TCSM036

Home Optics Telecentric lenses TCSM series

TCSM036

Specifications

Downloads

Compatible products

Main optical specifications
Object tilt	(deg)	0 15 30 45
Mount tilt	(deg)	0 3.7 8.0 13.6
Horizontal magnification	(x)	0.243 0.243 0.243 0.243
Vertical magnification	(x)	0.243 0.235 0.212 0.177
Max sensor size		2/3″

Field of view, long sensor side horizontal
1/3”	(mm × mm)	19.75 x 14.81 19.75 x 15.32 19.75 x 16.98 19.75 x 20.34
1/2.5”	(mm × mm)	23.46 x 17.61 23.46 x 18.21 23.46 x 20.19 23.46 x 24.18
1/2”	(mm × mm)	26.34 x 19.75 26.34 x 20.43 26.34 x 22.64 26.34 x 27.12
1/1.8”	(mm × mm)	29.34 x 21.93 29.34 x 22.68 29.34 x 25.14 29.34 x 30.11
2/3”	(mm × mm)	34.98 x 29.18 34.98 x 30.17 34.98 x 33.44 34.98 x 40.06

Field of view, long sensor side vertical
1/3”	(mm × mm)	14.81 x 19.75 14.81 x 20.43 14.81 x 22.64 14.81 x 27.12
1/2.5”	(mm × mm)	17.61 x 23.46 17.61 x 24.26 17.61 x 26.89 17.61 x 32.20
1/2”	(mm × mm)	19.75 x 26.34 19.75 x 27.23 19.75 x 30.19 19.75 x 36.16
1/1.8”	(mm × mm)	19.75 x 17.61 20.43 x 17.61 22.64 x 17.61 27.12 x 17.61
2/3”	(mm × mm)	29.18 x 34.98 29.18 x 36.17 29.18 x 40.09 29.18 x 48.02

Advanced optical specifications
Working distance (1)	(mm)	102.5
Working ƒ/N (2)		8
Telecentricity typical (max) (3)	(deg)	< 0.04 (0.08)
Distortion typical (max) (4)	(%)	< 0.04 (0.10)

Mechanical specifications
Mount		C
Max mount tilt	(deg)	20
Phase adjustment		Yes
Length (5)	(mm)	164.9
Front diameter	(mm)	61.0
Mass	(g)	607

Last update 05 Sep 2023

Notes

Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion.
Working f-number (wf/N): the real f-number of a lens in operating conditions.
Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
Measured from the front end of the mechanics to the camera flange.

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

Product user guide

pdf

Back focal adjustment

pdf

Datasheet

Download datasheet

PDF

Layout files

DXF

IGS

PDF

STEP

SLDPRT

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.