Opto Engineering® - 20 years
Home Optics Telecentric lenses TC4MHR series
TC4MHRP308-J
Specifications
Downloads
Compatible products
Main optical specifications
Magnification (x) 0.059
Image circle diameter (mm) 22.0
Max sensor size 4/3″
Object field of view
1" (mm × mm) 240.51 x 127.29
1.1″ (mm × mm) 240.00 x 175.76
4/3″ (1) (mm × mm) 320.85 x 179.83
Advanced optical specifications
Working distance (2) (mm) 500.0
Working ƒ/N (3) 8
Telecentricity typical (max) (4) (deg) <0.09 (0.10)
Distortion typical (max) (5) (%) <0.07 (0.10)
Depth of field (6) (mm) 118.90
Resolution (7) (μm) 86
Mechanical specifications
Mount M42x1 FD 12
Phase adjustment (8) Yes
Length (9) (mm) 975.9
Front diameter (mm) 417
Mass (g) 38685

Last update 05 Sep 2023

REACH

Notes

  1. With IMX387 (21.7 mm diagonal) sensors, the FOV may show some vignetting at the image corners.
  2. Working distance: distance between the front end of the mechanics and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion.
  3. Working f-number (wf/N): the real f-number of a lens in operating conditions.
  4. Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
  5. Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
  6. At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm.
  7. Object side, calculated with the Rayleigh criterion with λ= 520 nm
  8. Indicates the availability of an integrated camera phase adjustment feature.
  9. Measured from the front end of the mechanics to the camera flange.

Ordering information

It's easy to select the right lens for your application: our models are coded as TC4MHRPyyy-x where yyy refers to the width of the object FOV in mm and -x refers to the mount option:
-C for C-mount
-F for F-mount
-J for M42X1 mount (flange distance FD 12 mm).
For example, TC4MHRP064-F for a F-mount TC4MHR064 lens.
Customized mounts are also available upon request.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

Product user guide
Back focal adjustment

Datasheet

Download datasheet

Layout files

DXF
IGS
PDF
STEP
SLDPRT
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
ITA168-GM-10J
Area scan camera 5472 x 3084 MP, Sony IMX387, CMOS Global shutter, 4/3", Mono, 1 GigE, POE, M42x1 FD 12 mount
ITA168-GC-10J
Area scan camera 5472 x 3084 MP, Sony IMX387, CMOS Global shutter, 4/3", Color, 1 GigE, POE, M42x1 FD 12 mount
ITA196-GM-10J
Area scan camera 4432 x 4436 MP, Sony IMX367, CMOS Global shutter, 4/3", Mono, 1 GigE, POE, M42x1 FD 12 mount
ITA196-GC-10J
Area scan camera 4432 x 4436 MP, Sony IMX367, CMOS Global shutter, 4/3", Color, 1 GigE, POE, M42x1 FD 12 mount
LTCLHP308-G
Telecentric HP illuminator, beam diameter 380 mm, green, 525 nm
PT260-310
Calibration pattern
PT260-310-C
Checkerboard calibration pattern for telecentric lens with certificate
PT260-310-P
Calibration pattern
Request a quote
Add this product to the quote request list.