Reading of petri dishes in cell culture
Opto Engineering® bi-telecentric lenses are the ideal solution for fully automated cell culture procedures ensuring exceptional fidelity and precision: it is no coincidence that Nobel Prize Dr. Shinya Yamanaka used TC series lenses in his IPS (Induced Pluripotent Stem cells) research.
See also
ITALA® cameras: precise rotors and stators inspection
Delta Visione has developed an offline system for the 360° inspection and measurement of a precision mechanical apparatus consisting of a rotating rotor and stator performing up to 160 measurements in a single inspection with an accuracy of 0.02 mm.
ITALA® cameras: Robots eyes in remote inspection systems
AUT integrates Opto Engineering® ITALA® cameras and optics on its robots for Non-Destructive Testing (NDT) and Evaluation of critical infrastructures in the Oil and Gas, Aerospace and Nuclear industries.
ITALA® cameras for quality control of metal turned components
AML designed a vision system featuring a rotary glass table where cylindrical metal components are measured and inspected at the maximum speed of 30.000 pieces per hour. The parts feature diameter and height dimensions between 3 mm and 50 mm.
ITALA® cameras for quality control of courtesy light projector modules
The automotive industry is arguably the most traditionally associated with machine vision, with a wide range of possible applications. Today, electronics has penetrated virtually every field, and automotive is no exception: in this application case, ITALA® cameras from Opto Engineering® are used for quality control of courtesy light projector modules.
ITALA® G cameras for high-speed check of injector nozzles
Injector nozzles are widely used in the automotive industry and are subjects to different types of inspection, as they undergo both measurement and surface checks. In addition, data matrix reading is often performed for traceability purposes. For these reasons, a double type of inspection with a different set of hardware is usually required: a backlight configuration for measurement and a front-light configuration for surface inspection and data matrix reading.