Opto Engineering® - 20 years
Home Optics Telecentric lenses TCLWD3M series
TCLWD020-275-23
Specifications
Downloads
Compatible products
Main optical specifications
Magnification (x) 0.200
Image circle diameter (mm) 11.0
Max sensor size 2/3″
Object field of view
1/2.5” (1) (mm × mm) 28.50 x 21.40
1/1.8” (1) (mm × mm) 35.65 x 26.65
2/3” (1) (mm × mm) 42.50 x 35.45
1″ (1) (mm × mm) ø = 37.55
1.1″ (1) (mm × mm) ø = 51.85
Advanced optical specifications
Working distance (2) (mm) 274
Working ƒ/N (3) 8
Telecentricity (4) (deg) < 0.15
Distortion (5) (%) < 0.15
Depth of field (6) (mm) 10.40
Resolution (7) (μm) 25
Mechanical specifications
Mount C
Phase adjustment Yes
Length (8) (mm) 201
Front diameter (mm) 82
Mass (g) 651

Last update 05 Sep 2023

REACH

Notes

  1. Object field of view (mm x mm). For the fields with the indication "Ø =", the image of a circular object of such diameter is fully inscribed into the detector.
  2. Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion.
  3. Working f-number (wf/N): the real f-number of a lens in operating conditions.
  4. Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
  5. Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
  6. At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm.
  7. Object side, calculated with the Rayleigh criterion with λ= 520 nm
  8. Measured from the front end of the mechanics to the camera flange.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

Product user guide
Back focal adjustment

Datasheet

Download datasheet

Layout files

DXF
IGS
PDF
STEP
SLDPRT
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
ITA50-GM-10C
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Mono, 1 GigE, POE, C mount
ITA50-GC-10C
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Color, 1 GigE, POE, C mount
ITA50-GM-10C-PL
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Polar Mono, 1 GigE, POE, C mount
ITA50-GC-10C-PL
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Polar Color, 1 GigE, POE, C mount
ITA81-GM-20C
Area scan camera 2856 x 2848 MP, Sony IMX546, CMOS Global shutter, 2/3", Mono, 1 GigE, POE, C mount
ITA81-GC-20C
Area scan camera 2856 x 2848 MP, Sony IMX546, CMOS Global shutter, 2/3", Color, 1 GigE, POE, C mount
PT036-056
Calibration pattern
PT036-056-C
Checkerboard calibration pattern for telecentric lens with certificate
Request a quote
Add this product to the quote request list.