LT2PRXP-G

Home Lighting LED pattern projectors LT2PRXP series

LT2PRXP-G

Specifications

Downloads

Compatible products

Lighting specifications
Active area diameter	(mm)	17.6
Light color, peak wavelength		green, 525 nm
Spectral FWHM	(nm)	35
Illuminance (continuous) (1)	(klux)	1188
Irradiance (continuous) (1)	(W/m2)	2380
Illuminance (strobe) (1)	(klux)	1932
Irradiance (strobe) (1)	(W/m2)	4190

Electrical specifications
Operating mode		Continuous and strobe
Power supply mode		-
Supply voltage (2)	(V)	24
Current (2)	(A)	0.9
Power consumption (2)	(W)	20.4
Peak power consumption (3)	(W)	48.0
Max LED forward current (3)	(A)	3.0
Min pulse duration	(µs)	2
Max pulse duration	(ms)	10
Max duty-cycle	(%)	10
Typical pulse delay	(ns)	400
Typical jitter	(ns)	100
I/O interface		PNP logic input, NPN logic input, analog dimming input
Connector		M12 straight plug male connector
Cables		20 cm pigtail

Mechanical specifications
Mount		C
Phase adjustment		Yes
Length	(mm)	100.7
Width	(mm)	59.1
Height	(mm)	59.1
Mass	(g)	332

Environmental specifications
Operating temperature	(°C)	0-40
Storage temperature	(°C)	0-50
Operating relative humidity	(%)	20-85, non condensing
Installation		Indoor use only
IP rating		IP30

Eye safety
Risk group according to CEI EN 62471:2010		Risk group 1

Last update 24 Jan 2024

Notes

At pattern emitting surface.
Continuous mode, using the integrated electronic driver.
Strobe mode.

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

LT2PR Manual

pdf

Datasheet

Download datasheet

PDF

Layout files

DXF

IGS

PDF

STEP

SLDPRT

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.