Opto Engineering® - 20 years
Home Lighting LTBRZ3 series
LTBRZ3-P-R-BL-PV-DC
Specifications
Downloads
Compatible products
Lighting specifications
Illumination area width (mm) 295
Illumination area height (mm) 25
Emission angle (deg) backlight
Number of LEDs 12
Light color, peak wavelength red, 630 nm
Spectral FWHM (nm) 20
Illuminance (1) (klux) n.a.
Irradiance (1) (W/m2) -
Diffuser yes
Polarization film vertical
Electrical specifications
Supply voltage (2) (V) 24
Peak power consumption (W) 100
Operating mode Strobe
Daisy-chain yes
Max continuous current (A) -
Max pulse current (A) 4
Minimum Ton (μs) 8
Maximum Ton (ms) 10
Max duty-cycle (%) 10
Max frequency (Hz) 1000
Input connector M12, 5 pins, male
Output connector M12, 5 pins, female
Cables (3) CBLT020, CBLT021
Mechanical specifications
Width (mm) 307
Height (mm) 66
Thickness (mm) 33
Mass (g) 400
Clamping system 4x ø5 holes
Environmental specifications
Operating temperature (°C) 0-40
Storage temperature (°C) 0-50
Operating relative humidity (%) 20-85, non condensing
IP rating IP40
Installation Indoor use only
Eye safety
Risk group according to CEI EN 62471:2010 Exempt

Last update 18 Apr 2024

CE
ROHS
REACH
WEEE
UKCA

Notes

  1. Measured at 200 mm for models with lenses. Measured at emitting surface for backlight models.
  2. Tolerance ± 5%.
  3. Not included. Must be ordered separately.

Ordering information

Our part numbers are coded as LTBRZ3-x-y-w-p-e, where:

x Defines the operation mode of the barlight
C means continuous mode only
P means pulsed mode only
y Defines the colour
R is Red, 630 nm
G is Green, 530 nm
B is Blue, 470 nm
W is white, 6500K colour temperature
IR is Infrared, 850nm
w defines the beam angle:
10 means that each LED emits a circular beam with an aperture of ~10°
20 means that each LED emits a circular beam with an aperture of ~20°
30 means that each LED emits a circular beam with an aperture of ~30°
50 means that each LED emits a circular beam with an aperture of ~50°
EL means that each LED emits an elliptical beam with an horizontal aperture of ~35° and a vertical aperture of ~15°
BL means that LEDs emit a uniform pattern suitable for backlight applications
p defines the presence of a polarizing film
PH means that the polarizing axis of the film is parallel to the width of the illuminator
PV means that the polarizing axis of the film is parallel to the height of the illuminator
Leave this field empty if the polarizer is not required
e defines the presence of a daisy chain connector
Leave this field empty if the daisy-chain is not required
For additional options, such as wavelenghts, optical, electronical or mechanical customization, contact us.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

LTBRZ3 Series Manual

Datasheet

Download datasheet

Layout files

DXF
IGS
PDF
STEP
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
CBLT series
CBLT series
Cables for LED illuminators
CBLT020
Illumination cable PVC yellow, side 1 M12 female connector straight, side 2 cable end, 5 ways, 5m length, high current
CBLT021
Illumination cable PVC yellow, side 1 M12 male connector straight, side 2 M12 female connector straight, 5 ways, 1m length, high current
Request a quote
Add this product to the quote request list.