Company

Service

Resources

Basics

F.A.Q.

Support

Careers

Press Review

Optics

Lighting

Cameras

Software

Accessories

AI Vision Units

TC12064

Bi-telecentric lens for 1/2″ detectors, magnification 0.100 x, C-mount

Prev Next

Specifications

Magnification	(×)	0.100
Image circle Ø	(mm)	8.0
Object field of view (8)
with 1/3″ detector (4.8 x 3.6 mm)	(mm × mm)	48.00 x 36.00
with 1/2.5″ detector (5.70 x 4.28 mm)	(mm × mm)	57.00 x 42.80
with 1/2″ detector (6.4 x 4.8 mm)	(mm × mm)	64.00 x 48.00
with 1/1.8″ detector (7.13 x 5.37 mm) (7)	(mm × mm)	71.30 x 53.30
with 2/3″ - 5 MP detector (8.45 x 7.07 mm)	(mm × mm)	ø = 70.9
Optical specifications
Working distance (1)	(mm)	181.8
wF/# (2)		8
Telecentricity typical (max) (3)	(deg)	< 0.05 (0.08)
Distortion typical (max) (4)	(%)	< 0.04 (0.07)
Field depth (5)	(mm)	67
CTF @ 70 lp/mm	(%)	> 50
Dimensions
Mount		C
Phase Adjustment (9)
Length (6)	(mm)	225.9
Diameter	(mm)	100
Mass	(g)	1000

Notes

Working distance: distance between the front end of the mechanics and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion.
Working F-number (higher wF/#): the real F-number of a lens when used as a macro. Lenses with smaller apertures can be supplied on request.
Maximum slope of chief rays inside the lens: when converted to millirad, it gives the maximum measurement error for any millimeter of object displacement. Typical (average production) values and maximum (guaranteed) values are listed.
Percent deviation of the real image compared to an ideal, undistorted image: typical (average production) values and maximum (guaranteed) values are listed.
At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 5.5 μm.
Measured from the front end of the mechanics to the camera flange.
With 1/1.8″ (8.9 mm diagonal) detectors, the FOV of TC12yyy lenses may show some vignetting at the image corners, as these lenses are optimized for 1/2" detectors (8 mm diagonal).
For the fields with the indication "Ø =", the image of a circular object of such diameter is fully inscribed into the detector.
Indicates the availability of an integrated camera phase adjustment feature. If missing, it can be supplied upon request (except for TC23004, TC23007,TC23009, TC23012).

Dimensions

footprint

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

Buy this product

Please enter the desired quantity to calculate price and delivery time. For high-volume orders, please contact us.

Request a quote

Simply fill in the form below to receive a quote or to request further info about this product: a sales engineer will get back to you within 24 hours.

* Please note: all fields are required.

First name

Last name

Job description

Company

Address

City

ZIP code

Phone

Country

State/Zone/Department

Your message

* After submit we'll ask you to check your consense to use Your data

E-mail

Please, insert a valid E-mail and accept conditions.

: With this you authorize the treatment of your personal data and give us a consense to contact you in order to work on your commercial requests and to be able to send you our best offers to cover your needs. For more details, please, read here(MANDATORY)
: With this you authorize the treatment of your personal data and give us a consense to contact you and send you email newsletters about products, sales, events, company announcements and to be able to send you our best offers to cover your needs. Newsletter are sent (roughly) twice a month. We will NOT spam or abuse your email in any way. For more details, please, read here(OPTIONAL)
: With this you authorize the treatment of your personal data and give us a consense to contact you and send you our product catalog by traditional mail (every two years). For more details, please, read here(OPTIONAL)

Compatible products

LTCLHP series

High-performance telecentric illuminators

+ click to view all

LTCLHP064‑R	Telecentric HP illuminator, beam diameter 80 mm, red
LTCLHP064‑G	Telecentric HP illuminator, beam diameter 80 mm, green
LTCLHP064‑B	Telecentric HP illuminator, beam diameter 80 mm, blue
LTCLHP064‑W	Telecentric HP illuminator, beam diameter 80 mm, white

LTCLHP CORE series

Ultra compact telecentric illuminators

+ click to view all

LTCLCR064‑R	Telecentric CORE illuminator, beam dimensions Ø = 86; x = 67, red
LTCLCR064‑G	Telecentric CORE illuminator, beam dimensions Ø = 86; x = 67, green
LTCLCR064‑W	Telecentric CORE illuminator, beam dimensions Ø = 86; x = 67, white

LTLA series

High-power strobed LED low angle diffused ringlights

+ click to view all

LTLAC1‑W	Diffusive strobed low angle ring light illuminator - large size medium power white
LTLAC2‑R	Diffusive strobed low angle ring light illuminator - large size high power red
LTLAC2‑G	Diffusive strobed low angle ring light illuminator - large size high power green
LTLAC2‑W	Diffusive strobed low angle ring light illuminator - large size high power white

LTLAIC series (discontinued models)

Continuous LED low angle diffused ringlights

+ click to view all

LT2RZF120‑60‑2‑W‑24V	LED ringlight, 2 LED rows, 126.5 mm outer diameter, 60°, white, 24V
LT2RZF120‑60‑2‑R‑24V	LED ringlight, 2 LED rows, 126.5 mm outer diameter, 60°, red, 24V
LT2RZF120‑60‑2‑G‑24V	LED ringlight, 2 LED rows, 126.5 mm outer diameter, 60°, green, 24V
LT2RZF120‑60‑2‑B‑24V	LED ringlight, 2 LED rows, 126.5 mm outer diameter, 60°, blue, 24V

LTLAIC series

Continuous LED low angle diffused ringlights

+ click to view all

LT3RZF130‑60‑1‑W‑24V	LED ringlight, 1 LED row, 131.5 mm outer diameter, 60°, white, 24V
LT3RZF130‑60‑1‑R‑24V	LED ringlight, 1 LED row, 131.5 mm outer diameter, 60°, red, 24V
LT3RZF130‑60‑1‑G‑24V	LED ringlight, 1 LED row, 131.5 mm outer diameter, 60°, green, 24V
LT3RZF130‑60‑1‑B‑24V	LED ringlight, 1 LED row, 131.5 mm outer diameter, 60°, blue, 24V

LTLADC series

Continuous LED low angle direct ringlights

+ click to view all

LTZZO130‑75‑3‑W‑24V	LED low angle ringlight, 3 LED rows, outer diameter 131 mm, 75°, white, 24V
LTZZO130‑75‑3‑R‑24V	LED low angle ringlight, 3 LED rows, outer diameter 131 mm, 75°, red, 24V
LTZZO130‑75‑3‑G‑24V	LED low angle ringlight, 3 LED rows, outer diameter 131 mm, 75°, green, 24V
LTZZO130‑75‑3‑B‑24V	LED low angle ringlight, 3 LED rows, outer diameter 131 mm, 75°, blue, 24V

LTRNST series

LED ring illuminators - straight type

+ click to view all

LTRN064RD	Ring LED illuminator, inner diameter 100 mm, straight type, red 630 nm
LTRN064GR	Ring LED illuminator, inner diameter 100 mm, straight type, green 525 nm
LTRN064BL	Ring LED illuminator, inner diameter 100 mm, straight type, blue 470 nm
LTRN064NW	Ring LED illuminator, inner diameter 100 mm, straight type, white

LTBC series

Continuos LED backlight

+ click to view all

LTBC114114‑W	Continuos LED backlight, 114x114 illumination area, white
LTBC114114‑G	Continuos LED backlight, 114x114 illumination area, green

LTBFC series

Continuous flat side-emitting LED backlights

+ click to view all

LTPVR100‑00‑1‑W‑24V	Flat side-emitting LED backlight, 100X100 mm illumination area, white, 24V
LTPVR100‑00‑1‑R‑24V	Flat side-emitting LED backlight, 100X100 mm illumination area, red, 24V
LTPVR100‑00‑1‑G‑24V	Flat side-emitting LED backlight, 100X100 mm illumination area, green, 24V
LTPVR100‑00‑1‑B‑24V	Flat side-emitting LED backlight, 100X100 mm illumination area, blue, 24V

LTBRDC series

Continuous LED bar lights

+ click to view all

LTZPFL120‑00‑6‑W‑24V	LED bar light, 6 LED rows, 120X26.3 illumination area, white, 24V
LTZPFL120‑00‑6‑R‑24V	LED bar light, 6 LED rows, 120X26.3 illumination area, red, 24V
LTZPFL120‑00‑6‑G‑24V	LED bar light, 6 LED rows, 120X26.3 illumination area, green, 24V
LTZPFL120‑00‑6‑B‑24V	LED bar light, 6 LED rows, 120X26.3 illumination area, blue, 24V

LTCXC series

Continuous LED coaxial lights

+ click to view all

LT2QOG100‑00‑X‑W‑24V	LED coaxial light, 100x100 mm light emitting area, white, 24V
LT2QOG100‑00‑X‑R‑24V	LED coaxial light, 100x100 mm light emitting area, red, 24V
LT2QOG100‑00‑X‑G‑24V	LED coaxial light, 100x100 mm light emitting area, green, 24V
LT2QOG100‑00‑X‑B‑24V	LED coaxial light, 100x100 mm light emitting area, blue, 24V

CMBS series

45° beam splitters

+ click to view all

CMBS064

45° beam splitter with mount for 100 mm clamping diameter optics

CMMR series

45° first surface mirrors

+ click to view all

CMMR064

45° first surface mirror for 100 mm clamping diameter optics

WI series

Protective windows

+ click to view all

WI064

Protective window for 100 mm clamping diameter optics

CMHO series

Clamping mechanics

+ click to view all

CMHO064

Clamping mechanics for TCxx064 lenses and LTCLHP064-X illuminators

Accessories

Accessories and add-ons to make the most of Opto Engineering lenses.

+ click to view all

TCFILTER

Filter mount for telecentric lenses

LTPR series

LED patterns projectors

+ click to view all

LTPRHP3W‑W	LED pattern projector 3W, HP, white
LTPRHP3W‑R	LED pattern projector 3W, HP, red
LTPRHP3W‑G	LED pattern projector 3W, HP, green
LTPRHP3W‑B	LED pattern projector 3W, HP, blue
LTPRUP‑W	90W strobed LED pattern projector white
LTPRUP‑R	90W strobed LED pattern projector red
LTPRUP‑G	90W strobed LED pattern projector green
LTPRUP‑B	90W strobed LED pattern projector blue

Design & development by Opto Engineering → SEO and consulting by Dipiemme Studio