Specifications
Downloads
Compatible products
Lighting specifications | ||
Modules | 2x6 | |
Illumination area width | (mm) | 96 |
Illumination area height | (mm) | 216 |
Number of LEDs | 576 | |
Light color, peak wavelength | white, > 4500 K | |
Spectral FWHM | (nm) | - |
Illuminance (1) | (klux) | n.a. |
Diffuser | yes | |
Collimation film | no |
Electrical specifications | ||
Power supply mode | Strobe only, constant current driving | |
Peak power consumption | (W) | 148.5 |
Max pulse current (2) | (A) | 5.8 |
Typical pulse voltage | (V) | 25.6 |
Max pulse duration | (ms) | 1 |
Max duty-cycle | (%) | 1.5 |
Max continuous current | (mA) | 60 |
Estimated MTBF (3) | (hours) | > 50000 |
Connector | M8 | |
Cables | CBLT003 included |
Mechanical specifications | ||
Length | (mm) | 108 |
Width | (mm) | 236 |
Height | (mm) | 26 |
Mass | (g) | 1463 |
Clamping system | 4x M6 threaded holes |
Environmental specifications | ||
Operating temperature | (°C) | 0-40 |
Storage temperature | (°C) | 0-50 |
Operating relative humidity | (%) | 20-85, non condensing |
IP rating | IP40 | |
Installation | Indoor use only |
Eye safety | ||
Risk group according to CEI EN 62471:2010 | Exempt |
Last update 16 Sep 2024
Notes
- Minimum value, at max driving current, on emitting surface. Where n.a. is reported data is available upon request.
- Models where two currents are listed (such as LTBP240180-R) feature two separate channels.
- At 25°C.
Ordering information
Our part numbers are coded as LTBP xxx yyy - z - a, where:
- xxx defines the illumination area length (in mm),
- yyy defines the illumination area width (in mm),
- z defines the color. R = red, G = green, B = blue, W = white, IR860 = Infrared 860 nm,
- a defines the presence of an optional optical sheet. CO = with collimation films in both horizontal and vertical directions. Leave empty if no optional optical sheet is required. For additional options such as horizontal/vertical linear or circular polarizers, contact us.
- xxx defines the illumination area length (in mm),
- yyy defines the illumination area width (in mm),
- z defines the color. R = red, G = green, B = blue, W = white, IR860 = Infrared 860 nm,
- a defines the presence of an optional optical sheet. CO = with collimation films in both horizontal and vertical directions. Leave empty if no optional optical sheet is required. For additional options such as horizontal/vertical linear or circular polarizers, contact us.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
LTDV1CH-17V
Strobe controller 1 channel variable current 5 mA - 17A
LTDVE1CH-40F
LED Strobe controller 1 channel, 40A pulsed - 4A continuous, fast version
LTDVE2CH-20F
LED Strobe controller 2 channels, 20A/40A pulsed - 3A/6A continuous, fast version
LTDVE4CH-20
LED Strobe controller 4 channels, 20A pulsed - 2A continuous
LTDV6CH
Strobe controller 6 channels
LTDVE8CH-20
LED Strobe controller 8 channels, 20A pulsed - 2A continuous