TC4M080-F

Telecentric lens for 1.2″ detectors, magnification 0.221 x, F-mount

Download datasheet

TC2M/TC4M series has been replaced by TC2MHR/TC4MHR series (except TC4M004-x, TC4M007-x, TC4M009-x): production will be discontinued on June 30, 2015. Contact our sales engineers ahead of such date to discuss any specific need.

Specifications

Magnification	(x)	0.221
Image circle Ø	(mm)	22.0
Object field of view (8)
with KAI-2020 14.8 mm diagonal w x h 11.84 x 8.88	(mm x mm)	53.7 x 40.3
with KAI-04050 16 mm diagonal w x h 12.8 x 9.6	(mm x mm)	57.9 x 43.4
with KAI-4022/4021 21.5 mm diagonal w x h 15.2 x 15.2	(mm x mm)	68.7 x 68.7
with KAI-08050 22.6 mm diagonal w x h 18.1 x 13.6 (7)	(mm x mm)	81.9 x 61.5
Optical specifications
Working distance (1)	(mm)	226.8
wF/# (2)		16
Telecentricity typical (max) (3)	(deg)	< 0.03 (0.10)
Distortion typical (max) (4)	(%)	< 0.06 (0.10)
Field depth (5)	(mm)	24.0
CTF@ 70 lp/mm	(%)	> 30
Mechanical specifications
Mount		F
Length (6)	(mm)	367.2
Diameter	(mm)	116
Mass	(g)	1360

Notes

Working Distance: distance between the front end of the mechanics and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion.
Working F/#: the real F/# of a lens when used as a macro. Lenses with smaller apertures can be supplied on request.
Maximum slope of chief rays inside the lens: when converted to milliradians, it gives the maximum measurement error for any millimeter of object displacement. Typical (average production) values and maximum (guaranteed) values are listed.
Percent deviation of the real image compared to an ideal, undistorted image: typical (average production) values and maximum (guaranteed) values are listed.
At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 4.8 μm.
Measured from the front end of the mechanics to the camera flange.
With KAI-08050 (22.6 mm diagonal) detectors, the FOV of TC4M yyy lenses may show some vignetting at the image corners, as these lenses are optimized for 1.2" detectors (21.5 mm)
For the fields with the indication “Ø =”, the image of a circular object of such diameter is fully inscribed into the detector.

Dimensions

footprint

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

PDF DXF IGS STEP

Notice

Sitemap

TERMS AND CONDITIONS OF USE

All materials on this website www.opto-engineering.com (and all other possible local domains of Opto Engineering), including but not limited to: audio, images, software, text, video clips, design, structure, selection, coordination, expression (next - the "Content"), contained on this website are protected by copyright under Italian copyright law, international conventions and other copyright laws.

Any copying, posting, reproduction, public displaying, modification, translation, distribution or other unauthorized use of the Content (including any portion or version thereof) is prohibited. Nevertheless, users of this website have the limited permission to view, print and distribute the Contents for personal informational purposes so long as any copy or other reproduction includes the above copyright notice. All other actions should be previously authorized in written by Opto Engineering.

You agree to follow all instructions on this website limiting the way you may use the Content.

The products, processes, technology and related information described in this website may be covered by one or more issued/pending Opto Engineering patents. No license or other intellectual property right are granted or conferred by this website or by anything appearing herein to such Opto Engineering products, processes or technologies.

On this website there are also represented the proprietary logos, service marks and trademarks. By making them available on this website, Opto Engineering is not granting any license to utilize those proprietary logos, service marks, or trademarks. Any unauthorized use of the Content may violate copyright laws, trademark laws, the laws of privacy and other laws connected.

If you send any communications or materials to the website by electronic mail or otherwise, including any comments, data, questions, suggestions, or the like, all such communications are, and will be treated as, non-confidential and non-proprietary. In consequence, you give up any claim that any use of such material violates any of your rights including moral rights, privacy rights, proprietary or other property rights, publicity rights, rights to credit for material or ideas, or any other right, including the right to approve the way Opto Engineering uses such material.

This website may contain links to other Internet websites on the World Wide Web. Opto Engineering provides such links for your convenience only, and is not responsible for the content of any website linked to or from this website. Links from this website to any other website do not mean that Opto Engineering approves of, endorses, or recommends that website. Opto Engineering disclaims all warranties, express or implied, as to the accuracy, legality, reliability, or validity of any content on any other website.

The product and/or service information set forth in this website may contain errors and omissions, may be outdated. No statement, representation or other information contained in this website should be construed as binding upon Opto Engineering contractually or otherwise the basis for any express or implied warranty. Please contact Opto Engineering for the most up-to-date information regarding specific products and services. Opto Engineering may also add, change, discontinue, remove, or suspend any other Content posted on this website, including features and specifications of products described or depicted on the website, temporarily or permanently, at any time, without notice and without liability.

Opto Engineering may add to, change, or remove any part of these Terms and Conditions of Use at any time, without notice. Any changes to these Terms and Conditions of Use or any terms posted on this website apply as soon as they are posted. By continuing to use this website after any changes are posted, you are indicating your acceptance of those changes.

These Terms and Conditions of Use and any additional terms posted on this website together constitute the entire agreement between Opto Engineering and you with respect to your use of this website. If for any reason a court of competent jurisdiction finds any provision of these Terms and Conditions of Use, or portion thereof, to be unenforceable, that provision shall be enforced to the maximum extent permissible so as to effect the intent of this agreement, and the remainder of these Terms and Conditions of Use shall continue in full force and effect. These Terms and Conditions of Use shall be governed by and construed in accordance with the laws of Italy.

Design & development by Opto Engineering → SEO and consulting by Dipiemme Studio