
Illumination cable PVC grey, side 1 M12 connector straight, side 2 cable end - 5 m - for double stage systems
CBLT006
Illumination cable PVC grey, side 1 M12 connector right angled, side 2 cable end - 5 m - for double stage systems
Request a quote
Add this product to the quote request list.