Specifications
Downloads
Compatible products
Tech notes
| Main optical specifications | ||
| Focal length | (mm) | 25 |
| Magnification (1) | (x) | 0.116 |
| Image circle diameter | (mm) | 11.0 |
| Max sensor size | 2/3″ | |
| Angle of view | ||
| 1/3” | (deg) | 13.2 |
| 1/1.8” | (deg) | 19.5 |
| 2/3” | (deg) | 24.0 |
| Object field of view | ||
| 1/3” (1) | 41.38 x 31.03 | |
| 1/1.8" (1) | 61.47 x 45.95 | |
| 2/3” (1) | 73.28 x 61.12 | |
| Advanced optical specifications | ||
| Working distance range (2) | (mm) | 200 - inf |
| ƒ/N | 5.6 | |
| Back focal length | (mm) | 10.3 |
| Distortion (3) | (%) | < 0.2 |
| Liquid lens specifications | ||
| Liquid lens model | Optotune EL-3-10 | |
| Temperature sensor | Yes | |
| Focal power mode | Yes | |
| Response time (4) | (ms) | 1 |
| Setting time (4) | (ms) | 4 |
| Current range | (mA) | -120 to +120 |
| Lifecycles (10%-90% sinusoidal) | >1,000,000,000 | |
| Connector | HR10A-7R-6PB | |
| Mechanical specifications | ||
| Mount | C | |
| Phase adjustment | Yes | |
| Filter thread | M27 x 0.5 | |
| Front diameter | (mm) | 30.0 |
| Length (5) | (mm) | 21.0 |
| Mass | (g) | 48 |
| Environmental specifications | ||
| Operating temperature | (°C) | 0-40 |
| Storage temperature | (°C) | 0-50 |
| Operating relative humidity | (%) | 20-85, non condensing |
| Installation | Indoor use only | |
Last update 14 Feb 2024
Notes
- Calculated at minimum object distance.
- Working distance: distance between the front end of the mechanics and the object.
- Percent deviation of the real image compared to an ideal, undistorted image.
- Typical at 30°C, 0 to ±250 mA step.
- Measured from the front end of the mechanics to the camera flange.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
ITA50-GM-10C-EL
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
ITA50-GC-10C-EL
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
ITA81-GM-20C-EL
Area scan camera 2856 x 2848 MP, Sony IMX546, CMOS Global shutter, 2/3", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
ITA81-GC-20C-EL
Area scan camera 2856 x 2848 MP, Sony IMX546, CMOS Global shutter, 2/3", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
FTBP470M27
Optical filter, band pass, blue
FTBP525M27
Optical filter, band pass, green
FTBP635M27
Optical filter, band pass, red
FTBP660M27
Optical filter, band pass, dark red
FTBP850M27
Optical filter, band pass, IR
FTSP450M27
Optical filter, short pass, dark blue
FTSP500M27
Optical filter, short pass, blue
FTSP570M27
Optical filter, short pass, cyan
FTSP700M27
Optical filter, UV+NIR cut off, VIS
FTLP510M27
Optical filter, long pass, yellow
FTLP550M27
Optical filter, long pass, orange
FTLP590M27
Optical filter, long pass, red
FTLP640M27
Optical filter, long pass, dark red
CBGPIO6PMF-3M
6 Pin Hirose Male - Female moulded connector cable, 3 m
CBGPEL12P6P-03M
I/O cable, side 1 HIROSE 12 pin, side 2 HIROSE 6 pin, 0.3 m
CBGPIO12PY6P-3M
I/O cable, side 1 HIROSE 12 pin, side 2 HIROSE 6 pin, side 3 cable end, 3m+0.3m
Tech notes
Liquid Lens
Request a quote
Add this product to the quote request list.
Product images
