Specifications
EMVA 1288 Data
Downloads
Compatible products
| Sensor specifications | ||
| Megapixel | 3.2 | |
| Resolution | 2064 x 1544 | |
| Sensor format | 1/1.8" | |
| Active area | (mm) | 8.8 |
| Pixel size | (μm) | 3.45 |
| Sensor model | IMX265 | |
| Sensor type | CMOS | |
| Shutter | Global | |
| Chroma | Mono | |
| Camera specifications | ||
| Filter | AR glass | |
| Frame rate | (fps) | 37.3 |
| Burst frame rate | (fps) | 55.6 |
| Exposure time | 1.51 μs - 10 s | |
| ADC resolution | (bit) | 10/12 |
| Dynamic range | (dB) | 70.0 |
| Gain range | (dB) | 0-48 |
| SNR | (dB) | 40.2 |
| Image buffer | (MB) | 384 |
| Image processing | Binning, decimation, ROI, gamma, black level, LUT, defective pixel correction | |
| Pixel formats | Mono 8/ 10p/ 10Packed/ 12p/12Packed | |
| Chunk data | yes | |
| User sets | 3 | |
| Timers/Counters | 2/4 | |
| Synchronization | Free run, software trigger, hardware trigger, PTP (IEEE 1588) | |
| Connectivity and electrical specifications | ||
| Data connector | RJ45 | |
| Data interface | 1 GigE | |
| I/O connector | 12-pin Hirose | |
| I/O interface | 2x opto-isolated input, 4x opto-isolated output | |
| Serial interface | no | |
| Liquid lens controller | yes (EL-3-10, EL-16-40) | |
| Encoder interface | yes, incremental | |
| Power supply | (V) | 12-24, PoE (IEEE 802.3af class 2) |
| Max power consumption (1) | (W) | 5.5 |
| Compliance and reliability | ||
| Standards | GigE Vision 2.x, GenICam, GenTL | |
| Client software | ITALA View or other GigE Vision 2.x software | |
| Operating systems | 64-bit Windows 10/11 | |
| Shock and vibrations (2) | n.a. | |
| Warranty | (years) | 5 |
| Mechanical specifications | ||
| Mount | C | |
| Dimensions | (mm) | 40.5 x 40.5 x 51.2 |
| Clamping system | 16x M3 threaded holes (on all sides) | |
| Mass | (g) | 142 |
| Environmental specifications | ||
| Operating temperature (3) | (°C ) | -25 - +65 |
| Storage temperature (4) | (°C ) | -10 - +60 |
| Operating relative humidity | (%) | 20-80, non condensing |
| IP rating | IP30 | |
Last update 21 Mar 2023
Notes
- Measured with 24V power supply and liquid lens connected to the camera
- To be measured after pre-series production
- Case temperature, measured on the front part of the camera body
- Ambient temperature
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
| EMVA1288 Data | ||
| Quantum efficiency | (%) | 60.9 |
| System gain | (DN/e-) | 0.4 |
| SNR | (dB) | 40.1 |
| Dynamic range | (dB) | 70.1 |
| Sensitivity threshold | (e-) | 2.6 |
| Saturation capacity | (e-) | 10379 |
| Dark current | (e-/s) | 6.2 |
| Temporal Dark Noise | (e-) | 2.2 |
| Dark Signal Non-Uniformity (DSNU) | (e-) | 0.7 |
| Photo Response Non-Uniformity (PRNU) | (%) | 0.5 |
| Linearity Error | (%) | -0.26 / 0.45 |
Last update 21 Mar 2023
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
PCHI012-AF
Compact pericentric lens for 1/2"sensors, liquid lens focusing
PCBP013-AF
Boroscopic probe for 1/3" detectors, liquid lens focusing
PCBP012-AF
Boroscopic probe for 1/2" detectors, liquid lens focusing
RT-POE15M-1AFE-R
15.4W Single Port Power-over-Ethernet IEEE802.3af Power Injector
CBETH003
Ethernet cable, CAT6, industrial level,high flexible cable with screw, 5 m
CBGPEL12P6P-03M
I/O cable, side 1 HIROSE 12 pin, side 2 HIROSE 6 pin, 0.3 m
CBGPIO12PY6P-3M
I/O cable, side 1 HIROSE 12 pin, side 2 HIROSE 6 pin, side 3 cable end, 3m+0.3m
Request a quote
Add this product to the quote request list.
Product images
