Company

Service

Resources

Basics

F.A.Q.

Support

Careers

Press Review

Optics

Lighting

Cameras

Software

Accessories

AI Vision Units

TC23172

Bi-telecentric lens for 2/3″ detectors, magnification 0.051 x, C-mount

Prev Next

Specifications

Magnification	(×)	0.051
Image circle Ø	(mm)	11.0
Object field of view (8)
with 1/3″ detector (4.8 x 3.6 mm)	(mm × mm)	94.12 x 70.59
with 1/2.5″ detector (5.70 x 4.28 mm)	(mm × mm)	111.76 x 83.92
with 1/2″ detector (6.4 x 4.8 mm)	(mm × mm)	125.49 x 94.12
with 1/1.8″ detector (7.13 x 5.37 mm) (7)	(mm × mm)	139.80 x 104.51
with 2/3″ - 5 MP detector (8.45 x 7.07 mm)	(mm × mm)	166.67 x 139.02
Optical specifications
Working distance (1)	(mm)	526.9
wF/# (2)		8
Telecentricity typical (max) (3)	(deg)	< 0.05 (0.08)
Distortion typical (max) (4)	(%)	< 0.04 (0.10)
Field depth (5)	(mm)	260
CTF @ 70 lp/mm	(%)	> 40
Dimensions
Mount		C
Phase Adjustment (9)		Yes
Length (6)	(mm)	630.3
Diameter	(mm)	260
Mass	(g)	11400

Notes

Working distance: distance between the front end of the mechanics and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion.
Working F-number (higher wF/#): the real F-number of a lens when used as a macro. Lenses with smaller apertures can be supplied on request.
Maximum slope of chief rays inside the lens: when converted to millirad, it gives the maximum measurement error for any millimeter of object displacement. Typical (average production) values and maximum (guaranteed) values are listed.
Percent deviation of the real image compared to an ideal, undistorted image: typical (average production) values and maximum (guaranteed) values are listed.
At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 5.5 μm.
Measured from the front end of the mechanics to the camera flange.
With 1/1.8″ (8.9 mm diagonal) detectors, the FOV of TC12yyy lenses may show some vignetting at the image corners, as these lenses are optimized for 1/2" detectors (8 mm diagonal).
For the fields with the indication "Ø =", the image of a circular object of such diameter is fully inscribed into the detector.
Indicates the availability of an integrated camera phase adjustment feature. If missing, it can be supplied upon request (except for TC23004, TC23007,TC23009, TC23012).

Dimensions

footprint

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

new version with phase regulation

Request a quote

Simply fill in the form below to receive a quote or to request further info about this product: a sales engineer will get back to you within 24 hours.

* Please note: all fields are required.

First name

Last name

Job description

Company

Address

City

ZIP code

Phone

Country

State/Zone/Department

Your message

* After submit we'll ask you to check your consense to use Your data

E-mail

Please, insert a valid E-mail and accept conditions.

: With this you authorize the treatment of your personal data and give us a consense to contact you in order to work on your commercial requests and to be able to send you our best offers to cover your needs. For more details, please, read here(MANDATORY)
: With this you authorize the treatment of your personal data and give us a consense to contact you and send you email newsletters about products, sales, events, company announcements and to be able to send you our best offers to cover your needs. Newsletter are sent (roughly) twice a month. We will NOT spam or abuse your email in any way. For more details, please, read here(OPTIONAL)
: With this you authorize the treatment of your personal data and give us a consense to contact you and send you our product catalog by traditional mail (every two years). For more details, please, read here(OPTIONAL)

Compatible products

LTCLHP series

High-performance telecentric illuminators

+ click to view all

LTCLHP192‑R	Telecentric HP illuminator, beam diameter 250 mm, red
LTCLHP192‑G	Telecentric HP illuminator, beam diameter 250 mm, green
LTCLHP192‑W	Telecentric HP illuminator, beam diameter 250 mm, white

LTBC series

Continuos LED backlight

+ click to view all

LTBC234234‑W	Continuos LED backlight, 234x234 illumination area, white
LTBC234234‑G	Continuos LED backlight, 234x234 illumination area, green

CMHO series

Clamping mechanics

+ click to view all

CMHO192R

Clamping mechanics for TCxx192 lenses and LTCLHP192-X illuminators rotation type

PTTC, PTCP series

Accurate calibration of machine vision systems

+ click to view all

PT120‑240

Calibration pattern

Accessories

Accessories and add-ons to make the most of Opto Engineering lenses.

+ click to view all

TCFILTER

Filter mount for telecentric lenses

LTPR series

LED patterns projectors

+ click to view all

LTPRHP3W‑W	LED pattern projector 3W, HP, white
LTPRHP3W‑R	LED pattern projector 3W, HP, red
LTPRHP3W‑G	LED pattern projector 3W, HP, green
LTPRHP3W‑B	LED pattern projector 3W, HP, blue
LTPRUP‑W	90W strobed LED pattern projector white
LTPRUP‑R	90W strobed LED pattern projector red
LTPRUP‑G	90W strobed LED pattern projector green
LTPRUP‑B	90W strobed LED pattern projector blue

Design & development by Opto Engineering → SEO and consulting by Dipiemme Studio