Opto Engineering® - 20 years Opto Engineering® - 20 years Opto Engineering. Our first 20 years →
Opto Engineering® - 20 years
Home Optics Telecentric lenses TCBENCH series
TCBENCH064

Specifications

Main optical specifications
Magnification (x) 0.138
Image circle diameter (mm) 11.0
Max sensor size 2/3″
Object field of view
1/3” (mm × mm) 34.78 x 26.09
1/2.5” (mm × mm) 41.30 x 31.01
1/2” (mm × mm) 46.38 x 34.78
1/1.8” (mm × mm) 51.67 x 38.62
2/3” (mm × mm) 61.59 x 51.38
Advanced optical specifications
Working distance (1) (mm) 181.8
Working ƒ/N (2) 8
Telecentricity typical (max) (3) (deg) < 0.05 (0.08)
Distortion typical (max) (4) (%) < 0.03 (0.07)
Depth of field (5) (mm) 21.70
Resolution (6) (μm) 37
Electrical specifications
Light color, peak wavelength green, 520 nm
Supply voltage (V) 12-24
Max power consumption (W) 2.5
LED voltage (7) (V) 3.3 (4.0)
LED current (8) (mA) 350
Max pulse current (9) (mA) 2000
Mechanical specifications
Mount C
Phase adjustment No
Length (10) (mm) 845
Width (mm) 143
Height (mm) 161
Mass (g) 8700
Environmental specifications
Operating temperature (°C) 0-40
Storage temperature (°C) 0-50
Operating relative humidity (%) 20-85, non condensing
Installation Indoor use only
Eye safety
Risk group according to CEI EN 62471:2010 Risk group 1

Last update 18 Nov 2022

CE
ROHS
REACH
WEEE
UKCA

Notes

  1. Working distance: distance between the front end of the mechanics and the object. Set this distance within ± 3% of the nominal value for maximum resolution and minimum distortion.
  2. Working f-number (wf/N): the real f-number of a lens in operating conditions.
  3. Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
  4. Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
  5. At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm.
  6. Object side, calculated with the Rayleigh criterion with λ= 520 nm
  7. At max forward current. Tolerance is ± 0.06V on forward voltage measurements.
  8. Used in continuous (not pulsed) mode.
  9. At pulse width <= 10 ms, duty cycle <= 10% condition. Built-in electronics board must be bypassed (see tech info).
  10. Measured from the camera flange of the objective lens to the electronic end of the illuminator. Cable, connector and mount thread excluded.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Required field
Required field
Required field
Required field
Required field
Required field
Required field
Required field
Minimun length: 6 characters
Required field
Required field

Compatible products

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
RT-mvBC-X104iG
Camera with interface 1 GigE, sensor size 1/1.8", 3.2 MP, resolution 2064 x 1544, sensor name IMX265, sensor type CMOS
RT-mvBC-XD104hG
Camera with interface Dual GigE, sensor size 1/1.8", 3.2 MP, resolution 2064 x 1544, sensor name IMX252, sensor type CMOS
RT-mvBC-XD105aG
Camera with interface Dual GigE, sensor size 2/3", 5.1 MP, resolution 2464 x 2056, sensor name IMX250, sensor type CMOS
COE-G series
COE-G series
GenICam® PoE C-mount cameras
COE-032-M-POE-040-IR-C
Area scan camera IMX265, CMOS, Global shutter, 2048 x 1536, 3.1 MP, 3.45 μm, 1/1.8", Mono, 37.5 fps, 1 GigE, POE, C-mount, AR filter
COE-032-C-POE-040-IR-C
Area scan camera IMX265, CMOS, Global shutter, 2048 x 1536, 3.1 MP, 3.45 μm, 1/1.8", Color, 37.5 fps, 1 GigE, POE, C-mount, IR cut filter
PS series
PS series
Power supplies
RT-SDR-120-24
DIN rail power supply
LTIC series
LTIC series
LED lighting controllers
LTICOBUL1000CH1-24VUKTB
24VDC analog lighting controller 1 channel, UK power cord, Illumination cable, side A SM 3 way male connector, side B terminal blocks connector, 24V - 3m
LTICOBUL1000CH1-24VUSTB
24VDC analog lighting controller 1 channel, UK power cord, Illumination cable, side A SM 3 way male connector, side B terminal blocks connector, 24V - 3m
LTSCHP1W-G
Replacement LED module, green
LTSCHP1W-GZ
Replacement LED module with diffuser, green