Opto Engineering® - 20 years
Home Lighting LED illuminators LT2BC series
Compatible products
Lighting specifications
Modules 3x5
Illumination area width (mm) 144
Illumination area height (mm) 180
Number of LEDs 720
Light color, peak wavelength green, 525 nm
Spectral FWHM (nm) 33
Illuminance (1) (klux) 19
Irradiance (1) (W/m2) -
Diffuser yes
Collimation film yes
Electrical specifications
Supply voltage (V) 24
Current (2) (mA) 1160
Power consumption (2) (W) 27.8
Typical pulse voltage (V) 32.3
Max pulse current (3) (mA) 2500
Peak power consumption (W) 80.8
Max duty-cycle (%) 1.5
Max pulse duration (ms) 1
Connector M8
Cables CBLT003 included
Mechanical specifications
Length (mm) 156
Width (mm) 200
Height (mm) 26
Mass (g) 1400
Clamping system 4x M6 threaded holes
Environmental specifications
Operating temperature (°C) 0-40
Storage temperature (°C) 0-50
Operating relative humidity (%) 20-85, non condensing
IP rating IP40
Installation Indoor use only
Eye safety
Risk group according to CEI EN 62471:2010 Exempt

Last update 02 Aug 2023



  1. At emitting surface.
  2. Tolerance ± 10%
  3. At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz.

Ordering information

Our part numbers are coded as LT2BC xxx yyy - z - a, where:
- xxx defines the illumination area length (in mm),
- yyy defines the illumination area width (in mm),
- z defines the color. R = red, G = green, B = blue, W = white, IR860 = Infrared 860 nm,
- a defines the presence of an optional optical sheet. CO = with collimation films in both horizontal and vertical directions. Leave empty if no optional optical sheet is required. For additional options such as horizontal/vertical linear or circular polarizers, contact us.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

Product user guide


Download datasheet
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
LTDV series
LTDV series
LED lighting strobe controllers
Strobe controller 1 channel variable current 5 mA - 17A
LED Strobe controller 2 channels, 20A/40A pulsed - 3A/6A continuous, fast version
LED Strobe controller 4 channels, 20A pulsed - 2A continuous
LED Strobe controller 8 channels, 20A pulsed - 2A continuous
LTIC series
LTIC series
LED lighting controllers
Analogue lighting controller unit, 4A, 24V
Digital lighting controller unit, 4A, 24V
Analogue lighting controller unit, 1 channel, 24V, 2A, constant mode, power adaptor 24V plug
CB series
CB series
Illumination cable PVC black, side 1 M8 connector straight, side 2 cable end - 5 m - for single stage systems
Illumination cable PVC black, side 1 M8 connector right angled, side 2 cable end - 5 m - for single stage systems
Request a quote
Add this product to the quote request list.