Specifications
EMVA 1288 Data
Downloads
Compatible products
| Sensor specifications | ||
| Megapixel | 12.3 | |
| Resolution | 4112 x 3008 | |
| Sensor format | 1.1" | |
| Active area | (mm) | 17.6 |
| Pixel size | (μm) | 3.45 |
| Sensor model | IMX304 | |
| Sensor type | CMOS | |
| Shutter | Global | |
| Chroma | Color | |
| Camera specifications | ||
| Filter | IR cut | |
| Frame rate | (fps) | 3.2 |
| Burst frame rate | (fps) | 15.1 |
| Exposure time | 1.51 μs - 10 s | |
| ADC resolution | (bit) | 10/12 |
| Dynamic range | (dB) | 70.0 |
| Gain range | (dB) | 0-48 |
| SNR | (dB) | 40.2 |
| Image buffer | (MB) | 384 |
| Image processing | Binning, decimation, ROI, gamma, black level, LUT, defective pixel correction, white balance, color corection matrix | |
| Pixel formats | Mono 8/10/12, RGB8, Bayer GR 8/10p/10Packed/12p/12Packed, YUV 422Packed | |
| Chunk data | yes | |
| User sets | 3 | |
| Timers/Counters | 2/4 | |
| Synchronization | Free run, software trigger, hardware trigger, PTP (IEEE 1588) | |
| Connectivity and electrical specifications | ||
| Data connector | RJ45 | |
| Data interface | 1 GigE | |
| I/O connector | 12-pin Hirose | |
| I/O interface | 2x opto-isolated input, 4x opto-isolated output | |
| Serial interface | RS232, RS485 | |
| Liquid lens controller | no | |
| Encoder interface | yes, incremental | |
| Power supply | (V) | 12-24, PoE (IEEE 802.3af class 2) |
| Max power consumption (1) | (W) | 4.0 |
| Compliance and reliability | ||
| Standards | GigE Vision 2.x, GenICam, GenTL | |
| Client software | ITALA View or other GigE Vision 2.x software | |
| Operating systems | 64-bit Windows 10/11 | |
| Shock and vibrations (2) | n.a. | |
| Warranty | (years) | 5 |
| Mechanical specifications | ||
| Mount | C | |
| Dimensions | (mm) | 40.5 x 40.5 x 51.2 |
| Clamping system | 16x M3 threaded holes (on all sides) | |
| Mass | (g) | 142 |
| Environmental specifications | ||
| Operating temperature (3) | (°C ) | -25 - +65 |
| Storage temperature (4) | (°C ) | -10 - +60 |
| Operating relative humidity | (%) | 20-80, non condensing |
| IP rating | IP30 | |
Last update 27 Mar 2023
Notes
- Measured with 24V power supply
- To be measured after pre-series production
- Case temperature, measured on the front part of the camera body
- Ambient temperature
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
| EMVA1288 Data | ||
| Quantum efficiency | (%) | 53.6 |
| System gain | (DN/e-) | 0.4 |
| SNR | (dB) | 40.1 |
| Dynamic range | (dB) | 70.1 |
| Sensitivity threshold | (e-) | 5.5 |
| Saturation capacity | (e-) | 10313 |
| Dark current | (e-/s) | 8.5 |
| Temporal Dark Noise | (e-) | 5.5 |
| Dark Signal Non-Uniformity (DSNU) | (e-) | 1.1 |
| Photo Response Non-Uniformity (PRNU) | (%) | 0.7 |
| Linearity Error | (%) | -0.53 / 0.75 |
Last update 27 Mar 2023
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
TC3MHR016-C
High resolution telecentric lens for 1.1" sensors, magnification 0.850x, C mount
TC3MHR024-C
High resolution telecentric lens for 1.1" sensors, magnification 0.564x, C mount
TC3MHR036-C
High resolution telecentric lens for 1.1" sensors, magnification 0.392x, C mount
TC3MHR048-C
High resolution telecentric lens for 1.1" sensors, magnification 0.303x, C mount
TC3MHR056-C
High resolution telecentric lens for 1.1" sensors, magnification 0.259x, C mount
TC3MHR064-C
High resolution telecentric lens for 1.1" sensors, magnification 0.227x, C mount
TC3MHR080-C
High resolution telecentric lens for 1.1" sensors, magnification 0.182x, C mount
TC3MHR096-C
High resolution telecentric lens for 1.1" sensors, magnification 0.153x, C mount
TC3MHR120-C
High resolution telecentric lens for 1.1" sensors, magnification 0.118x, C mount
TC3MHR144-C
High resolution telecentric lens for 1.1" sensors, magnification 0.100x, C mount
TC3MHR192-C
High resolution telecentric lens for 1.1" sensors, magnification 0.075x, C mount
TC3MHR240-C
High resolution telecentric lens for 1.1" sensors, magnification 0.059x, C mount
TCCR3M048-C
Telecentric CORE lens for 1.1" sensors, magnification 0.303x, C mount, WD 132.9 mm
TCCR3M056-C
Telecentric CORE lens for 1.1" sensors, magnification 0.259x, C mount, WD 157.8 mm
TCCR3M064-C
Telecentric CORE lens for 1.1" sensors, magnification 0.227x, C mount, WD 181.9 mm
TCCR3M080-C
Telecentric CORE lens for 1.1" sensors, magnification 0.182x, C mount, WD 226.8 mm
TCCR3M096-C
Telecentric CORE lens for 1.1" sensors, magnification 0.153x, C mount, WD 278.6 mm
TCCR3M120-C
Telecentric CORE lens for 1.1" sensors, magnification 0.118x, C mount, WD 334.6 mm
TCCP3MHR144-C
Ultra compact bi-telecentric lens for matrix detectors up to 1.1″, magnification 0.086x
TCCP3MHR192-C
Ultra compact bi-telecentric lens for matrix detectors up to 1.1″, magnification 0.064x
TCCP3MHR260-C
Ultra compact bi-telecentric lens for matrix detectors up to 1.1″, magnification 0.053x
MCSM1-01X
Variable macro lens with Scheimpflug adjustment
RT-POE15M-1AFE-R
15.4W Single Port Power-over-Ethernet IEEE802.3af Power Injector
Request a quote
Add this product to the quote request list.
Product images
