Specifications
Downloads
Compatible products
Tech notes
| Main optical specifications | ||
| Focal length | (mm) | 6 |
| Magnification (1) | (x) | 0.084 |
| Image circle diameter | (mm) | 8.9 |
| Max sensor size | 1/1.8″ | |
| Angle of view | ||
| 1/3” | (deg) | 54.0 |
| 1/1.8” | (deg) | 74.5 |
| 2/3” | (deg) | - |
| Object field of view | ||
| 1/3” (1) | 57.14 x 42.86 | |
| 1/1.8" (1) | 84.88 x 63.45 | |
| 2/3” (1) | - | |
| Advanced optical specifications | ||
| Working distance range (2) | (mm) | 60 - inf |
| ƒ/N | 5.6 | |
| Back focal length | (mm) | 7.9 |
| Distortion (3) | (%) | < 4.0 |
| Liquid lens specifications | ||
| Liquid lens model | Optotune EL-3-10 | |
| Temperature sensor | Yes | |
| Focal power mode | Yes | |
| Response time (4) | (ms) | 1 |
| Setting time (4) | (ms) | 4 |
| Current range | (mA) | -120 to +120 |
| Lifecycles (10%-90% sinusoidal) | >1,000,000,000 | |
| Connector | HR10A-7R-6PB | |
| Mechanical specifications | ||
| Mount | C | |
| Phase adjustment | Yes | |
| Filter thread | M30.5 x 0.5 | |
| Front diameter | (mm) | 33.0 |
| Length (5) | (mm) | 40.9 |
| Mass | (g) | 87 |
| Environmental specifications | ||
| Operating temperature | (°C) | 0-40 |
| Storage temperature | (°C) | 0-50 |
| Operating relative humidity | (%) | 20-85, non condensing |
| Installation | Indoor use only | |
Last update 14 Feb 2024
Notes
- Calculated at minimum object distance.
- Working distance: distance between the front end of the mechanics and the object.
- Percent deviation of the real image compared to an ideal, undistorted image.
- Typical at 30°C, 0 to ±250 mA step.
- Measured from the front end of the mechanics to the camera flange.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
ITA32-GM-10C-EL
Area scan camera 2064 x 1544 MP, Sony IMX265, CMOS Global shutter, 1/1.8", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
ITA32-GC-10C-EL
Area scan camera 2064 x 1544 MP, Sony IMX265, CMOS Global shutter, 1/1.8", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
ITA51-GM-20C-EL
Area scan camera 2472 x 2064 MP, Sony IMX547, CMOS Global shutter, 1/1.8", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
ITA51-GC-20C-EL
Area scan camera 2472 x 2064 MP, Sony IMX547, CMOS Global shutter, 1/1.8", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
FTBP470M30.5
Optical filter, band pass, blue
FTBP525M30.5
Optical filter, band pass, green
FTBP635M30.5
Optical filter, band pass, red
FTBP660M30.5
Optical filter, band pass, dark red
FTBP850M30.5
Optical filter, band pass, IR
FTSP450M30.5
Optical filter, short pass, dark blue
FTSP500M30.5
Optical filter, short pass, blue
FTSP570M30.5
Optical filter, short pass, cyan
FTSP700M30.5
Optical filter, UV+NIR cut off, VIS
FTLP510M30.5
Optical filter, long pass, yellow
FTLP550M30.5
Optical filter, long pass, orange
FTLP590M30.5
Optical filter, long pass, red
FTLP640M30.5
Optical filter, long pass, dark red
CBGPIO6PMF-3M
6 Pin Hirose Male - Female moulded connector cable, 3 m
CBGPEL12P6P-03M
I/O cable, side 1 HIROSE 12 pin, side 2 HIROSE 6 pin, 0.3 m
CBGPIO12PY6P-3M
I/O cable, side 1 HIROSE 12 pin, side 2 HIROSE 6 pin, side 3 cable end, 3m+0.3m
Tech notes
Liquid Lens
Request a quote
Add this product to the quote request list.
Product images
