Optical specifications
Magnification	(×)	0.044
Image circle Ø	(mm)	8.0
Max detector size		1/2"
Working distance (1)	(mm)	396.0
wF/# (2)		8
Telecentricity typical (max) (3)	(deg)	< 0.05 (0.08)
Distortion typical (max) (4)	(%)	< 0.05 (0.08)
Field depth (5)	(mm)	339
CTF @ 70 lp/mm	(%)	> 35
Object field of view (6)
with 1/3″ detector (4.8 x 3.6 mm)	(mm × mm)	109.09 x 81.82
with 1/2.5″ detector (5.70 x 4.28 mm)	(mm × mm)	129.55 x 97.27
with 1/2″ detector (6.4 x 4.8 mm)	(mm × mm)	145.45 x 109.09
with 1/1.8″ detector (7.13 x 5.33 mm)	(mm × mm)	162.05 x 121.14
with 2/3″ - 5 MP detector (8.50 x 7.09 mm)	(mm × mm)	ø = 161.10
Dimensions
Mount		C
Phase adjustment (7)		Yes
Length (8)	(mm)	462.1
Diameter	(mm)	200
Mass	(g)	5793

Last update: 2021-06-22

Notes

Working distance: distance between the front end of the mechanics and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion.
Working F-number (wF/#): the real F-number of a lens in operating conditions.
Maximum angle between chief rays and optical axis on the object side.
Percent deviation of the real image compared to an ideal, undistorted image: typical (average production) values and maximum (guaranteed) values are listed.
At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 5.5 μm.
For the fields with the indication "Ø =", the image of a circular object of such diameter is fully inscribed into the detector.
If not available, phase adjustment can be supplied upon request (except for TC23004, TC23007,TC23009, TC23012).
Measured from the front end of the mechanics to the camera flange.

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

new version with phase regulation

Compatible products

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.

LTBC series

Continuous LED backlight

+ View all products

LTBC234234‑W	Continuos LED backlight, 234x234 illumination area, white
LTBC234234‑G	Continuos LED backlight, 234x234 illumination area, green

LTCLHP series

High-performance telecentric illuminators

+ View all products

LTCLHP144‑R	Telecentric HP illuminator, beam diameter 180 mm, red
LTCLHP144‑G	Telecentric HP illuminator, beam diameter 180 mm, green

LTRNST series

LED ring illuminators - straight type

+ View all products

LTRN144RD	Ring LED illuminator, inner diameter 200 mm, straight type, red 630 nm
LTRN144GR	Ring LED illuminator, inner diameter 200 mm, straight type, green 525 nm
LTRN144BL	Ring LED illuminator, inner diameter 200 mm, straight type, blue 470 nm
LTRN144NW	Ring LED illuminator, inner diameter 200 mm, straight type, white

LTBRDC series

Continuous LED bar lights

+ View all products

LTZPFL200‑00‑6‑R‑24V	LED bar light, 6 LED rows, 200X26.3 illumination area, red, 24V
LTZPFL200‑00‑6‑G‑24V	LED bar light, 6 LED rows, 200X26.3 illumination area, green, 24V
LTZPFL200‑00‑6‑B‑24V	LED bar light, 6 LED rows, 200X26.3 illumination area, blue, 24V
LTZPFL200‑00‑6‑W‑24V	LED bar light, 6 LED rows, 200X26.3 illumination area, white, 24V

LTPR series

LED patterns projectors

+ View all products

LTPRHP3W‑W	LED pattern projector 3W, HP, white
LTPRHP3W‑R	LED pattern projector 3W, HP, red
LTPRHP3W‑G	LED pattern projector 3W, HP, green
LTPRHP3W‑B	LED pattern projector 3W, HP, blue
LTPRUP‑W	90W strobed LED pattern projector white
LTPRUP‑R	90W strobed LED pattern projector red
LTPRUP‑G	90W strobed LED pattern projector green
LTPRUP‑B	90W strobed LED pattern projector blue

PTTC, PTCP series

Accurate calibration patterns for machine vision

+ View all products

PT120‑240	Calibration pattern
PT120‑144	Checkerboard calibration pattern, chrome-on-glass photomask, active area 170x140 mm
PT120‑144‑C	Checkerboard calibration pattern with certificate, chrome-on-glass photomask, active area 170x140 mm

COE-G series

GenICam® PoE C-mount cameras

+ View all products

COE‑013‑M‑POE‑030‑IR‑C	Area Scan camera PYTHON 1300, CMOS, Global shutter, 1280 x 1024, 1.3 MP, 4.8 pix, 1/2", Gray, 90 fps, GigE, POE, C - mount, Glass filter
COE‑013‑C‑POE‑030‑IR‑C	Area Scan camera PYTHON 1300, CMOS, Global shutter, 1280 x 1024, 1.3 MP, 4.8 pix, 1/2", Color, 90 fps, GigE, POE, C - mount, Infrared cut filter
COE‑032‑M‑POE‑040‑IR‑C	Area Scan camera IMX265, CMOS, Global shutter, 2048 x 1536, 3.1 MP, 3.45 pix, 1/1.8", Gray, 37.5 fps, GigE, POE, C - mount, Glass filter
COE‑032‑C‑POE‑040‑IR‑C	Area Scan camera IMX265, CMOS, Global shutter, 2048 x 1536, 3.1 MP, 3.45 pix, 1/1.8", Color, 37.5 fps, GigE, POE, C - mount, Infrared cut filter
COE‑050‑M‑POE‑023‑IR‑C	Area Scan camera MT9P031, CMOS, Rolling shutter, 2592 x 1944, 5 MP, 2.2 pix, 1/2.5", Gray, 14 fps, GigE, POE, C - mount, Glass filter
COE‑106‑M‑POE‑031‑IR‑C‑2	Area Scan camera MT9J003, CMOS, Rolling shutter, 3840 x 2748, 10.6 MP, 1.67 pix, 1/2.3", Gray, 11 fps, GigE, POE, C - mount, Glass filter
COE‑106‑C‑POE‑031‑IR‑C	Area Scan camera MT9J003, CMOS, Global shutter, 3840 x 2748, 10.6 MP, 1.67 pix, 1/2.3", Color, 7 fps, GigE, POE, C - mount, Infrared cut filter
COE‑063‑M‑POE‑040‑IR‑C‑B	Area Scan camera IMX178, CMOS, Rolling shutter, 3072 x 2048, 6.3 MP, 2.4 pix, 1/1.8", Gray, 17 fps, GigE, POE, C - mount, Glass filter
COE‑063‑C‑POE‑040‑IR‑C	Area Scan camera IMX178, CMOS, Rolling shutter, 3072 x 2048, 6.3 MP, 2.4 pix, 1/1.8", Color, 17 fps, GigE, POE, C - mount, Infrared cut filter

mvBlueCOUGAR series

GigE / Dual GigE cameras with Smart Features

+ View all products

RT‑mvBC‑X100f	Camera with interface GigE (1GB/s), sensor size 1/2.9", mpixel 0.4, resolution 728 x 544, sensor name IMX287, sensor type CMOS
RT‑mvBC‑X102f	Camera with interface GigE (1GB/s), sensor size 1/2.9", mpixel 1.58, resolution 1456 x 1088, sensor name IMX273, sensor type CMOS
RT‑mvBC‑XD102f	Camera with interface Dual GigE (2GB/s), sensor size 1/2.9", mpixel 1.58, resolution 1456 x 1088, sensor name IMX273, sensor type CMOS
RT‑mvBC‑X104i	Camera with interface GigE (1GB/s), sensor size 1/1.8", mpixel 3.19, resolution 2064 x 1544, sensor name IMX265, sensor type CMOS
RT‑mvBC‑XD104h	Camera with interface Dual GigE (2GB/s), sensor size 1/1.8", mpixel 3.19, resolution 2064 x 1544, sensor name IMX252, sensor type CMOS
RT‑mvBC‑X105	Camera with interface GigE (1GB/s), sensor size 1/2.5", mpixel 5.04, resolution 2592 x 1944, sensor name MT9P031, sensor type CMOS
RT‑mvBC‑X1010	Camera with interface GigE (1GB/s), sensor size 1/2.3", mpixel 10.66, resolution 3856 x 2764, sensor name MT9J003, sensor type CMOS

COE-U series

GenICam® C-mount USB3 cameras

+ View all products

COE‑013‑M‑USB‑030‑IR‑C	Area Scan camera PYTHON 1300, CMOS, Global shutter, 1280 x 1024, 1.3 MP, 4.8 pix, 1/2", Gray, 210 fps, USB 3.0, C - mount, Glass filter
COE‑013‑C‑USB‑030‑IR‑C	Area Scan camera PYTHON 1300, CMOS, Global shutter, 1280 x 1024, 1.3 MP, 4.8 pix, 1/2", Color, 90 fps, USB 3.0, C - mount, Infrared cut filter
COE‑050‑C‑USB‑023‑IR‑C	Area Scan camera AR0521, CMOS, Rolling shutter, 2592 x 1944, 5 MP, 2.2 pix, 1/2.5", Color, 31 fps, USB 3.0, C - mount, Infrared cut filter
COE‑016‑M‑USB‑021‑IR‑C	Area Scan camera IMX273, CMOS, Global shutter, 1440 x 1080, 1.6 MP, 3.45 pix, 1/2.9", Gray, 165 fps, USB 3.0, C - mount, Glass filter
COE‑016‑C‑USB‑021‑IR‑C	Area Scan camera IMX273, CMOS, Global shutter, 1440 x 1080, 1.6 MP, 3.45 pix, 1/2.9", Color, 165 fps, USB 3.0, C - mount, Infrared cut filter
COE‑063‑M‑USB‑040‑IR‑C	Area Scan camera IMX178, CMOS, Rolling shutter, 3072 x 2048, 6.3 MP, 2.4 pix, 1/1.8", Gray, 42 fps, USB 3.0, C - mount, Glass filter
COE‑063‑C‑USB‑040‑IR‑C	Area Scan camera IMX178, CMOS, Rolling shutter, 3072 x 2048, 6.3 MP, 2.4 pix, 1/1.8", Color, 42 fps, USB 3.0, C - mount, Infrared cut filter

mvBlueFOX3-2 series

USB3 cameras with Smart Features

+ View all products

RT‑mvBF3‑2004	USB3 vision camera with Sony Pregius CMOS sensor IMX287
RT‑mvBF3‑2016	USB3 vision camera with Sony Pregius CMOS sensor IMX273
RT‑mvBF3‑2032a	USB3 Vision camera with Sony Pregius CMOS sensor IMX265
RT‑mvBF3‑2032	USB3 Vision camera with Sony Pregius CMOS sensor IMX252
RT‑mvBF3‑2064	USB3 vision camera with Sony Pregius CMOS sensor IMX178

CMHO series

Clamping mechanics for lenses

+ View all products

CMHO144

Clamping mechanics for TCxx130, TCxx144 lenses and LTCLHP144-X illuminators

Accessories

Accessories and add-ons to make the most of Opto Engineering^® lenses.

+ View all products

Optical filters

Filters for telecentric lenses and fixed focal length lenses

Company & Resources

Optical imaging technologies OE for the future Who we are A history of innovation Committed to quality Joint ventures Where we are Legal Product awards Corporate videos 2D and 3D models Image gallery Video gallery Search OE products by applications Application notes Basics Frequently asked questions Press Review Jobs at Opto Engineering^®

Fiscal code and registration number at Mantova Business Register 02011230204, Nr. REA: MN-216669, Share Capital: 200.000,00 €
Design & development by Opto Engineering® → SEO and consulting by Dipiemme Studio

Company & Resources

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT

Company & Resources

Follow us

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT