Specifications
Downloads
Compatible products
| Lighting specifications | ||
| Modules | 3x2 | |
| Illumination area width | (mm) | 144 |
| Illumination area height | (mm) | 72 |
| Number of LEDs | 288 | |
| Light color, peak wavelength | red, 620 nm | |
| Spectral FWHM | (nm) | 20 |
| Illuminance (1) | (klux) | 14 |
| Irradiance (1) | (W/m2) | - |
| Diffuser | yes | |
| Collimation film | yes | |
| Electrical specifications | ||
| Supply voltage (2) | (V) | 24 |
| Current (2) | (mA) | 640 |
| Power consumption (2) | (W) | 15.4 |
| Typical pulse voltage | (V) | 35.5 |
| Max pulse current (3) | (mA) | 1400 |
| Peak power consumption | (W) | 49.7 |
| Max duty-cycle | (%) | 1.5 |
| Max pulse duration | (ms) | 1 |
| Connector | M8 | |
| Cables | CBLT003 included | |
| Mechanical specifications | ||
| Length | (mm) | 156 |
| Width | (mm) | 92 |
| Height | (mm) | 26 |
| Mass | (g) | 626 |
| Clamping system | 4x M6 threaded holes | |
| Environmental specifications | ||
| Operating temperature | (°C) | 0-40 |
| Storage temperature | (°C) | 0-50 |
| Operating relative humidity | (%) | 20-85, non condensing |
| IP rating | IP40 | |
| Installation | Indoor use only | |
| Eye safety | ||
| Risk group according to CEI EN 62471:2010 | Exempt | |
Last update 26 Jun 2024
Notes
- At emitting surface.
- Tolerance ± 10%
- At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz.
Ordering information
Our part numbers are coded as LT2BC xxx yyy - z - a, where:
- xxx defines the illumination area length (in mm),
- yyy defines the illumination area width (in mm),
- z defines the color. R = red, G = green, B = blue, W = white, IR860 = Infrared 860 nm,
- a defines the presence of an optional optical sheet. CO = with collimation films in both horizontal and vertical directions. Leave empty if no optional optical sheet is required. For additional options such as horizontal/vertical linear or circular polarizers, contact us.
- xxx defines the illumination area length (in mm),
- yyy defines the illumination area width (in mm),
- z defines the color. R = red, G = green, B = blue, W = white, IR860 = Infrared 860 nm,
- a defines the presence of an optional optical sheet. CO = with collimation films in both horizontal and vertical directions. Leave empty if no optional optical sheet is required. For additional options such as horizontal/vertical linear or circular polarizers, contact us.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
LTDV1CH-17V
Strobe controller 1 channel variable current 5 mA - 17A
LTDVE1CH-40F
LED Strobe controller 1 channel, 40A pulsed - 4A continuous, fast version
LTDVE2CH-20F
LED Strobe controller 2 channels, 20A/40A pulsed - 3A/6A continuous, fast version
LTDVE4CH-20
LED Strobe controller 4 channels, 20A pulsed - 2A continuous
LTDV6CH
Strobe controller 6 channels
LTDVE8CH-20
LED Strobe controller 8 channels, 20A pulsed - 2A continuous
LTIC1CH-A1-4
Analogue lighting controller unit, 4A, 24V
LTIC1CH-D1-4
Digital lighting controller unit, 4A, 24V
LTICGR1000-D1
Analogue lighting controller unit, 1 channel, 24V, 2A, constant mode, power adaptor 24V plug
LTICGR1000-D1-PS-UK
Analogue lighting controller unit, 1 channel, 24V, 2A, constant mode, UK power cord, power adaptor 24V plug
LTICGR1000-D1-PS-US
Analogue lighting controller unit, 1 channel, 24V, 2A, constant mode, US power cord, power adaptor 24V plug
LTICGR1000-D1-PS-EU
Analogue lighting controller unit, 1 channel, 24V, 2A, constant mode, EU power cord, power adaptor 24V plug
LTICGR1000-D1-PS-UK-TB
Analogue lighting controller unit, 1 channel, 24V, 2A, constant mode, UK power cord, power adaptor 24V plug, Illumination cable, side A SM 3 way male connector, side B terminal blocks connector, 24V - 3m
LTICGR1000-D1-PS-US-TB
Analogue lighting controller unit, 1 channel, 24V, 2A, constant mode, US power cord, power adaptor 24V plug, Illumination cable, side A SM 3 way male connector, side B terminal blocks connector, 24V - 3m
LTICGR1000-D1-PS-EU-TB
Analogue lighting controller unit, 1 channel, 24V, 2A, constant mode, EU power cord, power adaptor 24V plug, Illumination cable, side A SM 3 way male connector, side B terminal blocks connector, 24V - 3m
Request a quote
Add this product to the quote request list.
Product images
