Optical specifications
Beam diameter	(mm)	30
Working distance range	(mm)	45 - 90
Light color, peak wavelength (1)		blue, 460 nm
Mechanical specifications
Length (2)	(mm)	124.7
Outer diameter	(mm)	44
Mass	(g)	284
Electrical specifications
Device power ratings
DC voltage minimum (3)	(V)	12
DC voltage maximum (3)	(V)	24
Power consumption	(W)	< 2.5
Max LED forward current (4)	(mA)	350
Cables		CB244P1500 included
LED power ratings
Forward voltage (typical) (5)	(V)	3.3
Forward voltage (max) (5)	(V)	4.00
Max pulse current (6)	(mA)	2000
Eye safety
Risk group according to CEI EN 62471:2010		Risk group 2

Last update: 2021-06-22

Notes

Opto Engineering® recommends green light for high precision measurement applications
Nominal value, with no spacers in place
Tolerance ± 10%
Used in continuous (not pulsed) mode
At max forward current. Tolerance is ±0.06V on forward voltage measurements
At pulse width <= 10 ms, duty cycle <= 10% condition. Built-in electronics board must be bypassed (see tech info)

Connection

Device side - male pins
Front view

Pinout reference

Pin: Function

1: Earth
2: GND
3: LED Anode
4: Power supply (+12÷24 V)

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

Compatible products

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.

TC telecentric lens for matrix detectors

TC series

Bi-telecentric lenses for sensors up to 2/3”

+ View all products

TC13024	Bi-telecentric lens for 1/3″ detectors, magnification 0.192 ×, C-mount
TC12024	Bi-telecentric lens for 1/2″ detectors, magnification 0.255 x, C-mount
TC23024	Bi-telecentric lens for 2/3″ detectors, magnification 0.350 x, C-mount

High-resolution telecentric lens for large detectors

TC1MHR-TC4MHR series

Telecentric lenses for sensors up to 4/3”

+ View all products

TC1MHR024‑C	High resolution telecentric lens for 1/1.2" detectors, magnification 0.424x, C-mount
TC2MHR024‑C	High resolution telecentric lens for 1″ detectors, magnification 0.508x, C-mount
TC2MHR024‑F	High resolution telecentric lens for 1″ detectors, magnification 0.508x, F-mount
TC2MHR024‑E	High resolution telecentric lens for 1″ detectors, magnification 0.508x, mount M42X1 FD=16
TC3MHR024‑C	High resolution telecentric lens for 1.1” detectors, magnification 0.564x, C-mount
TC4MHR024‑C	High resolution telecentric lens for 4/3″ detectors, magnification 0.700x, C-mount
TC4MHR024‑F	High resolution telecentric lens for 4/3″ detectors, magnification 0.700x, F-mount
TC4MHR024‑E	High resolution telecentric lens for 4/3″ detectors, magnification 0.700x, mount M42X1 FD=16

TC16M telecentric lens for very large detectors

TC16M series

Telecentric lenses for sensors up to 43.3 mm and 8k line scan cameras

+ View all products

TC16M009	Telecentric lens for 35 mm detectors, magnification 4.000 x, F-mount
TC16M009‑Q	Telecentric lens for 35 mm detectors, magnification 4.000 x, mount M58x0.75 FD = 6.56
TC16M012	Telecentric lens for 35 mm detectors, magnification 3.000 x, F-mount
TC16M012‑Q	Telecentric lens for 35 mm detectors, magnification 3.000 x, mount M58x0.75 FD =6.56
TC16M018	Telecentric lens for 35 mm detectors, magnification 2.000 x, F-mount
TC16M018‑Q	Telecentric lens for 35 mm detectors, magnification 2.000 x, mount M58x0.75 FD =6.56

TC12M High resolution telecentric lenses for up APS-H sensors

TC12M series

Telecentric lenses for sensors up to APS-H and 4k line scan cameras

+ View all products

TC12M024‑F

High resolution telecentric lenses, magnification 1.208, WD 66.7, F mount

Accessories

Accessories and add-ons to make the most of Opto Engineering^® lenses.

+ View all products

LED1W‑B	Replacement LED source, blue
	Diffuser cap for LTCLHP illuminators

CMHO series

Clamping mechanics for lenses

+ View all products

CMHO024

Clamping mechanics for TCxx024 lenses and LTCLHP024-X illuminators

LTSCHP series

High-performance replacement LED modules

+ View all products

LTSCHP1W‑B

Replacement LED module, blue

PS series

Power supplies

+ View all products

RT‑SDR‑120‑24

24VDC DIN rail power supply

CB series

Cables

+ View all products

CB244P1500	Power cable, side 1 M8 connector straight, side 2 cable end - 2 m - type 1 labels
CB244P1500L	Power cable, side 1 M8 connector angled, side 2 cable end - 2 m - type 1 labels

LTIC series

LED lighting controllers

+ View all products

LTIC1CH‑A1‑4	Analogue lighting controller unit, 4A, 24V
LTIC1CH‑D1‑4	Digital lighting controller unit, 4A, 24V
LTICOBUL1000CH1‑24VUSTB	24VDC analog lighting controller 1 channel, UK power cord, Illumination cable, side A SM 3 way male connector, side B terminal blocks connector, 24V - 3m
LTICOBUL1000CH1‑24VEUTB	24VDC analog lighting controller 1 channel, UK power cord, Illumination cable, side A SM 3 way male connector, side B terminal blocks connector, 24V - 3m
LTICOBUL1000CH1‑24VUKTB	24VDC analog lighting controller 1 channel, UK power cord, Illumination cable, side A SM 3 way male connector, side B terminal blocks connector, 24V - 3m

Company & Resources

Optical imaging technologies OE for the future Who we are A history of innovation Committed to quality Joint ventures Where we are Legal Product awards Corporate videos 2D and 3D models Image gallery Video gallery Search OE products by applications Application notes Basics Frequently asked questions Press Review Jobs at Opto Engineering^®

Fiscal code and registration number at Mantova Business Register 02011230204, Nr. REA: MN-216669, Share Capital: 200.000,00 €
Design & development by Opto Engineering® → SEO and consulting by Dipiemme Studio

Company & Resources

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT

Company & Resources

Follow us

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT