Optics finder Lighting finder Camera finder Imaging lens selector

Get the right product, right from the start

TC13144

Bi-telecentric lens for 1/3″ sensors, magnification 0.033 x, C-mount

← Prev Next →

Specifications

Main optical specifications
Magnification	(x)	0.033
Image circle diameter	(mm)	6.0
Max sensor size		1/3″
Object field of view
1/3” (1)	(mm × mm)	145.45 x 109.09
1/2.5” (1)	(mm × mm)	ø = 129.70
1/2” (1)	(mm × mm)	ø = 145.45
1/1.8” (1)	(mm × mm)	ø = 161.52
2/3” (1)	(mm × mm)	ø = 181.82
Advanced optical specifications
Working distance (2)	(mm)	396.0
Working ƒ/N (3)		8
Telecentricity typical (max) (4)	(deg)	< 0.05 (0.08)
Distortion typical (max) (5)	(%)	< 0.04 (0.10)
Field depth (6)	(mm)	380.20
Mechanical specifications
Mount		C
Phase adjustment (8)		Yes
Length (9)	(mm)	448.8
Front diameter	(mm)	200
Mass	(g)	5779

Last update: 06 May 2022

Notes

Object field of view (mm x mm). For the fields with the indication "Ø =", the image of a circular object of such diameter is fully inscribed into the detector.
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion.
Working f-number (wf/N): the real f-number of a lens in operating conditions.
Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm.
Object side, calculated with the Rayleigh criterion with λ= 520 nm
If not available, phase adjustment can be supplied upon request (except for TC23004, TC23007,TC23009, TC23012).
Measured from the front end of the mechanics to the camera flange.

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

pdf dxf igs step sldprt

Compatible products

LTBC series

Continuous LED backlight

+ View all products

LTBC234234‑W	Continuos LED backlight, 234.5x235.5 mm illumination area, white, 6300 K
LTBC234234‑G	Continuos LED backlight, 234.5x234.5 mm illumination area, green, 525 nm

LTCLHP series

High-performance telecentric illuminators

+ View all products

LTCLHP144‑R	Telecentric HP illuminator, beam diameter 180 mm, red, 625 nm
LTCLHP144‑G	Telecentric HP illuminator, beam diameter 180 mm, green, 525 nm

LTRNST series

LED ring illuminators - straight type

+ View all products

LTRN144RD	Ring LED illuminator, inner diameter 200.0 mm, straight type, red, 630 nm
LTRN144GR	Ring LED illuminator, inner diameter 200.0 mm, straight type, green, 525 nm
LTRN144BL	Ring LED illuminator, inner diameter 200.0 mm, straight type, blue, 470 nm
LTRN144NW	Ring LED illuminator, inner diameter 200.0 mm, straight type, white, 6300 K

LTBRDC series

Continuous LED bar lights

+ View all products

LTZPFL200‑00‑6‑R‑24V	LED bar light, 6 LED rows, 200x26.3 illumination area, red, 630 nm, 24V
LTZPFL200‑00‑6‑G‑24V	LED bar light, 6 LED rows, 200x26.3 illumination area, green, 525 nm, 24V
LTZPFL200‑00‑6‑B‑24V	LED bar light, 6 LED rows, 200x26.3 illumination area, blue, 470 nm, 24V
LTZPFL200‑00‑6‑W‑24V	LED bar light, 6 LED rows, 200x26.3 illumination area, white, 6300 K, 24V

LTPRHP3W series

3W LED pattern projectors

+ View all products

LTPRHP3W‑W	LED pattern projector 3W, white, 6000 K
LTPRHP3W‑R	LED pattern projector 3W, red, 625 nm
LTPRHP3W‑G	LED pattern projector 3W, green, 525 nm
LTPRHP3W‑B	LED pattern projector 3W, blue, 460 nm

LTPRUP series

90W strobe LED pattern projectors

+ View all products

LTPRUP‑W	90W strobed LED pattern projector, white, 6000 K
LTPRUP‑R	90W strobed LED pattern projector, red, 625 nm
LTPRUP‑G	90W strobed LED pattern projector, green, 525 nm
LTPRUP‑B	90W strobed LED pattern projector, blue, 460 nm

PTTC, PTCP series

Accurate calibration patterns for machine vision

+ View all products

PT120‑240	Calibration pattern
PT120‑144	Calibration pattern
PT120‑144‑C	Checkerboard calibration pattern for telecentric lens with certificate

mvBlueCOUGAR series

GigE / Dual GigE cameras with Smart Features

+ View all products

RT‑mvBC‑X100w	Camera with interface , sensor size , MP, resolution , sensor name , sensor type
	Camera with interface 1 GigE, sensor size 1/1.8", 3.2 MP, resolution 2064 x 1544, sensor name IMX265, sensor type CMOS
	Camera with interface Dual GigE, sensor size 1/1.8", 3.2 MP, resolution 2064 x 1544, sensor name IMX252, sensor type CMOS
	Camera with interface Dual GigE, sensor size 2/3", 5.1 MP, resolution 2464 x 2056, sensor name IMX250, sensor type CMOS

COE-U series

GenICam® C-mount USB3 cameras

+ View all products

COE‑003‑M‑USB‑010‑IR‑C	Area scan camera , , shutter, , MP, μm, , , fps, , C-mount,
COE‑003‑C‑USB‑010‑IR‑C	Area scan camera , , shutter, , MP, μm, , , fps, , C-mount,

CMHO series

Clamping mechanics for lenses

+ View all products

CMHO144

Clamping mechanics for TCxx130, TCxx144 lenses and LTCLHP144-X illuminators

Company & Resources

Optical imaging technologies Opto Engineering® for the environment Who we are A history of innovation Committed to quality Joint ventures Where we are Legal Awards Corporate videos 2D and 3D models Image gallery Video gallery Search OE products by applications Basics Frequently asked questions Press Review Jobs at Opto Engineering^®

Fiscal code and registration number at Mantova Business Register 02011230204, Nr. REA: MN-216669, Share Capital: 200.000,00 €
Design & development by Opto Engineering® → SEO and consulting by Dipiemme Studio

沪ICP备12040578号-2

Company & Resources

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT

Company & Resources

Follow us

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT