The system developed by Puffin Automation is based on several different preset configurations so that cameras, lighting and optics are automatically positioned for each unique inspection step. Once a particular configuration is loaded, cameras, lights, focusing and part positioning are all automatically adjusted to ensure that the best image is captured for each part. There are more than 120 parameters associated with each part, including light position and intensity, camera position, exposure, regions of Interest (ROI) location and size, etc. Thanks to the large view angle (>82°) and innovative optical design, PCHI023 is in fact compatible with a wide range of hole diameters (from approximately 10 mm to 120 mm) such as cylinders, cones, holes, bottles or threaded objects. The whole system consists of six vision stations that check for defects on the internal surface, on the outside surface, on the top surface, the concentricity of the part and (after the part is flipped) also on the bottom surface. For the inspection of the inner surface Puffin Automation selected Opto Engineering PCHI023 hole inspection optics for 2/3” detectors and 360° inside view in perfect focus.