Optics finder Lighting finder Camera finder Imaging lens selector

Get the right product, right from the start

TCBENCH064

Telecentric optical bench, magnification 0.138x

Download datasheet

← Prev Next →

Specifications

Main optical specifications
Magnification	(x)	0.138
Image circle diameter	(mm)	11.0
Max sensor size		2/3″
Object field of view
1/3”	(mm × mm)	34.78 x 26.09
1/2.5”	(mm × mm)	41.30 x 31.01
1/2”	(mm × mm)	46.38 x 34.78
1/1.8”	(mm × mm)	51.67 x 38.62
2/3”	(mm × mm)	61.59 x 51.38
Advanced optical specifications
Working distance (1)	(mm)	181.8
Working ƒ/N (2)		8
Telecentricity typical (max) (3)	(deg)	< 0.05 (0.08)
Distortion typical (max) (4)	(%)	< 0.03 (0.07)
Field depth (5)	(mm)	21.70
Resolution (6)	(μm)	37
Electrical specifications
Light color, peak wavelength		green, 520 nm
Supply voltage	(V)	12-24
Max power consumption	(W)	2.5
LED voltage (7)	(V)	3.3 (4.0)
LED current (8)	(mA)	350
Max pulse current (9)	(mA)	2000
Mechanical specifications
Mount		C
Phase adjustment		No
Length (10)	(mm)	845
Width	(mm)	143
Height	(mm)	161
Mass	(g)	8700
Environmental specifications
Operating temperature	(°C)	0-40
Storage temperature	(°C)	0-50
Operating relative humidity	(%)	20-85, non condensing
Installation		Indoor use only
Eye safety
Risk group according to CEI EN 62471:2010		Risk group 1

Last update: 07 Apr 2022

Notes

Working distance: distance between the front end of the mechanics and the object. Set this distance within ± 3% of the nominal value for maximum resolution and minimum distortion.
Working f-number (wf/N): the real f-number of a lens in operating conditions.
Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm.
Object side, calculated with the Rayleigh criterion with λ= 520 nm
At max forward current. Tolerance is ± 0.06V on forward voltage measurements.
Used in continuous (not pulsed) mode.
At pulse width <= 10 ms, duty cycle <= 10% condition. Built-in electronics board must be bypassed (see tech info).
Measured from the camera flange of the objective lens to the electronic end of the illuminator. Cable, connector and mount thread excluded.

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

pdf dxf igs step sldprt

Compatible products

COE-G series

GenICam® PoE C-mount cameras

+ View all products

COE‑023‑M‑POE‑050‑IR‑C	Area scan camera PYTHON 2000, CMOS, Global shutter, 1920 x 1200, 2.3 MP, 4.8 μm, 2/3", Mono, 52.0 fps, 1 GigE, POE, C-mount, AR filter
COE‑023‑C‑POE‑050‑IR‑C	Area scan camera PYTHON 2000, CMOS, Global shutter, 1920 x 1200, 2.3 MP, 4.8 μm, 2/3", Color, 52.0 fps, 1 GigE, POE, C-mount, IR cut filter
COE‑032‑M‑POE‑040‑IR‑C	Area scan camera IMX265, CMOS, Global shutter, 2048 x 1536, 3.1 MP, 3.45 μm, 1/1.8", Mono, 37.5 fps, 1 GigE, POE, C-mount, AR filter
COE‑032‑C‑POE‑040‑IR‑C	Area scan camera IMX265, CMOS, Global shutter, 2048 x 1536, 3.1 MP, 3.45 μm, 1/1.8", Color, 37.5 fps, 1 GigE, POE, C-mount, IR cut filter
COE‑050‑M‑POE‑050‑IR‑C	Area scan camera IMX264, CMOS, Global shutter, 2448 x 2048, 5.0 MP, 3.45 μm, 2/3", Mono, 23.5 fps, 1 GigE, POE, C-mount, AR filter
COE‑050‑C‑POE‑050‑IR‑C	Area scan camera IMX264, CMOS, Global shutter, 2448 x 2048, 5.0 MP, 3.45 μm, 2/3", Color, 23.5 fps, 1 GigE, POE, C-mount, IR cut filter

mvBlueCOUGAR series

GigE / Dual GigE cameras with Smart Features

+ View all products

RT‑mvBC‑X104i	Camera with interface , sensor size , MP, resolution , sensor name , sensor type
RT‑mvBC‑XD104h	Camera with interface , sensor size , MP, resolution , sensor name , sensor type
RT‑mvBC‑X105b	Camera with interface , sensor size , MP, resolution , sensor name , sensor type
RT‑mvBC‑XD105a	Camera with interface , sensor size , MP, resolution , sensor name , sensor type
	Camera with interface 1 GigE, sensor size 1/1.8", 3.2 MP, resolution 2064 x 1544, sensor name IMX265, sensor type CMOS
	Camera with interface Dual GigE, sensor size 1/1.8", 3.2 MP, resolution 2064 x 1544, sensor name IMX252, sensor type CMOS
	Camera with interface Dual GigE, sensor size 2/3", 5.1 MP, resolution 2464 x 2056, sensor name IMX250, sensor type CMOS

COE-U series

GenICam® C-mount USB3 cameras

+ View all products

COE‑050‑M‑USB‑050‑IR‑C

Area scan camera IMX264, CMOS, Global shutter, 2448 x 2048, 5.0 MP, 3.45 μm, 2/3", Mono, 35.0 fps, USB 3.0, C-mount, AR

mvBlueFOX3-2 series

USB3 cameras with Smart Features

+ View all products

RT‑mvBF3‑2032a	USB3 Vision camera with Sony CMOS sensor
RT‑mvBF3‑2032	USB3 Vision camera with Sony CMOS sensor
RT‑mvBF3‑2051a	USB3 Vision camera with Sony CMOS sensor
RT‑mvBF3‑2051	USB3 Vision camera with Sony CMOS sensor
RT‑mvBF3‑2064	USB3 Vision camera with Sony CMOS sensor

LTSCHP series

High-performance replacement LED modules

+ View all products

LTSCHP1W‑G	Replacement LED module, green
LTSCHP1W‑GZ	Replacement LED module with diffuser, green

PS series

Power supplies

+ View all products

RT‑SDR‑120‑24

DIN rail power supply

LTIC series

LED lighting controllers

+ View all products

LTICOBUL1000CH1‑24VUSTB	24VDC analog lighting controller 1 channel, UK power cord, Illumination cable, side A SM 3 way male connector, side B terminal blocks connector, 24V - 3m
LTICOBUL1000CH1‑24VEUTB	24VDC analog lighting controller 1 channel, UK power cord, Illumination cable, side A SM 3 way male connector, side B terminal blocks connector, 24V - 3m
LTICOBUL1000CH1‑24VUKTB	24VDC analog lighting controller 1 channel, UK power cord, Illumination cable, side A SM 3 way male connector, side B terminal blocks connector, 24V - 3m

Company & Resources

Optical imaging technologies Opto Engineering® for the environment Who we are A history of innovation Committed to quality Joint ventures Where we are Legal Awards Corporate videos 2D and 3D models Image gallery Video gallery Search OE products by applications Application notes Basics Frequently asked questions Press Review Jobs at Opto Engineering^®

Fiscal code and registration number at Mantova Business Register 02011230204, Nr. REA: MN-216669, Share Capital: 200.000,00 €
Design & development by Opto Engineering® → SEO and consulting by Dipiemme Studio

Company & Resources

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT

Company & Resources

Follow us

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT