Opto Engineering® - 20 years
Home Lighting LED illuminators LTBP series
Compatible products
Lighting specifications
Modules 5x1
Illumination area width (mm) 240
Illumination area height (mm) 36
Number of LEDs 240
Light color, peak wavelength IR, 850 nm
Spectral FWHM (nm) 30
Illuminance (1) (klux) -
Diffuser yes
Collimation film no
Electrical specifications
Power supply mode Strobe only, constant current driving
Peak power consumption (W) 187.2
Max pulse current (2) (A) 9.0
Typical pulse voltage (V) 20.8
Max pulse duration (ms) 1
Max duty-cycle (%) 1.5
Max continuous current (mA) 25
Estimated MTBF (3) (hours) > 50000
Connector M8
Cables CBLT003 included
Mechanical specifications
Length (mm) 252
Width (mm) 56
Height (mm) 26
Mass (g) 480
Clamping system 8x M6 threaded holes
Environmental specifications
Operating temperature (°C) 0-40
Storage temperature (°C) 0-50
Operating relative humidity (%) 20-85, non condensing
IP rating IP40
Installation Indoor use only
Eye safety
Risk group according to CEI EN 62471:2010 Exempt

Last update 03 Aug 2023



  1. Minimum value, at max driving current, on emitting surface. Where n.a. is reported data is available upon request.
  2. Models where two currents are listed (such as LTBP240180-R) feature two separate channels.
  3. At 25°C.

Ordering information

Our part numbers are coded as LT2BC xxx yyy - z - a, where:
- xxx defines the illumination area length (in mm),
- yyy defines the illumination area width (in mm),
- z defines the color. R = red, G = green, B = blue, W = white, IR860 = Infrared 860 nm,
- a defines the presence of an optional optical sheet. CO = with collimation films in both horizontal and vertical directions. Leave empty if no optional optical sheet is required. For additional options such as horizontal/vertical linear or circular polarizers, contact us.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

Product user guide
Wiring for Opto Engineering high power LED lights


Download datasheet

Layout files

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
LTDV series
LTDV series
LED lighting strobe controllers
Strobe controller 1 channel variable current 5 mA - 17A
LED Strobe controller 1 channel, 40A pulsed - 4A continuous, fast version
LED Strobe controller 2 channels, 20A/40A pulsed - 3A/6A continuous, fast version
LED Strobe controller 4 channels, 20A pulsed - 2A continuous
Strobe controller 6 channels
LED Strobe controller 8 channels, 20A pulsed - 2A continuous
CBLT series
CBLT series
Cables for LED illuminators
Illumination cable PVC black, side 1 M8 connector straight, side 2 cable end - 5 m - for single stage systems
Illumination cable PVC black, side 1 M8 connector right angled, side 2 cable end - 5 m - for single stage systems
Request a quote
Add this product to the quote request list.