TC2M036-F

Telecentric lens for 1″ detectors, magnification 0.354 x, F-mount

TC2M/TC4M series has been replaced by TC2MHR/TC4MHR series (except TC4M004-x, TC4M007-x, TC4M009-x): production will be discontinued on June 30, 2015. Contact our sales engineers ahead of such date to discuss any specific need.

Specifications

Magnification	(x)	0.354
Image circle Ø	(mm)	16.0
Object field of view (8)
with KAI-2020 14.8 mm diagonal w x h 11.84 x 8.88	(mm x mm)	33.4 x 25.1
with KAI-04050 16 mm diagonal w x h 12.8 x 9.6	(mm x mm)	36.3 x 27.2
with KAI-4022/4021 21.5 mm diagonal w x h 15.2 x 15.2	(mm x mm)	Ø = 42.8
with KAI-08050 22.6 mm diagonal w x h 18.1 x 13.6 (7)	(mm x mm)	Ø = 38.4
Optical specifications
Working distance (1)	(mm)	102.5
wF/# (2)		16
Telecentricity typical (max) (3)	(deg)	< 0.03 (0.10)
Distortion typical (max) (4)	(%)	< 0.04 (0.10)
Field depth (5)	(mm)	9
CTF@ 70 lp/mm	(%)	> 30
Mechanical specifications
Mount		F
Length (6)	(mm)	222.3
Diameter	(mm)	61
Mass	(g)	490

Notes

Working Distance: distance between the front end of the mechanics and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion.
Working F/#: the real F/# of a lens when used as a macro. Lenses with smaller apertures can be supplied on request.
Maximum slope of chief rays inside the lens: when converted to milliradians, it gives the maximum measurement error for any millimeter of object displacement. Typical (average production) values and maximum (guaranteed) values are listed.
Percent deviation of the real image compared to an ideal, undistorted image: typical (average production) values and maximum (guaranteed) values are listed.
At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 4.8 μm.
Measured from the front end of the mechanics to the camera flange.
With KAI-08050 (22.6 mm diagonal) detectors, the FOV of TC4M yyy lenses may show some vignetting at the image corners, as these lenses are optimized for 1.2" detectors (21.5 mm)
For the fields with the indication “Ø =”, the image of a circular object of such diameter is fully inscribed into the detector.

Dimensions

Mechanical layout

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

DXF IGS STEP

Notice

Design & development by Opto Engineering → SEO and consulting by Dipiemme Studio