Opto Engineering® - 20 years
Home Optics Macro & Fixed focal length lenses
MCSM1-01X
Overview
Models
Downloads
Related
Tech Info
Resources
Magnification
0.1 - 1 x
Macro

Key advantages

  • Precision Scheimpflug mount
    Image focus is retained across any tilted plane.
  • Compatible with any C-mount cameras
    The back focal length meets the C-mount standard.
  • Application flexibility
    Supports a wide range of magnification factors and angles of view.
Discover more
Please wait
Unable to process your request
Back to models
Filters
Close
Reset Filters
Select 2 or more models to compare specs
Start comparing
Clear selection

Last update 18 Jan 2024

Expand table

Notes

  1. Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion.
  2. Working f-number (wf/N): the real f-number of a lens in operating conditions.
  3. Measured from the front end of the mechanics to the camera flange.
Back to models

Technical documents

Product user guide
MCSM instructions

MCSM Macro setup

MCSM Macro setup

Setting-up the Scheimpflug mount is easy. First screw the lens into the camera C-mount, just like with any common lens. Loosen the lens C-mount adaptor by unscrewing the set-screws. Tune the lens phase to the right position, then tighten the set-screws.

Mount the lens to a secure fixture by means of the threaded holes. Once the lens is mounted, adjust the focus until the image at the centre of the detector is sharp; you don’t need to tilt the detector yet.

With the lens mounted and well focused, adjust the tilt control on the side of the Scheimpflug mount by means of a screwdriver. It might be required to perform a second fine focusing of the lens to achieve the perfect setting. Once the Scheimpflug angle is set, lock the mount in place by tightening the lateral set-screws.