TCCX100-W

Coaxial telecentric lens for 2/3″ detectors, WD 132.3 mm, magnification 1.00x, white

Specifications

Magnification	(x)	1.000
Image circle Ø	(mm)	11
Phase adjustment		Yes
Object field of view (8)
with 1/3″ detector (4.8 x 3.6 mm)	(mm x mm)	4.80 x 3.60
with 1/2.5″ detector (5.70 x 4.28 mm)	(mm x mm)	5.70 x 4.28
with 1/2″ detector (6.4 x 4.8 mm)	(mm x mm)	6.40 x 4.80
with 1/1.8″ detector (7.13 x 5.37 mm) (7)	(mm x mm)	7.13 x 5.37
with 2/3″ - 5 MP detector (8.45 x 7.07 mm)	(mm x mm)	8.50 x 7.09
Optical specifications
Working distance (1)	(mm)	132.3
wF/# (2)		12
Telecentricity typical (max) (3)	(deg)	0.04 (0.06)
Distortion typical (max) (4)	(%)	0.05 (0.10)
Field depth (5)	(mm)	1
CTF @ 35 lp/mm	(%)	> 60
Electrical specifications
Light color, peak wavelength	(mm)	white
Device power ratings
DC voltage minimum	(V)	12
DC voltage maximum	(V)	24
Power consumption	(W)	< 2.5
Max LED forward current 7	(mA)	350
LED power ratings
Forward voltage (typical) 8	(V)	2.78
Forward voltage (max) 8	(V)	-
Max pulse current 9	(mA)	2000
Dimensions
Mount		C
Length (6)	(mm)	132.9
Diameter	(mm)	37.7
Mass	(g)	485
Eye safety
Risk group according to CEI EN 62471:2010		Risk group 1

Notes

Working distance: distance between the front end of the mechanics and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion.
Working F/#: the real F/# of a lens when used as a macro. Lenses with smaller apertures can be supplied on request.
Maximum slope of chief rays inside the lens: when converted to milliradians, it gives the maximum measurement error for any millimeter of object displacement. Typical (average production) values and maximum (guaranteed) values are listed.
Percent deviation of the real image compared to an ideal, undistorted image: typical (average production) values and maximum (guaranteed) values are listed.
At the borders of the field depth the image can be still used for measurement but, to get a perfectly sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 5.5 μm.
Measured from the front end of the mechanics to the camera flange.

Used in continuous (not pulsed) mode.
At max forward current. Tolerance is ±0.06V on forward voltage measurements.
At pulse width <= 10 ms, duty cycle <= 10% condition. Built-in electronics board must be bypassed (see tech info).

Connection

Device side - male pins
Front view

Pinout reference

Pin: Function

1: Earth
2: GND
3: LED Anode
4: Power supply (+12÷24 V)

Dimensions

Dimensional layout

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

PDF DXF IGS STEP

Request a quote

Simply fill in the form below to receive a quote or to request further info about this product: a sales engineer will get back to you within 24 hours.

* Please note: all fields are required.

First name

Last name

Job description

Company

Address

City

ZIP code

Phone

Country

State (US)

Your message

Copy the Opto Security Number below
(4 characters)

* After submit we'll ask you to check your consense to use Your data

E-mail

Please, insert a valid E-mail and accept conditions.

: With this you authorize the treatment of your personal data and give us a consense to contact you in order to work on your commercial requests and to be able to send you our best offers to cover your needs. For more details, please, read here(MANDATORY)
: With this you authorize the treatment of your personal data and give us a consense to contact you and send you email newsletters about products, sales, events, company announcements and to be able to send you our best offers to cover your needs. Newsletter are sent (roughly) twice a month. We will NOT spam or abuse your email in any way. For more details, please, read here(OPTIONAL)
: With this you authorize the treatment of your personal data and give us a consense to contact you and send you our product catalog by traditional mail (every two years). For more details, please, read here(OPTIONAL)

Compatible products

RT‑IDS4‑00‑150‑2‑W‑24V‑FL	Continuous LED dome, 185 mm outer diameter, white, RT-EXT-24V-F-3M 3 meters cable included.
RT‑IDS4‑00‑150‑2‑R‑24V‑FL	Continuous LED dome, 185 mm outer diameter, red, RT-EXT-24V-F-3M 3 meters cable included.
RT‑IDS4‑00‑150‑2‑G‑24V‑FL	Continuous LED dome, 185 mm outer diameter, green, RT-EXT-24V-F-3M 3 meters cable included.
RT‑IDS4‑00‑150‑2‑B‑24V‑FL	Continuous LED dome, 185 mm outer diameter, blue, RT-EXT-24V-F-3M 3 meters cable included.

RT‑DLR2‑60‑070‑2‑W‑24V‑FL	Continuous LED low angle diffused ringlight, inner diameter 43 mm, 60°, white, RT-EXT-24V-F-3M 3 meters cable included.
RT‑DLR2‑60‑070‑2‑R‑24V‑FL	Continuous LED low angle diffused ringlight, inner diameter 43 mm, 60°, red, RT-EXT-24V-F-3M 3 meters cable included.
RT‑DLR2‑60‑070‑2‑G‑24V‑FL	Continuous LED low angle diffused ringlight, inner diameter 43 mm, 60°, green, RT-EXT-24V-F-3M 3 meters cable included.
RT‑DLR2‑60‑070‑2‑B‑24V‑FL	Continuous LED low angle diffused ringlight, inner diameter 43 mm, 60°, blue, RT-EXT-24V-F-3M 3 meters cable included.

RT‑LLA‑75‑130‑3‑W‑24V‑FL	Continuous LED low angle direct ringlights, inner diameter 94 mm, 75°, white, RT-EXT-24V-F-3M 3 meters cable included.
RT‑LLA‑75‑130‑3‑R‑24V‑FL	Continuous LED low angle direct ringlights, inner diameter 94 mm, 75°, red, RT-EXT-24V-F-3M 3 meters cable included.
RT‑LLA‑75‑130‑3‑G‑24V‑FL	Continuous LED low angle direct ringlights, inner diameter 94 mm, 75°, green, RT-EXT-24V-F-3M 3 meters cable included.
RT‑LLA‑75‑130‑3‑B‑24V‑FL	Continuous LED low angle direct ringlights, inner diameter 94 mm, 75°, blue, RT-EXT-24V-F-3M 3 meters cable included.

RT‑LSW‑15‑050‑2‑W‑24V‑FL	Continuous LED direct ringlight, inner diameter 28 mm, 15°, white, RT-EXT-24V-F-3M 3 meters cable included.
RT‑LSW‑15‑050‑2‑R‑24V‑FL	Continuous LED direct ringlight, inner diameter 28 mm, 15°, red, RT-EXT-24V-F-3M 3 meters cable included.
RT‑LSW‑15‑050‑2‑G‑24V‑FL	Continuous LED direct ringlight, inner diameter 28 mm, 15°, green, RT-EXT-24V-F-3M 3 meters cable included.
RT‑LSW‑15‑050‑2‑B‑24V‑FL	Continuous LED direct ringlight, inner diameter 28 mm, 15°, blue, RT-EXT-24V-F-3M 3 meters cable included.

LTDV1CH‑17V

Strobe controller 1 channel variable current 5 mA - 17A

RT‑BHDS‑25X36‑1‑W‑24V‑FL	Continuous flat side-emitting LED backlight, one side edge to edge type, 36X25 illumination area, white, RT-EXT-24V-F-3M 3 meters cable included.
RT‑BHDS‑25X36‑1‑R‑24V‑FL	Continuous flat side-emitting LED backlight, one side edge to edge type, 36X25 illumination area, red, RT-EXT-24V-F-3M 3 meters cable included.
RT‑BHDS‑25X36‑1‑G‑24V‑FL	Continuous flat side-emitting LED backlight, one side edge to edge type, 36X25 illumination area, green, RT-EXT-24V-F-3M 3 meters cable included.
RT‑BHDS‑25X36‑1‑B‑24V‑FL	Continuous flat side-emitting LED backlight, one side edge to edge type, 36X25 illumination area, blue, RT-EXT-24V-F-3M 3 meters cable included.

RT‑LBRX‑00‑040‑6‑W‑24V‑FL	Continuous LED bar light, 40X26.3 illumination area, white, RT-EXT-24V-F-3M 3 meters cable included.
RT‑LBRX‑00‑040‑6‑R‑24V‑FL	Continuous LED bar light, 40X26.3 illumination area, red, RT-EXT-24V-F-3M 3 meters cable included.
RT‑LBRX‑00‑040‑6‑G‑24V‑FL	Continuous LED bar light, 40X26.3 illumination area, green, RT-EXT-24V-F-3M 3 meters cable included.
RT‑LBRX‑00‑040‑6‑B‑24V‑FL	Continuous LED bar light, 40X26.3 illumination area, blue, RT-EXT-24V-F-3M 3 meters cable included.

CB244P1500	Power cable, side 1 M8 connector straight, side 2 cable end - 2 m - type 1 labels
CB244P1500L	Power cable, side 1 M8 connector angled, side 2 cable end - 2 m - type 1 labels

Design & development by Opto Engineering → SEO and consulting by Dipiemme Studio