Optical specifications
Beam diameter	(mm)	150
Working distance range	(mm)	220 - 440
Light color, peak wavelength (1)		red, 630 nm
Mechanical specifications
Length (2)	(mm)	408.2
Outer diameter	(mm)	180
Mass	(g)	4596
Electrical specifications
Device power ratings
DC voltage minimum (3)	(V)	12
DC voltage maximum (3)	(V)	24
Power consumption	(W)	< 2.5
Max LED forward current (4)	(mA)	350
Cables		CB244P1500 included
LED power ratings
Forward voltage (typical) (5)	(V)	2.4
Forward voltage (max) (5)	(V)	3.00
Max pulse current (6)	(mA)	2000
Eye safety
Risk group according to CEI EN 62471:2010		Exempt

Last update: 2021-06-22

Notes

Opto Engineering® recommends green light for high precision measurement applications
Nominal value, with no spacers in place
Tolerance ± 10%
Used in continuous (not pulsed) mode
At max forward current. Tolerance is ±0.06V on forward voltage measurements
At pulse width <= 10 ms, duty cycle <= 10% condition. Built-in electronics board must be bypassed (see tech info)

Connection

Device side - male pins
Front view

Pinout reference

Pin: Function

1: Earth
2: GND
3: LED Anode
4: Power supply (+12÷24 V)

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

Compatible products

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.

TC telecentric lens for matrix detectors

TC series

Bi-telecentric lenses for sensors up to 2/3”

+ View all products

TC23110	Bi-telecentric lens for 2/3″ detectors, magnification 0.079 x, C-mount
TC12120	Bi-telecentric lens for 1/2″ detectors, magnification 0.052 x, C-mount
TC13120	Bi-telecentric lens for 1/3″ detectors, magnification 0.038 ×, C-mount
TC23120	Bi-telecentric lens for 2/3″ detectors, magnification 0.072 x, C-mount

TC CORE series

Compact bi-telecentric lenses for sensors up to 2/3”

+ View all products

TCCR12120

Bi-telecentric CORE lens for 1/2″ detectors, magnification 0.052 x, C-mount

TC1MHR-TC4MHR CORE series

Compact telecentric lenses for sensors up to 4/3”

+ View all products

TCCR2M120‑E	Telecentric CORE lens for 1″ detectors, magnification 0.104 x, M42x1 FD 16
TCCR2M120‑F	Telecentric CORE lens for 1″ detectors, magnification 0.104 x, F
TCCR4M120‑C	Telecentric CORE lens for 4/3″ detectors, magnification 0.143 x, C
TCCR4M120‑F	Telecentric CORE lens for 4/3″ detectors, magnification 0.143 x, F
TCCR4M120‑E	Telecentric CORE lens for 4/3″ detectors, magnification 0.143 x, M42x1 FD 16

High-resolution telecentric lens for large detectors

TC1MHR-TC4MHR series

Telecentric lenses for sensors up to 4/3”

+ View all products

TC1MHR120‑C	High resolution telecentric lens for 1/1.2" detectors, magnification 0.087x, C-mount
TC2MHR120‑C	High resolution telecentric lens for 1″ detectors, magnification 0.104x, C-mount
TC2MHR120‑F	High resolution telecentric lens for 1″ detectors, magnification 0.104x, F-mount
TC2MHR120‑E	High resolution telecentric lens for 1″ detectors, magnification 0.104x, mount M42X1 FD=16
TC3MHR120‑C	High resolution telecentric lens for 1.1” detectors, magnification 0.118x, C-mount
TC4MHR120‑C	High resolution telecentric lens for 4/3″ detectors, magnification 0.143x, C-mount
TC4MHR120‑F	High resolution telecentric lens for 4/3″ detectors, magnification 0.143x, F-mount
TC4MHR120‑E	High resolution telecentric lens for 4/3″ detectors, magnification 0.143x, mount M42X1 FD=16

TC16M telecentric lens for very large detectors

TC16M series

Telecentric lenses for sensors up to 43.3 mm and 8k line scan cameras

+ View all products

TC16M120	Telecentric lens for 35 mm detectors, magnification 0.289 x, F-mount
TC16M120‑Q	Telecentric lens for 35 mm detectors, magnification 0.289 x, mount M58x0.75 FD = 6.56

TC12K telecentric lens for line scan cameras

TC12K series

Telecentric lenses for sensors up to 62 mm and 12k line scan cameras

+ View all products

TC12K120

Telecentric lens for 12k and 16k line scan cameras, magnification 0.529 x, M72 x 0.75 mount

TC12M High resolution telecentric lenses for up APS-H sensors

TC12M series

Telecentric lenses for sensors up to APS-H and 4k line scan cameras

+ View all products

TC12M120‑F	High resolution telecentric lenses, magnification 0.233, WD 303.9, F mount
TC12M120‑J	High resolution telecentric lenses, magnification 0.233, WD 303.10, M42x1 FD12

TCDP series

Double port bi-telecentric lens for detector up to 2/3''

+ View all products

TCDP2X120	Double magnification bi-telecentric lens, for detectors up to 2/3″
TCDP4X120	Double magnification bi-telecentric lens, for detectors up to 2/3″

CPDPH series

Diffuser caps for telecentric illuminators

+ View all products

CPDPH01	Diffuser cap for telecentric illuminators, diffusive diameter 2.77 mm
CPDPH02	Diffuser cap for telecentric illuminators, diffusive diameter 0.8 mm
CPDPH03	Diffuser cap for telecentric illuminators, diffusive diameter 5 mm
CPDPH04	Diffuser cap for telecentric illuminators, diffusive diameter 12 mm

Accessories

Accessories and add-ons to make the most of Opto Engineering^® lenses.

+ View all products

	Diffuser cap for LTCLHP illuminators
LED1W‑R	Replacement LED source, red

CMHO series

Clamping mechanics for lenses

+ View all products

CMHO120

Clamping mechanics for TCxx110, TCxx120 lenses and LTCLHP120-X illuminators

LTSCHP series

High-performance replacement LED modules

+ View all products

LTSCHP1W‑R

Replacement LED module, red

PS series

Power supplies

+ View all products

RT‑SDR‑120‑24

24VDC DIN rail power supply

CB series

Cables

+ View all products

CB244P1500	Power cable, side 1 M8 connector straight, side 2 cable end - 2 m - type 1 labels
CB244P1500L	Power cable, side 1 M8 connector angled, side 2 cable end - 2 m - type 1 labels

LTIC series

LED lighting controllers

+ View all products

LTIC1CH‑A1‑4	Analogue lighting controller unit, 4A, 24V
LTIC1CH‑D1‑4	Digital lighting controller unit, 4A, 24V
LTICOBUL1000CH1‑24VUSTB	24VDC analog lighting controller 1 channel, UK power cord, Illumination cable, side A SM 3 way male connector, side B terminal blocks connector, 24V - 3m
LTICOBUL1000CH1‑24VEUTB	24VDC analog lighting controller 1 channel, UK power cord, Illumination cable, side A SM 3 way male connector, side B terminal blocks connector, 24V - 3m
LTICOBUL1000CH1‑24VUKTB	24VDC analog lighting controller 1 channel, UK power cord, Illumination cable, side A SM 3 way male connector, side B terminal blocks connector, 24V - 3m

Company & Resources

Optical imaging technologies OE for the future Who we are A history of innovation Committed to quality Joint ventures Where we are Legal Product awards Corporate videos 2D and 3D models Image gallery Video gallery Search OE products by applications Application notes Basics Frequently asked questions Press Review Jobs at Opto Engineering^®

Fiscal code and registration number at Mantova Business Register 02011230204, Nr. REA: MN-216669, Share Capital: 200.000,00 €
Design & development by Opto Engineering® → SEO and consulting by Dipiemme Studio

Company & Resources

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT

Company & Resources

Follow us

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT