Opto Engineering® - 20 years Opto Engineering® - 20 years Opto Engineering. Our first 20 years →
Opto Engineering® - 20 years
Home Optics Telecentric lenses TC16M series
TC16M144

Specifications

Main optical specifications
Magnification (x) 0.245
Image circle diameter (mm) 43.3
Max sensor size 35 mm Full Frame
Object field of view
APS-C IMX342 (mm × mm) 91.27 x 68.45
CHR70M (mm × mm) 126.53 x 89.76
Line 8k-5µm mm 166.53
Full Frame (mm × mm) 146.94 x 97.96
CMV50000 (mm × mm) 148.70 x 112.73
Advanced optical specifications
Working distance (1) (mm) 397.4
Working ƒ/N (2) 16
Telecentricity typical (max) (3) (deg) < 0.05 (0.08)
Distortion typical (max) (4) (%) < 0.08 (0.20)
Field depth (5) (mm) 22.00
Resolution (6) (μm) 41
Mechanical specifications
Mount (7) F
Phase adjustment (8) No
Length (9) (mm) 597.8
Front diameter (mm) 200
Mass (g) 6138

Last update 11 Apr 2022

REACH

Notes

  1. Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion.
  2. Working f-number (wf/N): the real f-number of a lens in operating conditions.
  3. Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
  4. Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
  5. At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 5.5 μm.
  6. Object side, calculated with the Rayleigh criterion with λ= 520 nm
  7. FD stands for Flange Distance (in mm), defined as the distance from the mounting flange (the “metal ring” in rear part of the lens) to the camera detector plane.
  8. Indicates the availability of an integrated camera phase adjustment feature.
  9. Measured from the front end of the mechanics to the camera flange.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Required field
Required field
Required field
Required field
Required field
Required field
Required field
Required field
Minimun length: 6 characters
Required field
Required field

Compatible products

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
LTBRDC series
LTBRDC series
Continuous LED bar lights
LTZPFL200-00-6-R-24V
LED bar light, 6 LED rows, 200x26.3 illumination area, red, 630 nm, 24V
LTZPFL200-00-6-G-24V
LED bar light, 6 LED rows, 200x26.3 illumination area, green, 525 nm, 24V
LTZPFL200-00-6-B-24V
LED bar light, 6 LED rows, 200x26.3 illumination area, blue, 470 nm, 24V
LTZPFL200-00-6-W-24V
LED bar light, 6 LED rows, 200x26.3 illumination area, white, 6300 K, 24V
LTRN144RD
Ring LED illuminator, inner diameter 200.0 mm, straight type, red, 630 nm
LTRN144GR
Ring LED illuminator, inner diameter 200.0 mm, straight type, green, 525 nm
LTRN144BL
Ring LED illuminator, inner diameter 200.0 mm, straight type, blue, 470 nm
LTRN144NW
Ring LED illuminator, inner diameter 200.0 mm, straight type, white, 6300 K
LTCLHP144-R
Telecentric HP illuminator, beam diameter 180 mm, red, 625 nm
LTCLHP144-G
Telecentric HP illuminator, beam diameter 180 mm, green, 525 nm
LTBC series
LTBC series
Continuous LED backlight
LTBC234234-W
Continuos LED backlight, 234.5x235.5 mm illumination area, white, 6300 K
LTBC234234-G
Continuos LED backlight, 234.5x234.5 mm illumination area, green, 525 nm
CMHO series
CMHO series
Clamping mechanics for lenses
CMHO144
Clamping mechanics for TCxx130, TCxx144 lenses and LTCLHP144-X illuminators