Opto Engineering® - 20 years
Home Cameras Area Scan Cameras ITALA G.EL series
EMVA 1288 Data
Compatible products
Sensor specifications
Megapixel 8.9
Resolution 4112 x 2176
Sensor format 1"
Active area (mm) 16.0
Pixel size (μm) 3.45
Sensor model IMX267
Sensor type CMOS
Shutter Global
Chroma Mono
Camera specifications
Filter AR glass
Frame rate (1) (fps) 13.1
Burst frame rate (fps) 18.0
Exposure time 1.51 μs - 10 s
ADC resolution (bit) 10/12
Dynamic range (dB) 70.0
Gain range (dB) 0-48
SNR (dB) 40.2
Image buffer (MB) 384
Image processing Binning, decimation, ROI, gamma, black level, LUT, defective pixel correction
Pixel formats Mono 8/ 10p/ 10Packed/ 12p/12Packed
Chunk data yes
User sets 3
Timers/Counters 2/4
Synchronization Free run, software trigger, hardware trigger, PTP (IEEE 1588)
Connectivity and electrical specifications
Data connector RJ45
Data interface 1 GigE
I/O connector 12-pin Hirose
I/O interface 2x opto-isolated input, 1x opto-isolated output
Serial interface no
Liquid lens controller yes (EL-3-10, EL-16-40)
Encoder interface yes, incremental
Power supply (V) 12-24, PoE (IEEE 802.3af class 2)
Max power consumption (2) (W) 5.8
Compliance and reliability
Standards GigE Vision 2.2, GenICam, GenTL
Client software ITALA View or other GigE Vision 2.x software
Operating systems 64-bit Windows 10/11, Ubuntu 18.04/20.04/22.04
Shock and vibrations EN 60068-2-27, EN 60068-2-6, EN 60068-2-64
Warranty (years) 5
Mechanical specifications
Mount C
Dimensions (mm) 40.5 x 40.5 x 51.2
Clamping system 16x M3 threaded holes (on all sides)
Mass (g) 142
Environmental specifications
Operating temperature (3) (°C ) -25 - +65
Storage temperature (4) (°C ) -10 - +60
Operating relative humidity (%) 20-80, non condensing
IP rating IP30

Last update 01 Sep 2023



  1. Color-model's fps are calculated using RGB8 pixel format
  2. Measured with 24V power supply and liquid lens connected to the camera
  3. Case temperature, measured on the front part of the camera body
  4. Ambient temperature
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
EMVA1288 Data
Quantum efficiency (%) 60.9
System gain (DN/e-) 0.4
SNR (dB) 40.1
Dynamic range (dB) 70.1
Sensitivity threshold (e-) 3.2
Saturation capacity (e-) 10265
Dark current (e-/s) 10.2
Temporal Dark Noise (e-) 2.6
Dark Signal Non-Uniformity (DSNU) (e-) 1.2
Photo Response Non-Uniformity (PRNU) (%) 0.5
Linearity Error (%) -0.46 / 0.69

Last update 01 Sep 2023

Technical documents

ITALA User Manual


ITALA SDK (Windows 64 bit) v2023.08.30
ITALA SDK (Ubuntu) v2023.08.30


ITALA Firmware v1.5.2
ITALA Firmware v1.5.2 ChangeLog
ITALA Firmware v1.4.4
ITALA Firmware v1.4.2
ITALA Firmware v1.4.1
ITALA Firmware v1.4.0
ITALA Firmware v1.3.2
ITALA Firmware v1.3.1
ITALA Firmware v1.3.0


Download datasheet
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
PS series
PS series
Power supplies
15.4W Single Port Power-over-Ethernet IEEE802.3af Power Injector
CB series
CB series
Ethernet cable, CAT6, industrial level,high flexible cable with screw, 5 m
I/O cable, side 1 HIROSE 12 pin, side 2 HIROSE 6 pin, 0.3 m
I/O cable, side 1 HIROSE 12 pin, side 2 HIROSE 6 pin, side 3 cable end, 3m+0.3m
Request a quote
Add this product to the quote request list.